Friday, 29.03.2024, 18:01
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » A hundred styles of women's dresses

Asymmetric dress with a shawl collar and drape on the right shelf

Feature 42 (see color figure on the right) 

Dress in printed silk or thin cotton fabric (sizes 46 - 56). The bodice with a long waist. On the right shelf drape, ending with a strap attached to the bodice with buttons. The full skirt of three wedges, slightly gathered at the waist. Sleeve one-piece, short. Collar - sew a season. Dresses of thin fabrics skirt can be prioraty more (optional). 

This dress is especially good for women with short waist. Women with a long waisted bodice is better to cut off at the waist.

Drawing style lines on the pattern (Fig. 158) 

the Style developed by the pattern drawing tselnokrajnimi bodice with short sleeve.

 3аднее panel (Fig. 158, a). To deepen and expand the neck of the sprout cut at the shoulder and mid-back 5 - 6 cm (optional). For extra-long waist on the side to cut down delay 8 - 10 cm (optional) and draw a line to the intersection with the middle of the back. Divide this line into three parts and from the points of division draw a line to the bottom. 

 The front panel (Fig. 158, b). For extra-long waist on the side to cut down delay 8 - 10 cm, and in the middle of the front 10 - 12 cm, to connect points parallel to the waist line. At the shoulder slice from the top of the neck to postpone 5 - 6 cm (optional) and the depth of the neck down the 12 13 see Point 5 - 6 and 12 - 13 is connected by a straight line, divide it in half and down at right angles to a line drawn to defer 1.5 cm From the depth of the neck, i.e. from the point 12 or 13, to postpone the right for entry of a fastener 10 cm and from point 10 down 5 - 6 cm.Draw the neckline, connect the dots 5 - 6, 1,5, 12 - 13 and 5 - 6 smooth line. Point 5 - 6 to hold a line parallel to the middle of the front, to the intersection with the line of the bottom of the bodice.

To obtain the draping on the right shelf to put the line of travel of the side tuck from the setting of the fastener, i.e., from point 5 to 6 down to postpone 3 cm, and received a point to connect with the end of the side tuck. To increase the drape, to cause the line cut from sunset clasp to tackel tuck on the right shelf. At the extended waist of time left to postpone a strap width of 4 cm and draw a line parallel to the middle front to neck. 

On the left shelf to build the neck and the length of the shelves in the same way as for the right (dotted line).

The line extended waist and hem split into three parts and obtained the point connect. 

 Collar (Fig. 158,) construct on the basis of the patterns of the back and shelves, aligning the shoulder seams. The width of the collar down the middle back and the shoulder cut must be equal to 8, see the line of the neck from the top to the setting of the shelves split in half and the dividing point delay down to 7 cm to Make unfastened portion of the collar, as shown in Fig. 158, V. 

pattern pieces are numbered and show the direction of the grain lines.
 


Obtaining the modified pattern and cutting (Fig. 159) 

caused to the lines On the pattern to cut. 

 Back be cut out of the pattern, marking the middle of it to bend the fabric of common thread. 

 The rear panel of the skirt (Fig. 159, a). The cut part of the pattern to lay out the entire width of the fabric with the distance between them (top cut) 8 - 12 cm (depending on fabric width). From the waist line along the side cut of the fabric is not cut. To carve out two parts. 

 Right shelf (Fig. 159, b). Make a cut from the line of approach to the end of the side tuck, not dorezaya 0.5 cm Closed, whereby opening of the new tuck for draping. For applying lines from the line entering the pattern to cut and push of her at a distance from each other at 3 - 4 cm, closing the traveling tuck. Not to make narrower the shelf the thighs, needs to expand its bottom line from sunset as long as the pattern comes down at the closing of tackle Darts (shown in phantom). Pattern to put to the equity thread on the fabric coincides with the direction of the grain lines on the pattern.To carve out one detail.

 Left shelf (Fig. 159,). Be cut out of the pattern at a time with each one detail so that the middle shelf was the common thread. 

 Strap (Fig. 159, d). To find on the pattern common thread one detail twice as wide as the pattern. 

 The front panel of the skirt. To carve out a prepared pattern one detail in the same way as for the rear panel. 

 Collar (item 7). To carve out two parts. The upper collar finishing the main fabric, and the lower by the upper 0.3 cm put the Pattern so that the middle of the collar formed by the fold of the fabric on equity or cross thread.

The seam and stocks is shown in Fig. 159.
 


Tailoring 

1. Note the middle left and right shelves and collar cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. To obtain the draping on the right shelf, departing from the edge 1 cm, stitch rare stitch, then 1 cm to lay a second line. To assemble the Assembly, the length of the middle shelf, i.e., at 25 cm. 

4. Baste and sew the side and the traveling block tuck on the left shelf, priotity side down, and traveling to the middle of the front.

5. Fold the upper and lower collar facing inside, baste, and sew on the unfastened part of the seam width 0.7 cm, remove the collar on the front side, releasing the roll from the top of the collar 0.1 - 0.2 cm, sweeping up and priotity. 

6. Baste and sew the shoulder and side seams shelves and back, process them on the wrong side. Tack and pritchet collar to the neckline with bias facing.

7. To attach the strap face to the right side of the shelf, equating sections, and pritchet seam width 0.7 cm, bend towards the inside, the second cut straps to bend 0.7 - 1 cm and hem by hand to seam primaqiune strap. 

8. Allowance for this when cutting, cut the lower bodice to bend towards the inside, tack and priotity. 

9. Baste and sew the side seams of the skirt. Travelling cut of the skirt is to stitch double line rare and collect Assembly. 

10. Processing podkralas the armhole facing.

11. To put the bodice on the skirt, combining the middle of the back with a seam in the middle of the rear panel and the middle shelf with the middle of the wedge. Tack and pritchet from the front side at a distance of 1 - 1.5 cm from the fold. 

12. To sew the hem in the skirt flared seam with double ACC cut, straight skirt, concealed stitches.



Category: A hundred styles of women's dresses | Added by: 20.10.2017
Views: 534 | Rating: 0.0/0

Total comments: 0
avatar