DRESSY VEST FOR WOMEN'S DRESS
Vest to the Uzbek dress made of a monochromatic fabric pale tones on a light lining. In Fig. 399 shown elegant vest, decorated with embroidery on the edge. Clasp on large buttons or hooks. The side of the vest slightly sacosan. According to waist back and front - shallow tucks that can be made narrower or wider than the desire, and the length of the vest.
Construction drawing patterns vest
On the main drawing patterns Uzbek dresses need to make the following changes: from point A down the delay to measure the length of back 40 cm and place the point T (Fig. 400), which continue to the right until it intersects with the line of the front and mark the point T1. The neckline of the back should be deepened by 2 cm, which from the point And down to postpone 2 cm from point P is 2 cm up and connect them with a smooth curve, as shown in Fig. 400.
Armhole bottom to deepen the about 2 cm and connect the point 2 cm from the points C and b, as shown in the drawing.
Front of vest. From point B1 to defer on the shoulder down 2 cm, at the waist line from the point T1 to the right to defer 5 cm, and these points connect a straight line - get the neckline of the front.
On the back from point T to postpone the right 7 cm, point 7 cm to defer up to 10 cm down to 7 cm to Construct a dart with a width of 2 cm to Mow the side of the back and the front at 3 cm, continue the line down to 7 cm.
On the shelf vest from the point T1 to the left to set aside 10 cm, from the up and down delay to 10 cm to Build a dart with a width of 4 cm For the hem of the vest to connect the point 10 cm from a point 5 cm, as shown in the drawing, - you get the outline of the Cape vest.
Cutting and tailoring vest
To impose a pattern on the fold of the fabric and outline with chalk, make a seam (armhole to allow for the seam should not be, because the armhole is better to lie, if it is slightly increased).
Baste and stitch Darts, stitch the shoulders, and sew. Sew the lining, attach it to the top. Sew hooks or buttons.
In the treatment of neck and zipper front to put on the oblique striped slim cut thick fabric that will protect oblique cut from the extrusion.
VEST WITH POCKETS AND TAB AT THE BACK
In Fig. 401 depicts the vest with Welt pockets. Between the rear strap tucks sewn from double folded fabric in width 4 see
Optionally, the vest can be decorated with bake of shiny fabric. The same fabric handle and hinges.
The drawing pattern of the vest in Fig. 402 displayed in digital notation.
Cutting and sewing a vest similar to the vest in Fig. 400. The pockets are treated to the junction of the upper with lining, loop - too.
VEST WITH A ROUND TOE
Vest with a semicircular Cape (Fig. 403) differs from the preceding in its more free form and length. At the request of the Darts on the back can do.
Drawing patterns vest in digital notation shown in Fig. 404.
Cutting and sewing the vest also similar to cutting and sewing of the previous styles.