Friday, 29.03.2024, 10:46
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » A hundred styles of women's dresses

Dress for the theatre or prom dresses with an open neckline

Dress of a plain or small pattern fabric moire taffeta, etc. (sizes 46 - 52). Bodice with a large open neck, cut along the flap and a small drape of the valves. The sleeve replaces the wing draped at the line terminations, which creates the appearance of the continuation of the draping on the bodice. The attached bodice without tucks.

Flared skirt with three inverted pleats at the front and rear panels, gently falling from the waist. Shaped line of the bodice can be applied to one-piece dress, not detachable on the waist line, keeping the pulley-block Darts. A dress of this style is recommended for young women. 

Drawing style lines on the pattern (Fig. 192) 

the Style developed by the pattern drawing tselnokrajnimi bodice with short sleeve. 

 3аднее flag (Fig. 192, a). At the shoulder the cut of the height of the sprout to the right to defer the 7 8 see the depth of the cut sprout in the middle of the backs of 8 - 10 cm (optional). Plotting points to connect a smooth line. From the neckline of Rostock at the shoulder cut right to defer the width of the shoulder 5 - 6 see Point 5 - 6 to connect with the deep armholes of a smooth line. 

 The wing backs. The length of the wing from the width of the shoulder, i.e., points 5 and 6 equal 13 - 15 see the direction of the line of the wing is a continuation of the shoulder cut. For the design of the wing armhole divided into three parts and point 13 - 15 to connect with the lower breaking point smooth line, extending it to the intersection with the derived line. On a wing for receiving a drapery apply cut lines, as shown in Fig. 192. Traveling tuck to split in half, half to put it in the middle of the back, and the other half move to the side cut off.

To obtain a flared skirt from the end of the pulley-block Darts to draw a line to the bottom. Traveling tuck to close. To expand the skirt at the bottom is 7 - 8cm and place cut side. 

 The front panel (Fig. 192, b). Shoulder tuck to move closer to the armhole. To do this, cut the shoulder from the second line of the tuck to postpone 8 cm and draw a line parallel to this line. The resulting line joining with the end of the shoulder tuck. Traveling tuck to split in half, half to put it in the middle of the shelves, and the other half move to the side cut off.

The pattern of the bodice at the waist cut off, then lines from the shoulder cut to cut a pattern, not dorezaya to the end of Darts at 0.5 cm Shoulder tuck to close, whereby the opening of the new tuck at the cut lines. 

The obtained pattern shelves (Fig. 192,) from the neck at the shoulder cut to the left to defer 7 - 8 cm from point 7 - 8 down a - 8 - 9 cm Depth of neck 12 - 13 see Point 8 - 9 to connect with the depth of the neck, i.e. with the point 12 or 13, smooth line. From the neck at the shoulder slice to the left by the width of the shoulder to defer 5 - 6 cm and from that point draw a line parallel to the first. 

Point 8 - 9 down to continue the line also, 8 - 9 cm and divide it into three parts, then to hold the cut patterns in the side of the mid-shelf parallel to the neck. 

 Valve. From the angle of the neck to postpone the width of the valve equal to the width of the shoulder, i.e. 5 - 6 see the scribed line to split in half and the points of division to defer up to 2.5 cm. Decorate the toe valve, as shown in Fig. 192, Second line valve to hold the first parallel and of equal length. On the second line of the shoulder tuck from the shoulder cut down to delay period equal to the length of the shoulder. Received point to connect with the deep armholes of a smooth line. 

 The wing shelves. The length of the wing from the width of the shoulder, i.e., from point 5 - 6, 13 - 15 cm From the shoulder cut along the second line of the tuck to delay down 15 cm.

Points 13 to 15 and 15 to connect a smooth line. To obtain draperies to apply cut lines, as shown in Fig. 192, V. 

To obtain a flared skirt from the end of the pulley-block Darts a straight to the bottom and then line the bottom side of the cut to continue on the 7 8 see

pattern pieces are numbered and show the direction of the grain lines.
 


Obtaining the modified pattern and cutting (Fig. 193) 

 Backrest (Fig. 193, a). To the shoulder cut of the back to attach a shoulder of the shelf (item 7) and find no seam at the shoulder cut. On the bottom slice of the shoulder to give an allowance of 3 to 4 cm for terminations buttons. 

 The rear panel of the skirt (Fig. 193, b, C). By applying the line pattern cut from the bottom up, not dorezaya to the end of tackle Darts of 0.5 cm Tackel tuck close, due to what happens rascles skirt on the bottom. The resulting pattern (Fig. 193,) to be expanded to an inverted pleat at 14 - 16 cm the Middle of the pattern to move away from the fold of the fabric for the inverted pleats at 12 - 14 cm 

Front panel skirts to find similar back. 

 The shelf (Fig. 193, d). At spaced lines from the valve pattern cut, not dorezaya to the middle of the front by 0.5 cm, and push part of the patterns for draperies for 2 - 3 see

 the Wing (Fig. 193, d). Connect the shoulder seams of the wing proper and the backrest. Make undercuts for applying lines and to expand parts of the pattern 2 - 3 cm for draping. 

The seam and stocks is shown in Fig. 193.
 


Tailoring 

1. To celebrate the middle of the back and shelves, rear and front panels of slip-stitch. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew in the middle of the front and the back, the seams resuturing. 

4. Baste and sew the side seam of forepart and backrest. 

5. Processing podkralas the facing shoulders backless with a halter neck of Rostock. To cut corners, the bend facing towards the inside, releasing the roll from the back and shelves. The second section of piping to bend 0.5 cm and hem by hand.

6. Handle loop on the flap one or two obrazkami and the valve on the shelf podkralas the facing. The facing needs to be valve 0.5 cm to the Bend facing towards the inside, straighten seams, releasing the roll from the shelves. 

7. Lay two soft pleats on the front and wings. 

8. To put a hanger on wings and sew hidden stitches from the inside out. Slices shelves and wings to the shoulders to sew a cross seam. 

9. Sew the side seams of the skirt. 

10. To lay waist inverted pleats, tack. 

11. To connect the bodice to the skirt. 

12. Hemming and pritority the bottom of the skirt.



Category: A hundred styles of women's dresses | Added by: 20.10.2017
Views: 470 | Rating: 0.0/0

Total comments: 0
avatar