Friday, 29.03.2024, 08:18
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » A hundred styles of women's dresses

Dress mount wedge and drape at the top of

Dress of silk or cotton solid fabric (sizes 44-52), with open neckline and single cut shoulder flaps, the top of which laid two soft folds. 


On the front panel of the skirt of tselnokrajnimi valves ruched flared wedges. 


Back with deep cut leaf and a clasp, which ends with the valve. 


In the middle of the rear cloth from the valve flared wedge, a ruched top. 


Valves can be fastened by buttons. 


Sleeve one-piece, short. 


A dress of this style is recommended for slim and proportionally folded pieces.


Drawing style lines on the pattern (Fig. 150) 


the Style developed by the pattern drawing tselnokrajnimi bodice with short sleeve. 


 3аднее panel (Fig. 150, a). To increase the width of the cut sprout at the shoulder cut to the left for 6 - 7 cm, the notch depth in the middle back - about 12 - 13 cm. From the obtained point to the right and left delay by 4 cm to Make the cut of the Rostock, as shown in Fig. 150, and. From the waist line in the middle of the back of the cloth to delay down 10 cm, from point 10 to the right and to the left - half of the width of the valve, i.e. 4 cm For clearance of the valve from a point 10 delay down to 3.5 cm to Connect the dots of 4 and 3.5. Point 4 in the depth of the cut of Rostock to connect with point 4 of the valve. To raskleit dress hem.To do this cut the right side to set aside 10 - 12 cm, and from the middle of the back of the cloth to the left of 8 cm and plotting points to connect, shortening the wedge at oblique slices. To design wedge back the cloth from point 4 draw a line parallel to the middle of the rear cloth skirts (shown in phantom).

 The front panel (Fig. 150, b). To increase the width of the neck at the shoulder cut into 6 - 7cm, the depth of the cut in the middle of the front - on the 12 13 see From the received point to the left to snooze 7 to 8 cm, then continue the line to the width of the valve, i.e. 7 cm. Width of the valve split in half and the dividing point up to delay 3.5 cm to Make the valve and the neck, as shown in Fig. 150 b. To move the side tucks into the undercut of the valve to connect the end with the width of the valve, i.e. with the point 7. To obtain draperies to apply cut lines from the valve to the shoulder cut.Waist from the middle of the front cloth to defer half of the width of plastron, i.e., 6 cm From point b to the left to defer the width of the valve at the waist, i.e. 6 cm. Width of the valve at the waist line to divide in half, and from the points of division delay down to 10 cm From the points to the right and to the left to lay half the width of the valve, i.e., 4 cm, and from point 10 down to delay 3.5 cm and place the valve, connect the dots 6, 4, 3,5, 4, 6. From the second line of the wireline valve to build the tuck depth of 4 cm, a length of the shelf 12 cm and the skirt is 13 - 14 cmTo receive rasciesa wedge front cloth must be applied to the hips. From the waist line in the middle of the front cloth to defer 19 cm and draw a line up to the side of the slice. From the end of the pulley-block Darts to a straight on the hips and from the points obtained the right to postpone 2 see Connect a second line of tackle Darts with point 2, continuing it to the intersection with the bottom line. For the application of rasciesa of the plastron from the valve end to hold straight on the hips and supply point b. Point 6 and connect to b, continuing the line to the intersection with the bottom line. For oblique cuts from the hem to shorten the wedges 1 cm

Pattern pieces are numbered and show the direction of the grain lines. 

Obtaining the modified pattern and cutting (Fig. 151) 

For applying the pattern lines to cut. 

 3аднее panel (Fig. 151, a). On the pattern to cut out two parts. The pattern on the fabric to put it so the middle of the wedge was the common thread. The neckline of Rostock, clasp and at the bottom of the valve to make podkraj. 

 The wedges for the front and rear panels (Fig. 151, b, C). To receive the flared gussets (item 2) from the bottom of the cut and push on 13 - 15 cm priborki the top of the wedge add along the lines of the side sections 4 cm (Fig. 151, C). 

 Side detail front cloth (Fig. 151, g). On the put line from the valve to the end of the side tuck make a cut, not dorezaya 0.5 cm Tuck to close, whereby the opening of the new tuck in the undercut of the valve. For priborki from valve to make a cut on the plotted lines, not dorezaya to placeboo slice of 0.5 cm, and the details of the patterns to be expanded to 4 - 5 cm For machining valves to otkroite piping. Traveling the tuck end to the waist line cut for ease of handling the valve. 

 Plastron (Fig. 151, d). For applying lines to cut the upper part of the pattern and push for draping for 3 see the Middle pattern of the plastron put to the bend of the fabric. The wedges for the front cloth to cut out the pattern parts 2. 

The seam and stocks is shown in Fig. 151.
 


Tailoring 

1. To celebrate the middle of all of the parts of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Lay the drape in the undercut of the neck from the valve. 

4. Handle loops on the valves and the clasp back. 

5. Baste and sew the valve into the undercut folded flap with a shelf inside out, the seam priotity to the valve.

6. Processing valves below the waist line podkralas the facing. Fold the facing to the valve face inside, tack and pritchet seam width 0.7 - 1 cm In the corners the excess tissue to cut, to fold the facing in the direction of the back seam to straighten, sweep, priotity. Hem hand loop stitches. 

7. To gather upper edge of the wedges rare double stitching. Tack one-piece valve to the wedge, combining snares. Sew the sections of the wedge and piping. Baste and sew tackle Darts simultaneously vracheva wedge, to press the seam to the middle front.

8. To collect the plastron, i.e. the cutting wedge at the top of the bodice rare double stitching. 

9. Sweep plastron with side detail dress, dispensing assemblies to the chest. Baste and sew from the side of the plastron, grinding the seam to press against the side of the slice. 

10. Processing podkralas a facing the pin and the valve at the back of the cloth. Fold the facing closure flap and face inward, tack and pritchet, nadsech corners. In the Cape the excess tissue to cut, to fold the facing towards the inside, releasing the roll from the side products by 0.1 - 0.2 see

11. To prioraty wedge back at the upper slice. Tack one-piece valve to the wedge, combining snares. 

12. Cape to undercut the right cloth back cut. Tack and pritchet harvested wedge through podraza, then pricecat from podraza down the left and right panels. The facing of a fastener through podraza bend inward and sew hidden stitches for the seam primaqiune wedge. 

13, Baste, and sew tackle Darts in the back. 

14. Baste and sew the shoulder seams and press them towards back.

15. Treating neck podkralas the facing. Sew sections of obcutek at the shoulder cut, stitch resuturing. Tack the facing to the neckline, folded them face inward, pricecat from the product seam with the width of 0.7 - 1 cm to Turn the facing inside out, sweep out, releasing the roll from the main part. The second section of piping to stitch on the machine and attach to the shoulder seam hand stitches. 

16. Baste and sew the side seams, resaturate, then press to the front panel.

17. Sew the seam of the piping to handle the openings, and then tack the piping to the armhole, adjusting the slices to pritchet, the bend facing towards the inside. The second section of piping to bend, hem or hand stitches to pristroit on the machine and attach in several places. 

18. Hem the bottom of the dress, to iron and to sew.



Category: A hundred styles of women's dresses | Added by: 20.10.2017
Views: 433 | Rating: 0.0/0

Total comments: 0
avatar