Dress of thin woolen or cotton fabric solid color or small patterns (sizes 48 - 64), one-piece, with undercuts from a single cut shoulder seam and side flaps, fastened to a soft crease. Front one-way pleat. Back straight. Vtachnoy sleeve, three-quarter. The one-piece collar, zipper on three buttons.

A dress of this style can be recommended for the expectant mother as well as full figure. For the expectant mother it is convenient that as the fullness with deep pleats valve can be perestayut. 

Drawing style lines on the pattern (Fig. 264)

Style developed on the pattern of the basic drawing dresses. 

 The front panel (Fig. 264). To build telecronaca collar depth neck connecting with the top of her, continuing the line of 8 cm, i.e. the width of the cut of the Rostock plus 1 - 1.5 cm From a point 8 at a right angle to postpone the width of the collar, i.e., 8 - 9 cm and left 1 cm From the top of the neck right to postpone the escape width of the collar (12 - 15 cm) and the depth of the neckline down to 6 cm For the length of the clasp from the point 6 to the right to postpone 2 cm and for the neck to the left - 2 cm. to Make collar, as shown in Fig. 264.

To design curly podraza from the depth of the armhole down to postpone 4cm and the point 4 to connect with the middle of the pulley-block Darts. On the lines to the left to defer 6 cm and from point 6 down - 8 see Point 8 also connecting with the middle of the pulley-block Darts. To obtain soft folds in the undercut of the valve to hold the line of the cut pattern to the bottom. 

To move the shoulder Darts at the waist to connect the end with the end of the pulley-block Darts. 

Pattern pieces are numbered and show the direction of the grain lines. 

Obtaining the modified pattern and cutting (Fig. 265) 

 3аднее flag to find the pattern of the basic drawing dresses unchanged. 

 The front panel (Fig. 265). Lines for applying a pattern to cut from point 4 along the side cut to the middle of the tuck, then to point 8 and to the bottom line, not dorezaya 0.5 cm Make a cut from the end of the pulley-block Darts, not dorezaya to the end of the shoulder 0.5 cm Shoulder tuck to close (putting part of the pattern b to a), thereby opens new enlarged tuck on the waist line.

For soft pleats in relief valve to take the side of the pattern at the cutting lines on the 5 - 6 cm to the left. When the cutting work for one detail. To otkroite piping for handling of the valve (shown by hachures). 

On one-way pleat in the middle front of the cloth to give an allowance of 6 - 7 cm and the bottom line for the binder - 5 cm.
 

Tailoring 

1. To celebrate the middle of the front and rear panels dress slip stitch. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew the Darts on the back, to press them to the middle of the back of the cloth.

4. On the front panel of the dress is shaped at the cut lines not be done before handling the valve. Handle loop on telekrona the valve, then fold Podkayne the facing and the valve face inside, baste, and sew from the wrong side on the snare. Thereafter, on applied shaped line to cut, stepping back from the seam stitching 0.5 cm, turn the valve on the front side, straightening the seam. Thus it is possible to obtain one-piece valve due to the depth of the tuck, and under the valve lunge fabric on the main part of the dress.For ease of processing to align the line of cut, for which a piece of cloth cut in the form of a valve with the seam on 1 - 1,5 cm cut out of the same thread. Bend the cut of the dress, tack the piece of tissue transfer, seam, pritchet. Allowance for this when cutting on the bottom slice of the part to bend towards the inside, tack a transfer bead on a shelf, combining snare, and pritchet inseam, simultaneously grinding off podkraj valve with a cut piece of tissue. To lay soft folds and attach them under the flap. Sewing on a button after the second fitting.

5. Handle loops on the front panel of the dress. The first loop should be placed 1.5 cm from neckline and the edges of prosanos, the distance between the hinges at the 6 see 

6. Baste and sew lower collar in the middle, the seam resuturing. To votati collar in Rostock, baste and sew the shoulder seams shelves and back, at the same time vracheva collar in Rostock.

7. Cut the front panel along the fold crease at the 18 - 20 cm down to the clasp. The stock bend on the front side along the fold of prosanos, tack the rest of the fabric to the lower cut of the collar and pricecat. Tack the collar to the bottom, in the corners of the collar to put. To pristroit simultaneously with polysensor. The left side of the zipper to handle lining fabric. 

The second cut the upper collar in Rostock to sew hand stitches for the seam primaqiune. 

8. Baste and sew the side seams and resuturing. 

9. To votate and vacate sleeves in armhole. 

10. Hem the bottom of the dress, to iron and to sew.