Friday, 29.03.2024, 08:15
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » Women's and children's dress

Suits for sports

COSTUMES FOR SPORTS

HAREM pants

For the construction of the pattern of the trousers (Fig. 302) for children 11 - 12 years taken the following measurements in inches:
Semicircle waist ........... 34
"hip . . . . . .38
The length of the trousers on the side........... 7

Construction drawing patterns

 The front half of the trousers. Draw a rectangle АНА1Н1 (Fig. 303, a). Vertical sides equal to the measure length of trousers: an=А1Н1=75cm.
The horizontal side is equal to 1/2 of the semicircle hips plus 7 cm.: AA1 = НН1 = 38 : 2 + 7 = 26, see
 Line width of the step. From point A to defer down 1/2 of the semicircle thighs plus 4 cm and place the point of W: AL = 38 : 2 + 4 = 23 cm
From point W to hold right horizontal line and at the intersection with the vertical to put the point SH1.
 Line the front seam. From point A1 to postpone the left 3 cm and put the point T. From this point to hold down the vertical line and the line crossing the width of the step to put the point B. From point B to wait for this line-up 4 see Point 4 and SH1 to connect a smooth line.
 The bottom line is. Horizontal line НН1 split in half and the points of division to defer to the left and to the right through 9 cm; to put the points N2 and N3. To connect these points by straight lines, points, sh and SH1. From the dividing point on the line НН1 to hold up the vertical line. Along this line, the pattern on the fabric have a common thread.
 Back half of trousers. Draw a rectangle АНА1Н1 (Fig. 303, b).
The vertical and horizontal sides of the rectangle and the line width of the step is determined in the same way as for the front halves of trousers.
 The waist line. Line НН1 split in half. From the dividing point to hold up the vertical line, continuing it over the line AA1 2 cm and put the point T1. From point A1 to continue a horizontal line of arbitrary length. From the point T1 to the intersection with the continued horizontal line draw a line equal to 1/2 of the semicircle plus the waist 3 cm, and put the point T2. From the point of T1, continue straight Т1Т2 5 cm and put an end T3: Т2Т3 = 34:2+3+5 = 25 see
 the Extension on the line of the step. From point W to be postponed to the left 1 cm and 1/5 of the semicircle of the thighs and put the points B and B1: BB1 = 38: 5 = 7,6 see
 the bottom Line. On line НН1 from the points of division to be postponed left and right 11 cm and to dot N4, N5. Points H4 and B1 connecting a straight line and delay on it (from the point H4) segment equal to Н3Ш1 (see Fig. 303, a), and to put an end B2. Point N5 and T2 connect by a straight line (see Fig. 303, b).
 Line the back seam. From point W to be postponed up to 1 cm draw a line back seam, connecting the point B2, B, 1 and T3 smooth line, as shown in the drawing.
 Line the pockets of the valve. Outline the line of the pocket and valve at the points shown in the drawing.

Preparing patterns, cutting and sewing

To prepare the pattern of the pocket and valve. The fabric is doubled by a transverse filament and put the pattern of the front and rear halves of the trousers so that the auxiliary lines drawn from the points of division, is located a common thread.
To pristroit pocket and the flap to the back half of trousers. Seams sew the lapped seam. The top and bottom (waist) trousers to sew the width of the bands.

DRESS FOR SUMMER SPORTS

Short dress (Fig. 304) for the summer sports of tennis, with undercuts at the sides below the waist. The skirt from undercuts inherent unilateral folds. Turn-down collar, stitched, buttoned. The bodice is trimmed on the right two Welt pockets.
The fabric is light tight cotton.

Lines cut and prepare patterns

To prepare a main pattern semi-fitted dress (see Fig. 82).
For this pattern to apply a line style.
 Back. To build cap sleeves shoulder line extend to the right by 4 cm (Fig. 305, a). From point 4 to delay down 2 see Point 2 to connect a smooth line with the armhole and shoulder line.
From the waist line in the middle of the back to postpone the length of the dress 35 cm, and 35 from the point, draw a horizontal line to the line side.
Put on the waist line side down 4 cm on the left side tuck - 8 see Point 4 and 8 connect with a straight line and divide it in half. Draw a vertical line to the bottom of the dress: from the point of division and from the tuck end. To clarify the line side to lay waist to the left 1 cm Point 1 and G2 to connect a straight line. Then from point 1 through point 4 draw a straight line with a length of 35 cm Point 35 to connect the straight line with the bottom of the dress.
 Before. To build the sleeve, line the sides and podreza the same as on the back.
Line podraza (Fig. 305, b) divided into three equal parts. From the points of division and the end tucks on the waist line draw a vertical line to the bottom of the dress. From point B2 to defer to the right 4 see the line of the circumference of the chest and the bottom of the dress extend to the right by 2 cm to Connect the dots of the 2 straight line and the upper point 2 and point 4 - a smooth line. The end chest Darts connect with the tuck at the waist line.
To build a collar to hold from the point B1 to the right of the horizontal line length of 13 cm and a vertical length up to 8 cm From the point 8 to the left to defer 3 see Point 3 and B1 to connect an auxiliary line to divide it in half and to defer the right of 0.5 cm to Hold the line terminations of the collar to sprout through the points 3; 0,5; V1.
From point 3 perpendicular to line Rostock to draw a straight line with a length of 8 see Point 8 and 13 to connect with a straight line and extend it down to 4, see Points 4 and B2 to connect a straight line.
Outline four loops and podbot, as shown in Fig. 305 b.
 Training patterns. The pattern to be cut by the plotted lines and undercuts. Pin tuck close to the line of translation of the tuck. Cut the extra part of the pattern. Collar and podbora to make a copy on tracing paper. Prepare two piping to the sleeves. To number parts.

Layout and cutting

Fold the fabric in half with the fold at the common thread (Fig. 306). All pattern pieces spread out, as shown in the drawing. The parts # 1 and # 4 to make braces for the Darts and add 3 cm (1/2 the depth of the folds). To detail № 2, № 3, № 5, № 6 and No. 7 to allow for the folds 3 or 6 cm (see Fig. 306), and due to the depth of the folds to make braces.
To outline the bodice of the location of the pockets. From the highest point of the neck and through the closed tuck to delay down 15 see Both points 15 connecting a straight line and continue it to the left by 5 cm (the length of the pocket 9 cm) to Identify the second pocket, placing it below and to the left of the first 2 cm.
To find all the details of the dress.

Tailoring

Sweep and press folds along the diagonals. To pritchet skirt for the undercuts on the reverse side. Sew Darts, press them to the middle of the back and front. To handle pockets with decorative fabric or the main fabric to embroider the border of the pocket with embroidery floss. To vitacare loop.
Sew shoulder and side sections and resuturing. To pritchet podbot, collar and handle, the bottom of sleeves. To sew and to iron dress.

BEACH SUIT

Beach costume (Fig. 307) consists of a leotard (long shirt and pants) and a wide skirt. Blouse (Fig. 308) sleeveless with square neckline straps. The skirt is made of six wedges on the belt with large patch pockets also trimmed straps. The fabric is cotton printed.

Lines cut and prepare patterns blouse

To prepare the adjacent main pattern of the dress (see Fig. 97).

 Back. From Rostock on the shoulder line to postpone BSM (Fig. 309, a). To defer from the middle of the back waist 6 cm and build a dart. B (top) to connect with left side tuck. In this line, to be postponed downwards 11 cm and put a stamp. From point 11 to draw a horizontal line to the middle of the back and put on the lines the strap width 3.5 cm From the waist line down to defer 33 cm - length of blouse. From the middle of the Darts draw a vertical line to the hem of her blouse.
 Before. From the neck down the middle of the front to postpone down 7 cm (Fig. 309, b), and from point 7 to 3.5 cm From the points 7 and 3.5 hold left horizontal parallel line to the intersection with the right side tucks, and against the top line on the left side of the tuck to put a stamp. To build mysyk strap and outline loop, as shown in Fig. 309 b. To transfer the Darts from the armhole through the Boca to postpone 4 cm, point 4 to connect with the end of a chest tuck. From waist line to delay the blouse length - 33 cm
To defer at the waist from center front 7 cm, point 7 connect a straight line from the end chest Darts and build the first tuck. (The second dart to leave, as the drawing of the basic pattern.) From the middle of the first tuck to the bottom of the blouse to make a vertical line.
 The training patterns. The pattern cut on the lines style. Cut Darts at the waist. Breast tuck to close and translate it along the line of translation of the tuck. Cut off the excess part of the pattern and number of items. Strap to make a copy on tracing paper.

Construction drawing panties

To compose a drawing panties removed following measurements in inches:
Seat height ............. 32
The semicircle of the hips .. 52
 Construction drawing of the front halves of pant. Draw the rectangle ABC (Fig. 310).
Vertical sides of a rectangle is 38 cm (measurement of the length of the seat plus 6 cm for all sizes): AB = BG = 32 + 6 = 38, see 
The horizontal side of the rectangle is 28 cm (semicircle hip plus 2cm for loose fit): AB = VG = 26 + 2 = 28 cm.
From point A to postpone downwards 18 cm, from point 18 to 6 cm From point 18 to draw a horizontal line to the intersection with the vertical.
From point A to defer to the right 2 see Points 2 and 18 to connect with a straight line, continuing it up to 2 see This line split in half and the points of division to postpone 1 cm left to Hold the line of the side seam by connecting the points 2, 1, 18 smooth line and the points 18 and 6 straight.
The distance from point 2 (line AB) to B divided into three equal parts.
To hold waist line, a smooth line connecting the upper point 2, the right breaking point and the point B.
From point G to defer to the left 5 see Point 5 and 6 connect auxiliary straight line. This line divide into three equal parts. From the right point of division a perpendicular is erected with a length of 6 cm, left 4 cm draw a line from the bottom of the pant through the points 6, 4, 6 and 5.
 Construction drawing of the rear halves of a pant. Extend a vertical line GB up 3 cm to Hold the line of the waist from point 3 to the upper point 2 in a straight line.
Auxiliary line connecting the points 5 and 6, divide in half and from the point of division a perpendicular is erected with a length of 3 cm.
To hold the bottom line of the rear halves of the panties through points 6, 3 and 5.

Lines cut and prepare the pattern of the skirt

To prepare the skirt pattern "bell" (see Fig. 78).
To continue the line of the middle of the front and rear panels of the skirt until they intersect and put a dot On (Fig. 311).
Waist from the middle of the back of the cloth to defer b cm, from center front cloth - 7 cm Distance between points 6 and 7 split in half.
From the point O to the line of the bottom of the skirt to hold straight lines through points 6, 7 and the point of division.
From the point of division and from point 7 at the drawn lines to defer down to 11 cm - distance from the pocket; from point 11 to a delay down the length of the pocket 21 cm and the strap width is 3.5 cm Connect the two points 21, two points 3.5 and two points 11 smooth lines.
In the middle of the strap to outline mysyk a length of 2 cm, as shown in Fig. 311.
The skirt pattern cut on the plotted line style from the waist to the hem, number detail. Patterns of pocket and strap to make a copy on tracing paper.

Layout and cutting

The fabric is doubled at the common thread. Put pattern pieces suit blouse and pants, as shown in Fig. 312, pattern pieces of the skirt, as shown in Fig. 313.

Tailoring

Preparations for the fitting and fitting is presented on pp. 258 - 265.
 Blouse. Sew the shirt along the lines of the style. Handle straps and sew them to the neckline. Sew shoulder and side sections, to sew the remaining tuck at the waist line. Hem bottom of blouse.
 Briefs. Sew the side sections of the double seam. The bottom pant hem slanting welts. Process waist line to support gum.
 Skirt. Sew the wedges bridging the seam. To handle pockets top straps. To pristroit pockets to the skirt. Sew waistband to the waistline. Hem the bottom. To iron.



Category: Women's and children's dress | Added by: 20.10.2017
Views: 1623 | Rating: 0.0/0

Total comments: 0
avatar