Currently, most clothing companies have mastered the system defect-free manufacturing. In the transition to this system work each company selects a distribution (leading) operation for each type of product.
To the installation operations include operations such from the performance of which depends on the machining quality, balance and appearance products. In addition to the quality execution of the installation operations (including quality assurance) employed for this operation must verify the processing quality of the previous operations, paying attention the quality of the lines, width and roveto seams, correctness of form and the location of the individual parts, proper operation fasteners, mounting main parts the fit on the mannequin. 

  Treatment of the neck. Check quality perform the following operations:
-processing of Darts located at the back of the PA (particularly the quality of stitching and wet-heat processing); 
-the symmetry the location of the Darts and shoulder seams, which are folded back along in the middle, equalizing the edges at neckline and shoulder seams; 
-treatment of the shoulder sections (particularly the quality of stitching and wet-heat processing); 
-processing tucks on the shelves or the front of the bodice with front and back sides products (especially the quality of the lines and the wet-heat processing);
-symmetry the location of the Darts on the (shelves are placed on the table, equating on the Board, the neck, side and shoulder seams, armhole); 
-visual inspection check the correct allocation of assemblies on the back, shelves and before, if provided in the design; 
-external inspection inspect the processing quality of the reliefs on the shelves or front and on the back; 
-the symmetry of the arrangement of the reliefs: 
a) on the shelves (the shelves are stacked one on the other and equalize on the side, neckline, shoulder seams);
b) on the back or the bodice (the bodice back or fold double and equalize at neckline, shoulder seams, armhole); 
-primaqiune or nastraivanie yoke on the bodice (quality of lines, distance from lines to the edge of the shoulder in the overhead and nastrojkah the yoke); 
-the symmetry of the yoke (the yoke is folded in the middle or impose on one another);
-manufacture oblachnykh loops the correct location in relation to the Board, the distance between the loops, length of loops; 
-with a ruler or by visual inspection to check the width of the edging loops;
-processing of the pockets at the bodice (quality of line, distance from line to edge of part, rowdata region); 
-the symmetry of the pocket (the pocket fold in the middle); 
-the symmetry or the proper placement of the pockets, machining of valves, leaf, the clamping at the ends,the width and length of the framework. 

  Processing of the clasp to the bottom of the part. Check quality perform the following operations: 
-correctness processing boards podborany or obrazkami, quality stitching, correct side, roveto Kant on the width and quality of wet-heat processing;
-the parallel ledges and sides in blouses, jackets, the length of the sides, folding the left shelf on the right and combining the side, benches and neck. 

  Treatment short zipper two straps. Check correctness of felling strips, the quality of the lines,distance from lines to the edges of the strap, matching the dimensions of the upper strap report card measures the quality of the wet-heat treatment.

  Processing of zipper. Check quality perform the following operations: 
-primaqiune zipper (rowdata edges and parallel to felling - with a ruler at the beginning and end of the zipper);
-processing collar (as the straightening of a collar, the quality of wet-heat processing rowdata Kant and decorative stitches width (with line); 
-the symmetry of the ends and fly collar (collar fold in half or, if the collar consists of two parts, imposeone part to another); 
-in several places, check the width of obcutek of the neck with a ruler or putting one piece of piping to another and the configuration of the cutout at neckline products and otacek, applying piping on the front side of the product and equating sections;
-setting a collar or turning of the neck by obrazkami (seam width and stitch quality); 
-the symmetry the location of the shoulder seams line vrachevanie collar (shelves fold, right sides inside, equating the edges of the sides, the ends collar, neck). 

  Treatment arm openings. Check quality perform the following operations: 
-execute decorative stitches on the cuffs; 
-the symmetry of the cuffs (the cuffs right and left sleeves folded together); 
-processing of tucks on the sleeves (the quality of stitching, wet-heat processing); 
-implementation of Darts on the right and left sleeves (length);
-perform decorative stitches on the sleeves; 
-production of bags (under the control marks on the sleeve and the armhole, cacistocracy, the width of the seams, the fit of the sleeves); 
- several places to check the width of obcutek armholes (with a ruler or applying one piece of piping to another); to check the quality of stitching and the width of the seam primaqiune of obrazek. 

  The connection of the bodice to the skirt. Check the following operations:
-distribution assemblies, folds at the waist on the bodice, the skirt, 
the symmetry of the arrangement of the creases, gathers on the bodice (the back and the forepart of the bodice put together);
-processing of the Darts on the skirt (quality stitching, wet-heat processing); 
-processing of the seams between the parts of the skirt (quality stitching, wet-heat treatment); 
-the symmetry the location of Darts, gathers, pleats, seams between the parts (front and rear panels of the skirt are folded in the middle); 
-processing pockets located on the skirt (quality of lines, distance of lines to the edge of the part, rowdata edge, width and length of the framework, correct fastening pockets at the ends); 
-the symmetry of pockets, flaps (pockets stacked with one another); 
-the location of pockets, valve line;
-primaqiune the bodice to the skirt (the quality of stitching and the width of the seam). 

  Wet-heat processing. Check the quality of the serging loops, vrachevanie zipper in side seam, handle bottom (rowdata bottom and stitch quality podseleniya); the length of the side seams. 
After the wet-heat treatment should not be Las, seminov.