CHILDREN'S SHIRT WITH ROUND NECK. Fig. 20

Size 30
Measurements:
length of shirts . . . . . . . . . . . 40 cm
the circumference of the chest................. 30 cm
Take line plan 17 cm from the calculation of 1/4 the circumference of the chest plus 2 inches: bust 60: 4+2=17 see
Build the rectangle ABC with a size of 17 cm by 40 cm for 40 cm - the length of the product.
From point A down delay of 13 cm from the calculation of 1/4 the circumference of the chest minus 2 cm: chest circumference 60: 4 - 2=13 cm.
From point 13 to the right draw a horizontal line, indicated by her Breasts.
From point B to the left and down-delayed at 6.5 cm from the calculation of 1/8 the circumference of the chest minus 1 cm (a constant for all sizes): bust 60: 8 - 1=6.5 cm.
Smooth concave line of the hand-connect points to 6.5 and 6.5 and get the neck back. From a point 6,5 on the line BG drops 2 cm, attached to a concave line from the hands of the point 2 point 6,5 on the line plan and get the neckline of the front.
From a point 6,5 on the line of the left delay 3 cm and from point 3 down to 0.5. Point and 0.5 point to 6.5 on the line plan connected with a straight line and get the shoulder shirts. The straight dotted line is a point of 0.5 is connected to the point 13. Dotted line divide into three equal parts. From the top of the division to the right at a right angle lay off 1.5 cm from bottom 2 cm Concave line from the hand combine point to 0.5 point to 1.5 point 2 point 13 and the obtained cut-out openings.
From a point In the left dotted line 5 cm from a point 5 rises by 1 see Point 1 connected by straight line with point 13 and get the side shirts. Then the point 1 hand-free connecting line with the middle of the bottom of the product.

Cutting and tailoring

The middle of the front and back of shirts have a single line pattern, fold the material and are cut for a share thread. Sewn chemise lapped seam width 0.5 cm seam Neck and armholes with bias binding is processed there or inside-out, width bakey ready-made 1 - 1.5 cm

BRA. Fig. 21

Size 30
Measurements:
length to waist .......... 27 cm
the circumference of the chest........30 cm
neck circumference.......... 13,5 cm
shoulder length . . . . . . . .10 cm
Take line plan 35 cm from calculation 1/2 the circumference of the chest plus 5 cm: chest circumference 60: 2+ 5 = 35 cm.
Build the rectangle ABC with a size of 35 cm 27 cm 27 cm = length of the product.
Lines AB and VG fifty-fifty, the points of division being joined by a dotted line.
From point A down-delayed 15 cm from the calculation of 1/4 the circumference of the chest: the chest circumference 60: 4 = 15 cm.
From a point 15 conduct a dashed horizontal line to the line BG.
From point A to the right of the line plan delayed 4.5 cm is based 1/6 neck circumference: neck circumference 27: 6=4.5 cm
From point A down at the 1 cm point 1 connect hand-slightly concave line with point 4.5 and the resulting neckline backless bra.
From a point 4.5 is right on line plan-delayed from 11 cm calculate the length of the shoulder plus 1 cm (1 cm is in the nous on the landing shoulder, the shoulder smachivaetsya only on the back): arm length 10+1= 11 see
From point 11 are lowered to 3.5 cm (bevel shoulder backless), a 3.5-point connected by a straight line with point 4.5 and get the shoulder back. The distance from point 1 to point 15 on AB divide in half, and from the dividing point to the right draw a horizontal line 13 cm from the calculation of 1/5 of the circumference of the chest plus 1 cm: chest circumference of 60: 5+ 1 = 13 see
From point B to the left of the line plan delayed 4.5 cm is based 1/6 neck circumference: neck circumference 27: 6=4.5 cm
From point B down to 5.5 cm from calculate 1/6 of the circumference of the neck plus 1 cm: neck circumference 27: b+ 1 = 5.5 cm.
Point 4.5, and 5.5 connecting by hand a concave line and get the neckline of the front bodice.
From the point of 4.5 (from point B) to the left of the line plan delayed 10 cm (shoulder length), from a point 10 falls to 3 cm (bevel shoulder forehand), point 3 connected by a straight line with point 4.5 and get the shoulder of the front of the bra.
Line plan BG from a point 5.5 to the intersection with the dotted line 15 divide in half, and from the dividing point to the left hold the dotted horizontal line 13 cm from the calculation of 1/5 of the circumference of the chest plus 1 cm: chest circumference of 60: 5+ 1 = 13 see
When all the points are placed, by hand lead line from point 3 through point 13, the point of intersection of the dashed lines point 13 to the point of 3.5 and received armhole bra.
Before long bra backless 2 see on this point G drop a line 2 cm and point 2 connected by a straight line with the point of dividing line of VG.

Cutting and tailoring

To the back of the bra clasp is added to 4 - 5 cm.
The middle of the front of the bra has a fold of material and cut out the common thread. Cut out the bra expanded, twice, without side seams. Sewn bra lapped seam, the armhole and the neckline with bias binding handled there or inside-out Width bakey ready-made 1 - 1.5 cm Loop prometia. The bottom of the bra, you can sew your material (a binder width 2 - 3 cm) or treated with a belt which is specifically made for a share thread.

BRIEFS. Fig. 22

Size 30
Measurements:
knee-length . . . . . .30 cm
waist circumference........ 30 cm
the circumference of their hips....... 32 cm
Pant size is determined by waist circumference.
Take the plan line AB, equal to 18 cm, calculate 1/4 waist circumference plus 3 inches: waist circumference 60: 4+ 3 = 18 cm.
From the point B drop a vertical line 20 cm from calculation 1/2 length knee-length plus 5 cm: knee-length 30: 2+5=20 cm
From the point 20 to the left draw a horizontal line 20 cm from the calculation of 1/4 the circumference of the hips plus 4 inches: the circumference of their hips 64: 4+4 = 20 cm.
Point 20 is connected to point A. From point B on the straight line 20 down to hold vertical line 10 cm (standard for all sizes), from point 10 to the left - horizontal line 4 see Point 4 connect the dotted line with a point 20 on the line A. the Dashed line divide in half, and from the point of division up at a right angle lay off 1 cm Then a concave line from the hand connecting point 4 point 1 point 20 and get a cutout for my feet.
B continue up to 3 cm, point 3 connect a straight line with a point A and get the waistline panties back halves, which is higher than the front for 3 cm.

Cutting and tailoring

The right vertical line 10 B is the midpoint of the front and backside of cowards, has a fold of material and cut out the common thread.
Briefs are sewn lapped seam; the top panties for freezing gum is stitched in the same material, the width of the ACC 1 - 1,5 cm For strength along the fold of the material the top is made of machine stitching.
The cutout for the feet is sheathed piping there or inside-out, width bakey ready-made 1 - 1.5 cm.
Bake you can make as a finish, different color.

SUMMER ROMPER. Fig. 23

Size 30
Measurements:
the total length of the product ....... 56 cm
back length to waist....... 26 cm
knee-length................. 30 cm
neck circumference................ 13,5 cm
waist circumference ............. 30 cm
the circumference of the chest ............. 30 cm
the circumference of the armhole............ 27 cm
Take the plan line AB, equal to 17 cm, at the rate of 1/4 of the circumference of the chest plus 2 inches: bust 60: 4+2 = 17 see
From point B lay off the down up to the waist 26 cm and from point B - length 56 cm.
From the point 26 to the left draw a horizontal line 18 cm from calculate 1/4 waist circumference plus 3 inches: waist circumference 60: 4+ 3 = 18 cm.
Point 18 connected by a straight line with point A. From point A to the left draw a horizontal line 8 cm (sleeve length). From point 8 drop vertical line 13 cm from the calculation of 1/3 of the circumference of the armhole plus 3 cm: circumference armhole 27: 3+ 4 = 13 see
From point 13 to the right draw a horizontal line to the intersection with a vertical line and set the point B. to the Left of the dot In delay 2 cm, down 3 cm From a point 13 rises to 2 cm When all the points are placed, by hand a concave line from point 2 through point 2 to point 3, the point 18 of the plotted line side.
From a point 26 down-delayed 20 cm from calculation 1/2 length knee-length plus 5 cm: knee-length 30: 2+ 5 = 20 cm
From the point 20 to the left draw a horizontal line 23 cm from calculate 1/4 waist circumference plus 8 cm: waist circumference 60: 4+ 8 = 23, see
Point 23 connected by a straight line with point 18.
From the point 56 to the left are line of 4 cm and a point 4 connected by the dashed line with the point 23. The line of dashes divide in half, and from the point of division up at a right angle lay off 1 cm Then a concave line from the hand connecting point 23 through the point 1 with point 4 and get a cutout for my feet.
From a point 56 rises vertically 3 cm and point 3 connect hand-curved line with dot 4.
From point B to the left of the line plan and down-delayed at 5.5 cm from calculate 1/6 of the circumference of the neck plus 1 cm: neck circumference 27: b+ 1 = 5.5 cm.
Point of 5.5 and 5.5 connecting concave line and get the neckline of the front.
From point B down to 1 cm, point 1 connecting concave line with point 5.5 of the plan and get the neck back.

Cutting and tailoring

The front and back halves of the jumpsuit is all cut on one pattern. First, cut out front, then the pattern is cut on the waist line. Cut out the upper back, then the pattern of cowards rises to 3 cm in the middle of the backside and cut the back halves of pants. To the waist line of the panties ass stitched belt, which is hidden twice, the common thread is based 1/2 waist circumference. Belt width 5 cm Belt face is applied to the underside of the panties, sewed, bent in half, covered them with seam, belt podgibayutsya and we used the edge face of the belt.Belt primetnye doing vertical loops.
Jumpsuit is sewn or reverse lapped seam. The neckline can be any shape and is processed at the request podkralas or piping. When you cut under the neck in the middle of the back is cut open and processed plank No. 1 (Fig. 156). The line is prorezka sides of length 10 cm and processed by plate No. 2 (Fig. 157).

JUMPSUIT WITH CAP SLEEVES FOR CHILDREN FROM THREE TO FIVE YEARS. Fig. 24

Size 30
Measurements:
the total length of the product......... 80 cm
back length to waist ...... 26 cm
the length of the pants on the side....... 54 cm
shoulder length . . . . . . . . . . . 10 cm
sleeve length . . . . . . . . . . 30 cm
the circumference of the chest.............. 30 cm
neck circumference................. 13,5 cm
the circumference of their hips.............. 32 cm

Take line plan 21 cm based 1/4 thigh circumference plus 5 cm: the circumference of their hips 64: 4+ 5 = 21 see
Build the rectangle ABC with a size of 21 cm on 80 cm, 80 cm - length of the product.
From point A vertically lowered to 26 cm (length to waist), from point 26 to the right draw a horizontal line to the intersection with the line BG and put the point T. From the point 26 vertically lowered to 21 cm from the calculation of the 1/4 thigh circumference plus 5 cm: the circumference of their hips 64:4+5 =21 see
From the point 21 to the right draw a horizontal line step to the intersection with the line BG and denote its point W. From point 21 to the vertical rise by 7 cm from the calculation of 1/8 the circumference of the hips minus 1 cm circumference of hips 64: 8 - 1 =7 cm.
From the point 21 to the left about~drive a horizontal line 8 cm from the calculation of 1/4 the circumference of the hips: the circumference of their hips 64: 8 =8 cm.
Point 7 and point 8 from the hands free connecting concave line. Point 8 connected straight dotted line with a point In a line of dashes divide in half, from the dividing point to the right at a right angle delay 1 see the Concave line from the hand connecting point 8 through point 1 with point B.
From point A to the right of the line plan delayed 5 cm calculate 1/6 of the circumference of the neck plus 0.5 cm: neck circumference 27: 6+ 0,5 = 5 cm.
From point 5 draw a horizontal line (B) 40 cm from a calculation of the length of the shoulder 10 cm plus 30 cm-sleeve length.
From a point 40 at a right angle drop a vertical line 15 cm from the calculation of 1/4 the circumference of the chest: the chest circumference 60: 4=15 cm.
From point 15 to the left at a right angle draw a horizontal line to the intersection with the line BG and put the point P.
From point A on a vertical drop of 6 cm from a calculation of 1/6 neck circumference plus 1.5 cm: neck circumference 27: 6 + 1,5 = 6 cm.
Point 6 and point 5 of the connected hand-free line and get the neckline of the front.
From point A on a vertical drop of 1.5 cm (for all sizes), point 1,5 of the connected hand-free from 5 and get the neck back. From the point to the left of 1.5 and the point 7 to the left draw a horizontal line 2 cm (to clasp in the middle of the back) and 2 points top and bottom connected by a straight line.
From the point T to the left waist-delayed 2 cm From point P to the right horizontally and down vertically postpone 2 cm Concave line, hands joined point 2 point 2 point 2 point W and get the side of the jumpsuit.

Cutting and tailoring

Cut out jumpsuit in the same pattern, with the exception of the neckline backless. The bottom of the trousers and sleeves can be done on the cuff or an elastic band. Collars for overalls are made of various styles. If desired, the clasp can be in the middle of the front.
Coveralls can be lined.