Sleeveless , wool, cotton fabric, plain or plaid, pinstripe (sizes 44 - 50), cut at the waist. 


The neck tselnokrajnie valves with soft crease. 


The skirt, slit pockets, ending with a soft crease. 


The back straight, on the back panel of the skirt one-sided fold. 


Sundress this style can be recommended to full women. 


Drawing style lines on the pattern (Fig. 236) 


the Style developed by the pattern of the basic drawing dresses. 


 The rear panel (Fig. 236, a). From the depth of the cut sprout in the middle of the back down to postpone 8 cm and from point 8 to the right and 7 cm to Expand Rostock at the shoulder cut into 4 cm, place the cut (depth and width of cut of the Rostock, if desired). Deepen armhole at the side cut into 3 - 4 cm and place it. 


 The front panel (Fig. 236, b). From the depth of the neck down to postpone 16 see Point 16 to connect with the first line tuck at the shoulder cut. Held the line to split in half and the dividing point delay down to 2 cm, from a point 2 at a right angle to line 8 cm from point 8 the top - 1,5 cm 1,5 Point to connect with point 2, then from point 2 to the left to defer 4 see the resulting point to connect with the first line tuck. From point 8 draw a line down, parallel and equal to the first line of the tuck. A tuck to move to the left closer to the armhole. Deepen armhole at the side cut into 3 - 4 cm to Make it.


A line cut of the bodice from the skirt is at the waist. When cutting of the plaid fabric to create a diagonal direction of cells strappy line podraza to continue until the armhole.. 


the skirt to apply a line of the pocket. From the waist on the side to cut down delay to 10 cm and the second line of the tuck - 8 see Point 8, 10 connect and continue the line for side cut 2 cm for the soft folds. Point 2 to connect with the bottom line. 


Pattern pieces are numbered and show the direction of the grain lines. 


Obtaining the modified pattern and cutting (Fig. 237) 


caused to the lines On the pattern to cut. 


 Back (Fig. 237, a) be cut out of the prepared pattern. 


 3аднее cloth skirt (Fig. 237, b). The middle of the pattern to move away from the fold of tissue to a depth of unilateral pleats, i.e., 8 cm hem, pleated sause 2 cm 


 Shelf (Fig. 237, in). On the put the lines on the pattern to make the undercut from the first line of tackle Darts to point 4 and through valve to the point of 1.5, continuing the cut to half the depth of the tuck. 


When cutting out plaid fabric (Fig. 237, g) slitting the pattern before reaching the line of openings of 0.5 cm and push on the 4 see Part of the shoulder cut to the neckline to remove the fitting.


 The front panel of the skirt (Fig. 237, d). By applying the line pattern cut from the side of the cut, traveling tuck close, and half to keep her soft folds. From tuck in the side of the slice to postpone 2 cm and from point 2 to the line side of the slice to otkroite burlap pocket. Length burlap 10 - 14 see 


the seam shown in Fig. 237.
 

Tailoring 

1. To celebrate the middle of the back and shelves front and rear panels of the skirt. 

2. To continue the snares on the main lines and shaped patterns. 

3. Baste and sew the Darts on the back and the shelf. 

4. At the top of the shelves to make a slit valve in the line of tuck, then tuck the line into 5 - 6 cm, stepping back for a tuck at 0.7 cm for the seam. To the bottom slice to pritchet obtachku for terminations buttons. Slices main part to bend 0.5 cm, baste the facing slanted stitches (seam translation), then sew from the inside inseam. On the valve handle obecnie loop (see here).

5. Processing podkralas facing the lower part of the neck along with tselnokrajnimi valve. Fold the facing and the product inside out, sew, equating slices (one slice of piping sew with cut tuck). In the depth of the neck to make nadziejko, not dorezaya to the seam primaqiune 0.1 - 0.2 cm, fold the facing towards the wrong side, straighten the seam, releasing the roll from the primary details, to sweep, to iron. 

6. Baste and sew the shoulder seams. 

7. To handle the sprout and the upper part of the neck obrazkami. 

8. Baste and sew the side seams of the back and shelves. 

9. Processing podkralas the armhole facing.

10. Baste and sew one-way pleat on the back panel of the skirt. Baste and stitch Darts. 

11. To handle pockets on the front panel of the skirt.

At the entrance line to the pocket to bend the front panel on the front side so that the fold went from point 2 (shown in Fig. 237, d). To the upper cut of the pocket to attach the burlap from the main fabric, folding inside out and equalizing sections, then pricecat, continuing the line to bend the soft folds. Peel back the burlap to the side inside out, straighten the seam, releasing the roll from the primary by 0.1 - 0.2 cm, to sweep, to iron (turned soft crease). To the upper cut of the pocket to tack and pricecat the sacking of lining fabric, folded it inside out.Piecing together the seam to press in the direction of the burlap. To impose a processed upper part of the pocket on the front panel of the skirt, aligning the snare, to consolidate on the cut side, then sew the seam of the burlap.

12. Baste and sew the side seams of the front and rear panels of the skirt. 

13. Tack and pricecat the bodice to the skirt. 

14. Hem bottom of dress, to iron and to sew.