Dress of artificial silk, cotton cloth or plain color or plaid. One-piece, straight cut type shirts with slits on the bottom front panel. There is a similar insertion of basic or finishing of fabric with a zipper on three buttons. Weed out belt through the loops located on the waist line, and tied on the back. If you change the shape belt tied loosely. The dress can be worn without the belt. Vtachnoy sleeve, long sleeve with cuff. Collar single cut, lagging on the shoulder. 

Drawing style lines on the pattern (Fig. 267)

Style developed on the pattern of the basic drawing dresses. 

 3аднее panel (Fig. 267, a). At the shoulder cut right to postpone 1 cm and place the sprout cut a smooth line. From the depth of the cut of the armhole to the bottom to draw a line as shown in Fig. 267.

 The front panel (Fig. 267, b). From the depth of the neck at the mid front cloth down to postpone 30 cm, and from the point 30 to the left - the width of the insert (8 cm). Point 8 to connect with the end of the shoulder tuck. From the depth of the neck down to lay 10 cm For the setting of the fastener to insert from the point 10 and from point 30 to the right to defer 2.5 cm, plotting points to connect. 

 One-piece turn-down collar. From the top of the neck at the shoulder cut to the left to postpone 1 cm and the depth of the neck at the middle of the shelf down - 2 see Points 2, 1 connect, by continuing the line from point 1 to 9 cm, equal to the width of Rostock plus 1 - 1.5 cm (i.e., line terminations to sprout). From point 9 at right angles to the lines to delay 9 - 10 cm and from the depth of the neckline to the right - 4 see Issue unfastened piece collar smooth line, as shown in Fig. 267, b.

To move half of the shoulder tuck the side cut from the armhole to the waist to split into three parts and the upper point of division to connect with the end of the tuck. The depth of the cutout openings to connect with the bottom of the dress. For free movement hem line front cloth split in three parts and from the first point of division up to postpone the length of the slit, i.e., 8 cm 

 Cuff (Fig. 267,). To construct a rectangle with length equal to the line terminations of the sleeves (22 cm), width 6cm (optional). Rascles top cuff 1.5 cm Cuff may be straight-shaped. The bottom line of the rectangle is split in half and the dividing point up to postpone 1 cm to Draw the line terminations of the cuff, as shown in Fig. 267, V. Unfastened the cuff part to make parallel to the line terminations.
 

Obtaining the modified pattern and cutting (Fig. 268) 

 3аднее panel (see Fig. 267, a) be cut out of the pattern. Allow for seams at the shoulder cut 2 cm, to the armhole 1 cm, side cut 2. cm, hem 4 - 5 cm 

 Front panel (Fig. 268, a). For applying the pattern lines to cut. Half of the shoulder Darts to move in the lateral cut and the other half to leave the place. To do this, make a cut from the side of the cut by the end of the Darts, not dorezaya to 0.5, see the Second part of the Darts will go under the insert.

When cutting the cuff to allow for seams 0.7 cm on all sides. To otkroite upper collar to the insert (Fig. 268, b) at the bottom. 

The seam shown in Fig. 267, 268. 

Tailoring 

1. To celebrate the middle of all of the parts of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Processing obecnie loop (see feature 1) on the right side panels and waist to pull the belt.

4. To connect dresses with insert to insert a felling handle the corners on the front panel of the dress (item 3). To do this, cut Podkayne obtachku on the shape of the corner of the main fabric. Obtachku to impose a face on the front side of the part, tack on the width of the seam, when cutting this to the primary, then pricecat. In the corner to make nadziejko, cutting the main fabric and the facing, not dorezaya of 0.1 - 0.2 cm to seam primaqiune. Fold the facing towards the wrong side, straighten the seam, sweep, releasing the roll of main fabric.Allowance for this when cutting the neck of the insert (item 3), to bend towards the inside, priotity, apply the paste, combining the main lines of the pattern, and promette.

5. Baste shoulder seams of the back and shelves. To sweep the lower collar in the middle and metati it in Rostock, combining the lower seam of the collar with the middle of the back (when smachivanie the shoulder seams in the corner of the lower collar to make nadziejko).

Sew shoulder seams of back and front at the same time vracheva lower collar in Rostock. Baste and sew in the middle top of the collar seam to resaturate. Tack the collar to the bottom (the left side of the collar to primitivity seam from middle of collar to the bottom of the insert, and the right Vice versa). For ease of handling to remove the outline of primitivne insert, i.e., to the lower section of the insert was free.

To pricecat the top collar to the bottom pritchina on the bottom seam width 0.7 cm Seam primaqiune to resaturate. Remove the collar on the front side, straightening the seam, sweep, releasing the chute from the upper collar to the first button, first button to the bottom of the insertion roll to make by inserting. To iron, the inner section of the upper collar bend to the inside by 0.5 cm, stitch from the fold to 0.1 cm, to sprout back to manually sew over the seam primaqiune the bottom of the collar.

Re-baste part 3 on the lower section of the insert, Topstitch from the front side of the silk thread to match the main fabric seam width 0.5 - 1 cm 

6. Baste and sew the side seams.

7. Process vent (slit) at the bottom of the front cloth podkralas a facing width of 6 - 7 cm and a length of 3 - 4 cm long incision. Tack and pritchet seam width 0.3 - 0.4 cm obtachku, folded it and the product inside out (facing must reach the bottom of the binder plus 1 cm for the seam). At the end of the cut to make nadziejko, stitch across the facing from the sheathing of the bottom of the dress. Bend the slices obtachki inside out and pristroit (at the end of the section to develop mysyk).

The slot can be processed in the side seam (Fig. 268, b). The length of the slots from the bottom of the dress plus the binder to make nadziejko, not dorezaya to the side seam of 0.1 - 0.2 see the Seam from the notch to resaturate, and the side seam to press toward the front of the cloth.