Skirt lined

Skirts made of fabrics of high elasticity to maintain the shape of the manufactured lining. Lining cut out lining fabric in the color of the upper material. Skirt and lining are treated separately and are interconnected at the upper edge. Along the length of the processed bottom edge of the lining should be flush with the cut allowance for bending the bottom of the product. Before you reveal the lining deytroyt. To ensure that the forms lining the top of her raskraivajut on the details of the cut top without allowances at the fold.Above the fold (in the presence of folds on the model) on the lining to ensure freedom of movement of the projecting seam, ending with a cut.
When cutting lining mark lines and Darts on the side sections. They grind along the planned lines, leaving nistatinum the area of the seam above the zipper and slits. Slices of overcast stitches on emergency vehicles. The bottom of the cut is treated with a seam bodybu closed slice width 0.5 - 0.7 cm with fixing of machine stitching at a distance of 0.1 cm from the internal bent edges.
When the wet-heat treatment of the lining in order to avoid thickening of the iron Darts towards the location of the Darts on the top or in the opposite direction. All the seams lining rautureau with simultaneous septugenarian slices on the left Nesmachnyi sites.
The bottom of the lining seam zastrugivajut bodybu closed slice width of 1 - 2 cm on the sanding machine or on emergency vehicles zigzag stitching. Treated lining put in a skirt, combining the inside and equalizing line tucks, seams, and upper cuts. Primitivna performed at a distance of 0.7 cm from the top of the slices a running stitch straight stitches with a length of 1.5 - 2 cm, or off highway. The fastening area lining scribbled on allowances of seams. When processing of the upper edge fixed at the same time cuts the top of the skirt and lining. 

Skirt on the belt

Depending on the models of skirts are manufactured on the belt. The yoke may be lined without it. Processing flirts, and connect them with skirts perform as indicated in Chapter 1, p 6. Feature in the processing of coquettes is buttonhole cuts.

FINAL TRIM SKIRT

Depending on the model the skirt outline and overcast the loops on the belt and finishing details. Buttonhole loops performed on special machines with silk threads in color of the basic material. The ends of the loops secured at the same time with the buttonhole. Before wet-heat treatment the cut ends of the thread, remove the thread stitches of a temporary assignment podzeplje their peg clean off the chalk powder with a brush or piece of cloth, the same color with the product, the product is purified from the production of dust. The folds of the skirt is bonded straight or cross stitches at a distance of 1 cm from the bottom (each separately).
Wet-heat treatment of the skirt produced through the wetted protohellenic from the inside of the skirt, beginning with the hot zone. Then priorivet cloth skirt from the left side seam, not capturing the bottom of the product. In the process of wet-heat treatment product priorivet under the allowances of Darts, seams, folds for fingerprints. Turn the skirt on the front side and lay the bottom edge to the running. The top edge folded to the side and perform prutivka bottom with a gradual movement of the product. Front side skirt is removed Lasy and produce steam spetsapparat or iron.The product is left in limbo for 2 - 3 hours for complete drying. Then, in accordance with the technical specifications sew hooks or buttons (see the table. 2).