The design of the pockets. Pockets on the front sides of the pants can be varied (Fig. 247).
 

When performing the pocket in the frame (Fig. 247 a) appropriate frame width 1 cm frame length or the entrance to the pocket 16 cm Distance from the upper edge 3 cm from side seam - 3 cm Side pocket with Podkayne sideways (Fig, 247 b; Fig. 29 in the color inset) is most common and will never go out of style. The length of the pocket from the upper edge of the trousers to the side seam 19 cm From the upper side of the right - 5 - 7 see This pocket may be performed in combination with finishing (decorative) valve, which is inserted into the upper edge of primaqiune the Trouser waistband (Fig. 247 6).The middle of the valve coincides with the fold line of the trousers. Valve length - 8 cm - 10 cm Width of the valve in the middle is 5 cm, side sections - 3 cm Valve can be performed with a loop in the middle.
 

 Pocket shaped Podkayne sideways (Fig. 247) is most often used in denim pants. The front end of the pocket spaced from the line of fold 1 cm from the top, side point down the side seam - 8 - 9 see the Upper section of a small stash pocket located from the upper edge of the trousers at a distance of 4 cm pocket Width - 8cm, depth - 9 cm

  Pocket with Podkayne sideways from the front end Darts to the side seam (Fig. 247 g). From the top side of the down distance is 8 cm tuck - 5 cm

  Pocket with leaves (Fig. 247 d) is located at a distance of 5 cm from the upper edge of the trousers. The length of the leaves (the pocket) - 14 cm Width of the leaves 1 - 1.5 cm To the leaf of the button is fastened the belt loops, which is sewn into the upper section of the belt. Width belt loops - 2 cm, bottom - 3 cm, at the end of the loop the loop is processed in accordance with the diameter of the buttons.

  Curly invoice pocket (Fig. 247 e; Fig. 37 in the color inset). The front part of the pocket goes into the belt loops at the waist. Line the pocket extends from the fold to the side seam. The distance from the upper point of the side seam 1 cm Width belt loops at the waistband can be 1 - 1,5 cm Length SMD front pocket from the upper edge equal to 22 cm Front cut parallel to the fold line. The lower part of the pocket comes up to the side seam. Small pocket with Podkayne sideways building similar to the pocket in Fig. 247 V.
 

  The pocket in the frame is inclined (Fig. 247 g). Appropriate frame width 1 cm, length 15 cm Distance from the upper edge to the pocket at the line sabturce trousers 5 - b cm, from the upper side of the down side of the cut 11 cm

  Pocket with Podkayne sideways and the ledge (Fig. 247 h). The length of the pocket from the tuck end to the side cut - 12 - 13 cm, length of the ledge to the side of slice - 5 - 6 see

  the Pockets with a cutting sideways and two benches (Fig. 247). The distance from the top slice down on the fold line - 4 cm, from the upper side of the down side slice - 10 cm horizontal Length of the ledge - 2 cm Length of the vertical ledge - 2,5 cm

  Pocket slip (Fig. 247). From the top slice down on the fold line - 4 cm, from the upper side of the down side slice - 8 - 9 cm Width of strap - 2 cm Length front 17cm, side - 13 cm Width inverted pleats - 2 cm

  Pocket with Podkayne sideways and the valve in the seam protecive belt (Fig. 247 l). Podkralas the flank located to the right of the bend line at a distance of 1 - 1.5 cm and down vertically, to 4 cm From the upper side of the down side slice - 7 - 8 cm Length of the rear ledge - 1 see the Front end of the valve is from the line of the bend to the left at a distance of 1.5 cm Length of the valve through the upper cut - 11 - 12 see valve Width, front - 3 cm, width of side - b see

  Side pocket with Podkayne sideways (Fig. 247 m). The front end is from the bend line at a distance of 3 cm Distance from the top side of the down side slice - 11 - 12 see

  a patch pocket with flap located at a distance of 3 cm from the upper edge, the bend line is 3 cm pocket Depth 11 cm valve Width - 3 - 3,5 cm
 

  The slip pocket on the rear half of the pants (Fig. 248, Fig. 34 in the color inset). Located at a distance of 6 - 7 cm from upper edge, side-cut - 4 cm pocket Width at the top, 16 cm bottom 17 cm; depth - 18 cm Width of the valve in the middle is 7 cm, the side is 6 cm

  patch pocket on the back mate with a detachable yoke (Fig. 248 b). The distance from the top mid point to the left of the line of cut 4.5 cm, down, vertical 3 cm From the upper side of the right line trim - 10 cm, bottom vertically -5 cm Depth of the pocket in the middle 18 cm of the sides 16 cm. strap Width - 3.5 cm Width of decorative strap is 2 cm

  slip Pocket double (Fig. 248). The bottom pocket is situated at a distance of 6 - 7 cm from upper edge. From tuck end lay the width of the upper edge of the pocket equally on both sides. The width of the upper pocket in the upper part - 15.5 cm, bottom 16,5 cm Width of the valve front 4 cm, back 6.5 cm

  Pocket with flap on the line of primaqiune yoke (Fig. 248 g ; Fig. 33, 38 in the color inset). The valve is located from the top side points to the right at a distance of 6.5 cm valve Length - 14.5 cm, width in the middle is 5.5 cm, front and back - 4 cm