After the cutting of the decks and getting packs of parts they need to complete. To do this, select one set of product details upper, lining and butt. During Assembly of the cut bundles of small parts fasten with thread passed through the parts, medium and large parts bind. Unpaired parts of the product are cut when cutting the "face" for the two packets, placing them into two piles.

In the mass production of parts treated in different sections. Not to interchange parts when assembling them with the appropriate serial number of the product, and all the details of the uppers and lining sew the corresponding ticket in a special machine. 

All symmetrical part sew coupons for both parts. When the stripe passes must be correctly positioned on all the details to the card were not in the seams joining parts or under finishing lines. On the parts of the butt, lining, linen rooms write with chalk or pencil.

Cut checks before completing the controller. Then all parts of the product are linked into a single packet and sent to a Central warehouse cut with appropriate documentation.

Cut complete laid out on the shelves (the shelves) on products, styles, ordinal route sheet. The dimensions of the shelving we recommend the following (in one layer): for suit 1,0X0,8X1,0 m; for the coat - 1,35Х0,8X1,0 m; for easy dress - 0,65Х0,65Х0,65 m; it is advisable to make 2 - 3 layers. Cut sent to sewing workshops at the direction of the plug-in Manager centrally forwarders in the cutting room, strictly observing the sequence number of a route sheet. 

For the transportation of cut it is recommended to use three-wheeled design container TSNIISHP.