Dress light and dense fabric (sizes 48 - 58), one-piece, without side seams, with the undercut of the openings in the upper part of which is laid at two to three soft pleats or Darts. 

False side pockets with lagging. The back straight with one-way pleat in the middle. 

Vtachnoy sleeve, long, narrowed down. 

Collar telekrona stand, passing on the right shelf in the scarf, prodigieuses through the loop in the neck of the right shelves or through the buckle. 

The lower part of the scarf can be hemmed plaid or coloured fabric to match the dress.

A dress of this style is recommended for overweight women with protruding belly. 

Drawing style lines on the pattern (Fig. 104) 

the Style developed by the pattern of the basic drawing dresses. 

 The front and rear panels (Fig. 104). Fold the pattern back and front panels connecting the side cut (the pattern of the dress should be flared along the side cut, i.e. a straight line). On the back to build pelenocnuu rack. To do this, the height of the sprout defer up to 4 cm and from this point to the left of 0.5, see the Middle of the back to continue up to the level of point 4. From the point of intersection down to postpone 1 cm and from point 1 to the left 1 cm to Make a stand, as shown in Fig. 104. Continue the shoulder cut shelves to the height of the strut, i.e., at 4 cm up from point 4 at a right angle to postpone 1 seeFrom point 1 to the right to draw a line the length of the scarf - 8 - 10 cm (its length depends on the width of the fabric and the width of the laid pleat on the back).

Deepen the neckline (on the scarf) 1 cm Width of the scarf should end at the depth of the neck. 

 Flank. The depth of the openings to connect with the tuck at the waist line. Shoulder tackle and Darts to move the line of podraza barrel. For this purpose the ends of the Darts connect with the obtained line. 

 Line the entrance to the pocket. On the side cut from the waist down aside 10 - 12 see Point 10 to 12 to connect with traveling the tuck of the auxiliary line, the resulting line is split in half and down to postpone 2 cm to Draw a line the pocket's a smooth line, as shown in Fig. 104.

Pattern pieces are numbered and show the direction of the grain lines. 

Obtaining the modified pattern and cutting (Fig. 105)

For applying the pattern lines to cut. Fabric width can be from 100 to 140 cm If the fabric is narrow, put it in expanded form twice (two length plus the width plus the length of the barrel sleeve) face inward. When the width of the fabric 140 cm folded it in half inside out and fold fabric mid-back patterns the cloth to push back on unilateral width of the folds, i.e., 5 to 6 cm For transferring the Darts to do the undercut to the ends of the shoulder tackle and darted, not dorezaya 0,5 SL, to close the Darts, through which opens a new cut barrel (soft folds).Mark on the pattern the width of the pocket from the side of the cut (15 - 16 cm). The flank can be cut to fractional or transverse filaments, depending on the quantity and pattern of tissue. To find the side with the burlap pocket.

With the layout of patterns on fabric, you need to check the width of the dress at the hips. It should be equal to the semicircle hips plus 3 cm, ie, 52 + 3 = 55, see 

to Otkroite obtachku for processing the cut of the pocket, the width of which shall be equal to the entrance of the pocket plus 2 - 3 cm Length of burlap pocket is desired. To otkroite obtachku for processing tselnokrajnie stand. The width of the piping on the shoulder and around the neck needs to be wider than the stand height of 4 - 5 cm 

Allowance for seams and supplies shown in Fig. 105.

Tailoring 

1. To lay a snare for the main lines and shaped patterns.

2. To celebrate the middle of the front and rear panels dress slip stitch. 

3. To lay soft folds or zastrochit small tucks on the front panel of the dress at the cut edge of the barrel. 

4. Baste and sew tackle Darts on the back panel of the dress to iron the tuck from the inside out, and to press her to the middle of the back. Sew the pleat from the inside out in the middle of the rear panel and a crease on the front panel of the dress from the inside out, then lay the finishing line on the front side at 2 - 2.5 cm from the seam stitching folds (optional).

5. To handle the cut of the pocket podkralas the facing, applying her face to the side of the product. To equalize the cuts and pritchet seam width 0.7 cm, the bend facing towards the inside, releasing the roll from the side products by 0.1 - 0.2 cm, pin and slightly slanted stitches priotity. 

6. Allowance for this when cutting by shaped sections of the barrel to fold, to bend towards the inside, prometti, to put on the dress and tack transfer seam, aligning the snare. From the inside to tack along the thread flank with the dress, smatyvay at the same time the burlap pocket.

For ease of grinding of a processed slice of the pocket to impose on the flank, combining snares, and fasten with pins or a running stitch. Pre-routed pull string decal seam and begin stitching barrel with the dress, at the same time grinding off the burlap pocket. 

7. Baste and sew the shoulder seams and cut part of the side seam. 

8. Shoulder seam to bend the rack to nadsech, not dorezaya 0.2 cm to the seam, the seam resuturing. Processing rack podkralas the facing together with the scarf on the right shelf. 

9. Sew the seam and leave the top part of the sleeve. To handle the bottom of the sleeves podkralas the facing.

10. To votate and vacate the sleeve in the armhole. 

11. To prepare the loop to pull of the scarf. Obtachku width 6 cm, length 8 - 9 cm folded inside out, sew a seam width of 0,7 - 1 cm from both sides, leaving one slice open. Remove the facing on the front side, straightening the seam and priotity. To the front side of the bottom tselnokrajnie stand to make the loop face and pritchet double-stitching. Bend the loop up, the second cut to lay over the front of the left shelves, leaving the loop on the 5 - 6 cm, and secured to the stand facing and hand stitch mi.

12. Hem the bottom of the dress, to iron.