Wet-heat treatment is performed on the shelves of the press with special pillows with convex upper or lower surface. The right and left ledges are molded at the same time, folding them right sides. Shelves placed on the bottom cushion presses, combine the centers of the bumps cushions and shelves, the line side parallel to a front edge of the cushion of the press; distributing the slack tissue in the area of lapels, neckline and arm openings, shelves evenly moistened and compressed.

In the absence of the presses with the special pillows, the edges of the shelves sativum iron to side (versatile) Shoe. In this case, the shelves fold right sides together and stack on the pad so that the line of inflection lapel are parallel to the ground pads, and the top shoulder of the cut and the point of intersection of the cut sides to the waist were on the oval edge of the pads. On the lapel forms a slack of the fabric, which staiway to full shrinkage, starting from the center of the chest towards the cut of the lapel (Fig. 25, a). Then shelves are placed cut side along the base pad (Fig.25, b), the Board is moistened and formed it slack sativum. If the jacket is made of a fabric with a pattern, the Board sometimes pulled and strips or cells straighten so that their lines are parallel to the cut side. After the shelves stacked cut neckline and shoulder sections to the operating, positioning the centre of convexity of the breast on the oval edge of the pads. The cloth is moistened, and formed slack sativum (Fig. 25).Next, the shelves turn to a working arm so that the center of convexity of the breast was on the oval edge of the pads, and the upper shelves were located in the plane of the pads. The fabric on the area of the openings is moistened, and formed slack staiway to complete alignment of the tissue (Fig. 25, g).

Then turn over the folded shelves (bottom shelf upwards) and all methods of processing are repeated. 

The quality of the execution the wet-heat treatment depends on the correct education of the form of coat on various sections of shelves. The value of stivania in each individual case depends on the cut of the jacket and is designed in the development process of its design.

To verify the wet-heat treatment of the shelves in the chest they put a running Board to bend along the line of prosanos so that the cut side was placed to the side of the openings. If wet-heat treatment is performed correctly, line polutanata will be straight and the bottom corner of the shelves to coincide with the cutoff bottom.

To protect the slices from stretching and maintain the shape and dimensions of the constructive lines armhole shelves are laid with a slight tension of the adhesive or pritachivajut on sanding machine nechaevu edge. The location of the edge, its width, the tension or fit of the fabric is installed in accordance with design requirements specified in the technical description of the model. So, the edge of the fabric with one-side adhesive-coated pave iron to a distance of 0.2 - 0.3 cm from the edge. On sanding machine edge pritachivajut at a distance of 0.2 cm from the outer edge of the edge.In manual mode, edge sewn to the outer edge of the slant blind stitch with a length of 0.6 - 0.7 cm, making every 5 - 6 cm fastening blind cross stitches.

Jackets from fabrics containing synthetic fibers, across the shoulder paving .slanting stripe cotton cloth, equating it to external slice with cut armhole and pritachivajut at a distance of 0.5 cm from the cut edge of the armhole.