The bottom of the skirt, depending on the model and the properties of the fabric can be processed in various ways: by the seam bodybu closed cut (Fig. 85, a, b), the seam bodybu open cut, topstitched, banded or covered with tape (Fig. 85, V, g, d).

Securing the lower edge of the skirt perform on emergency vehicles blind stitch blind stitch or hand stitching. Slice bends on the wrong side of the skirt along the line of bending and zametyvayut at a distance of 0.5 - 0.7 cm from this line on emergency vehicles or by direct manual stitch length 2 - 2.5 cm from the allowance for ACC. Before a secondary cover your ACC bottom recommended pritority the bottom of the skirt from the inside through moist protohellenic, at the same time pritoria under the allowance for ACC.Zametyvayut the bottom on emergency vehicles or manual straight stitch at a distance of 0.3 - 0.5 cm from the edge from the ACC, combining the lines of the side seams.

Hem bottom of the skirt on emergency vehicles blind stitch or hand stitching with a frequency of 3 to 4 stitch per 1 cm Machined hem skirts priorivet through moist protohellenic from the ACC, with the work of the lower edge to working. 

When machining the bottom of the skirts, with connecting folds, the allowances for pleats netscout at the location of the anchoring region, not reaching the lines connecting joints by 0.2 - 0.3 cm Lower section seam rautureau.

In mass production the manufacture of skirts, lower cut sutured without zamatyvala to do this when you trim strike a chalk line from the inside of the skirt at a distance twice the width of the ACC. To lines when suturing know the lower section.