Saturday, 23.06.2018, 14:53
Welcome Guest | Sign Up | Log In

All about sewing

Site menu

Section categories
Soviet costume
Czech Republic
Log In
Site friends

Total online: 1
Guests: 1
Users: 0

Home » Articles » National clothes » Uzbekistan

Dress with front tselnokrajnimi

In Fig. 360. shown dress with tselnokrajnimi front. Thanks to the ingenious shape of this dress's collar can be designed for special occasions. 

Dress is made of compacted solid fabric of any quality. Stan laid in soft folds that converge at the Cape yoke back. Sleeve long, extended downward, hemmed at the edges wide scar. The bottom sleeve can be finish shaped cuff. Collar recumbent, asymmetric. Zipper placket on the left shoulder of the dress. The end of the collar of the back side are sewn into the slit in the shoulder. 

Construction drawing dress patterns dresses 

On the main drawing patterns dresses need to make the following changes (Fig. 361). 

 Flirty backless. From the point C down to 16 cm delay, to put an end to and attach it to point G. 

 the Mill back. From point A down delay of 16 cm, to mark a point K1. Points K and K1 to connect the dotted line, continuing it beyond the point K1 at 25 cm, then connect with bottom line, as shown in Fig. 361.

 Front of dress. Points B2 and G1 to connect the auxiliary line on which from the point G1 to the left to defer 9 cm and place the point of K2. Bottom line from the point N1 to the left to defer 15 cm, denote the point N3. Point N3 connecting point K2, and the point K2 with the point B2. From the points K2 and D3 to defer to the left at 5 cm folds to mark points K3 and H4 and connect them with a dotted line (when cutting from point to point K3 K2 do the undercut). 

 Mill the front. From the point G1 to the right of the auxiliary delay line 16 cm, to put the point G2. From the point of G2 up to defer 3 see bottom line from the point N3 to the right to defer 25 cm, denote the point H4. To connect with a dotted line, as shown in Fig. 362, point B1, 3 cm, H4 and N3 - get the extension on the folds.

 Collar (Fig. 363). The collar is built on the plan of the drawing pattern dress with an open shelf and plotted as shown in Fig. 363 When cutting the two halves of the drawing pattern of the collar fold line right side and cut without a seam on the right shoulder (the collar cut after trying on dresses and check the neck on the figure). 

 Sleeve (Fig. 364) - long, Breakfast is luxurious down to 4 see All the other segments in the drawing are given in digital notation.

Cutting and tailoring dress 

To lay out the pattern on the twice folded tissue. Draw parts to add to the seams. The collar and the yoke to do on the lining to outline the centers and prometti shapes of the parts. Lay pleats on the back and the front of the mill, strictly calculating their width, to connect the front and seams of the mill. Sew the yoke. Sew the side sections, to sew the right shoulder seam of the yoke. Handle cut-clasp, sew it with lining yoke.

Collar sweep with a lining so that the top was slightly wider than the lining, stitch, turn, smooth. Tack to the neck of the dress and the end to sew shoulder seam on the left side. To handle the clasp at the shoulder cut so that the shoulder of the front was covered a shoulder backless. Both of the shoulder to hem cut straight stripes. Shoulder backless lengthen 2 cm for the buttons. The closure zastrochit 2 cm from the sleeves, and on to the neckline to sew buttons or hooks. The neck to hem oblique stripe fabric width of 1.5 cm (ready to cut the strip need 2.5 cm). Collar finished with three buttons.

Sew the sleeve hem on his hands with a seam width of 3 cm and collect the crown, votati (votevets and sewn sleeve the sleeve). The bottom of the dress to hem on hand.

Category: Uzbekistan | Added by: 08.11.2017
Views: 36 | Rating: 0.0/0

Total comments: 0