You'll need:
- knit fabric (elastic);
six eyelets with washers (inner diameter 5 mm);
cord, thickness 3 cm
Parts cut:
- back and front of the top of one piece (must be the bends!)
Allowances:
- on the seams of the product and its slices, half an inch;
on ACC bottom - no more than four inches.
Job description:
Keen and prostrochite on the sewing machine side seams of the product. Allowances, which are on a slice Golovinka backless need zautyuzhit on the wrong side and then stitch from the front side of the top at a distance of not less than one centimeter. The seam allowance over the cut openings also soutiiwest on the wrong side. Back ustrahivaya along the armholes and neckline at a distance of one centimeter to the side seams. The cord is cut into two equal pieces. The obtained segments of the cord devaysa to the details of the drawstring in back armholes. The rear ends of the segments of the cord nastraivatsa in the side seams.Before top should defer along the arm openings. On the front of the top punched eyelets in the previously applied marking (it is recommended on the reverse side of the product to enclose the flap of cloth, folded in half). The front ends of the cords are pulled out from the front openings through the side blocks, then pass through the second blocks, and again drawn through the middle of the eye outward. The ends of the cords tied in a bow. The seam allowance over the cut Golovinka forehand turns inside out and very carefully nastraivatsa. The main thing - not to touch the washer eyelets.The hem tucks on the value of allowances and prostrachivajut from the front side of the top.
|