Pockets located in the joints of the shelves, used in products, shelves which make up most of the two longitudinal parts. Part of the shelves at the locations of the pockets do not connect the edges, and holes formed are treated in some way (leaves, obrazkami, hem details, etc.).
Pocketing with leaves (Fig. 35) comprises processing the leaf and the Assembly of pockets.
Processing of the leaf described here.
Assembly pockets perform the following way. Leaves pritachivajut to the front (or upper) parts of the shelves at ndsatcom or markup. At the same time pritachivajut one part of the burlap seam with a width of 1 cm
In the female products with Hessian lining of the tissues in participarii the edge of the burlap bends 1 cm and scribbled on the distance 0.1 - 0.2 cm from the bent edge.
To the side (or bottom) portions of the shelves pritachivajut the second part of the burlap seam with a width of 0.7 cm and Then connect the shelves, and then grind off the burlap, after removing it towards the inside of the shelves, a seam width of 1 cm.
In the women's products with lining, not pricechannel to the bottom of the garment, the seam of the burlap, cut from silk lining fabric, overcast on a special machine.
The ends of the pockets and leaves reinforce the hand stitches. As pockets of dolevikov treated without fixation of the ends of the leaf from bottom to enclose the pieces of calico or calico. Pockets priorivet.
For the machining of pockets without the piece of paper at the entrance line to the pocket from the main part lay a strip of fabric with an adhesive coating width 3 to 4 cm
|