Straight line dress with sleeves zelenolistnye
the Old product (Fig. 391 a). Dress-suit of wool fabric or knitted fabric straight silhouette. Jacket with front zip. Sleeves vtachnye. Skirt video double seam.
New product (Fig. 391 b). Straight line dress with a detachable waist. Sleeve zelenolistnye. Shoulder line straightened, supported shoulder pad thick 1 cm, cut to shape, like set-in sleeves. Joints can be finished with embroidery. Collar - otvorotka stand slightly behind the neck. The waist line emphasizes Podkayne the belt below the waist line, and simulates a high yoke.
For the manufacture of this model requires an additional 65 cm of fabric with a width of 142 see
Construction drawing of the model. Before (Fig. 392). To build patterns of the front take the base design of the product with zelenolistnye sleeves, encircle it on paper, then make some changes in the shape of a sleeve. To do this, connect the point M11 with the point T6 straight line; divide it into 3 parts, then on lines 1-3 lay 5.5 cm, on the line 2-4 lay 4 see Issue clinofibrate the lower section of the sleeve, connecting the dots M11 / 4 / 3 / T6 smooth curve line.
Outlines structural-decorative line. From point A4 at the shoulder cut lay the segments is equal to:
А4А14 = 7,5; А4Р = 26 cm; А4Р1 = 44cm.
On waist line from point T8 to the left lay the cut is equal to 11 cm, and denote the point T18. From the point T6 on the line of the cut sleeve postpone cuts:
Т6Т61 = 6 cm; Т6Р2 = 27 see
Points A14, T18, R, Kzt61, P1 and P2 connect the straight lines. According to the obtained lines before you cut. Parts K and L cut out of the extra fabric.
Back (Fig. 393). To build the curves of the back take the base design of the product with zelenolistnye sleeves, casting on paper and make changes to the shape of the sleeve. This M13 is connected to the point T5 by a straight line and the line segment divided into 3 equal parts, lines 5-7 lay 5.5 cm, on the line 6-8 lay 4 see the Lower section of sleeve draw up, connecting the dots M13, 8, 7 and T5 smooth curve line.
Outlines structural-decorative line. With this purpose, from the point A12 at the shoulder cut on the extension sleeve delay periods is equal to:
А12А112 = 7.5 cm; А12Р11 = 26 cm; А12Р111 = 44 cm
On waist line from point T to postpone period, equal to 11 cm, and denote the point t0. From point T5, the line of the cut sleeve postpone cuts:
Т5Т51 = 6 cm; Т5Р12 = 27 see
the Point A112 and t0, P1 and Kzt51. Р111 P12 and connect straight lines. According to the obtained lines the back cut. The details of K1 and L1 cut out of the extra fabric.
Collar (Fig. 394). Build a right angle with the vertex at point O. From point O up to the normal delay value of the rise of the middle collar, equal to 11 cm CQ = 11 cm From point O on a horizontal side of the angle lay 14.5 cm and put a point A. Point A and connect with a straight line. In the middle of restoring a perpendicular and on it lay a segment equal to 3.5 cm.
Line vrachevanie collar carried out with a smooth curve connecting the points In a, 2 and A. the Width of the collar in the middle of BB2 is 8 cm, the ends of AB1 - 13, see Point B2 and B1 connect by a straight line. In the middle of restoring the normal (3-4), and on it lay b, see the Line of departure, draw a smooth curve connecting the points B2, 4, B1. The skirt is cut on the basis of the design duhovnoi skirt (see Fig. 404).
The layout of the parts cut are shown in figures 395, 39B.
Straight line dress, cut at the waist line
The old product (Fig. 397 a). Dress wool or of knitted fabric cut at the waist line. Polarella sleeve cuffs. The skirt is slightly extended to the front of the skirt laid unilateral folds.
New product (Fig. 397 b). Dress cutting through the waist, straight silhouette. The sleeves are supported zelenolistnye shoulder pads with a thickness of 0.7-1.0, see Constructive lines can be trimmed with piping or braid. Collar and cuffs are made of knitted dewasa.
Skirt with vented hem three-seam video seam of the front. The waist line is emphasized by the belt width 2.5 cm
Construction drawing of the model (Fig. 398). Before. To build the front take the base design of the front of the product with zelenolistnye sleeves, encircle it on the paper and cause a new constructive and decorative lines in accordance with the model. From the highest point of the neck from point A4 at the shoulder cut lay cut, is equal to 12 cm, and put a point A7. At the waist from the point T8 lay 11 cm and the resulting point indicate T18. Point P7 connect a straight line with a point T18. From the point A7 down on the line lay 7.5 cm and put a point П70.
From the point M downward along the hem of the sleeves lay 2.5 cm and put a point M0. Then the point M0 and П70 connect with a straight line. The sleeve shortened to b cm - width cuff.
Along the lines of the middle of the front, embossed and lines М0П70 before you cut. Items To cut out of the extra fabric.
The backrest (Fig. 399). In the drawing take the base design of back products with zelenolistnye sleeves, encircle it on the paper and cause a new constructive and decorative lines.
From the highest point of the neck A12 delay period, equal to 12.5 cm, and denote the point P17. At the waist line of the back from point T lay 11 cm and put a point t0. Points P17 and t0 connect with a straight line. Down from point P17 delay period equal to 8.5 cm and put a point П170.
From the point M2 down the line of the bottom of the sleeves lay 2.5 cm and put a point M12.
Point M12 and P701 connecting a straight line. The sleeve is shortened by 6 cm - width cuff.
Along the lines of the middle of the back, relief and line М12П170 the back cut. Item K1 cut out of the extra fabric.
The skirt is cut on the basis of the design duhovnoi skirt, adding a seam allowance to the slot (Fig. 400).
The layout of the parts cut are shown in figures 400, 401, 402.
Cuffs and collar can be done manually on the spokes or use outdated garment.