Dress with knit trim for
the Old product (Fig. 377). Dress of woolen fabric, cut at the waist, sleeve vtachnoy. The second product (Fig. 377 b). Jumpers & pullovers of knitted fabric, sleeve vtachnoy, long.
New product (Fig. 377). Dress cutting through the waist with the belt on the skirt, sleeveless shirt casual. Front dress with pockets, fastened with a zipper. Yoke, collar, inserts on the shelves, back, sleeves and skirt is made of knitted fabric.
Construction drawing of the model (Fig. 378). Back. With the main component, is applied to a breast line, a line limiting the width of the back. The side cut is at the middle of openings Г1Г2 = Г2Г4 = 6,3 cm further deepening the openings 4 see Extension of the backrest at the point P3 - 1 see П3П31 = 1, see the Line of openings is made through the points P1, П31, 1 smooth line. From point A down deferred 22 see Point G connects with a shoulder point P1 and T4. Knit insets width 7 cm Shoulder tuck on the back closed and transferred to the seam primaqiune yoke.
Before. With the main component, is applied to a breast line, a line limiting the width of the chest. Further deepening the openings 4 see Г22 = 4 see Extension at the point P6 - 1.5 cm П6П61 = 1.5 cm Line of openings is made through the points P5, П61, 2 smooth line. Planned location of the yoke on the front. From point A5 to bottom vertically is delayed 20 cm Connected to point P5 and G3 at the closed tuck. Part of the breast is transferred tuck in the seam primaqiune coquette, the part remains on the landing. Points G3 and T3 are connected by a straight line. The width of the knitted insert 7 see
From the point T8 down delayed 0.7 cm, a dot kzt81. The bottom line is through the points T3, kzt81.
Sleeve (Fig. 379). For sleeve shirt casual characteristic minimum landing sleeve, and sometimes the lack of it.
Are the two mutually perpendicular lines with the intersection point O1. Up vertically from the point O1 is the cut equal to the height of the top part 12, see О1О12 = 12 cm From the point O1 to the left and right segments are deposited О1Р1 and О1Р2 equal to half the width of the sleeves. О1Р1 = О1Р2 = 20 sm О1Р2 and О1Р1 divided from means restores the perpendiculars, on which the segments are deposited, is equal to WP1 = 7.5 cm; РлР3 = 8.5 cm
From the left point R2 and the point R1 to the right are laid cuts, equal to 4 cm, put the points P12 and P11.
Line of lifts the sleeve is carried out through the points P12, P3, A12, 1, R11, smooth line.
From the point A12 to bottom vertically is delayed a period equal to the length of the sleeve, a dot M1. О12М1 = 58cm.
From the point M1 to the left and right segments are deposited, is equal to half the width of the sleeve at the bottom, put the point M and M2.
MM1 = М1М2 = 10 see
Point P2, M P1, M2 are connected by straight lines. From points P2, P1 on the straight down deposited 20 cm, respectively put point 2,3. The side sections of the sleeve are held through the points P12, 2, M and R11, 3, M2 smooth lines.
From the vertical line defining the middle of the sleeve, left and right is delayed 12.5 cm Middle part of the sleeve is cut in the shape of a fabric, side part, from Jersey.
Skirt (see Fig. 404) . Cuts out on the basis of duhovnoi skirt with belt. The layout of the parts cut are shown in figures 380, 381.