Dress of cotton fabric (sizes 46 - 52), cut at the waist. 


The upper part of the bodice is cut in the form of wide straps and is gathered at the back. 


Straps form a visibility collar. 


The skirt of the eight wedges of the lower part of them are cut with an oblique arrangement of the strips of fabric. 


A dress of this style for slim figures can be prioraty at the waist. 



Drawing style lines on the pattern (Fig. 133) 



the Style developed by the pattern of the basic drawing of the bodice. 



 Back (Fig. 133, a). From the depth of the cut sprout in the middle of the back down put the 12 - 15 cm and the obtained point linking is the height of Rostock. Width of straps in the form of a collar equal to the width of the shoulder, which connect with the middle of the back at the waist. Since the dress is sleeveless to reduce the cut-out openings, extending side cut up into 2 - 3 cm, and place it as shown in Fig. 133. 



 Shelf (Fig. 133, b). From the depth of the neck down to lay 10 - 12 cm From a point 10 to 12 to hold the line of the cut straps (item 3) to the intersection with the armhole. To reduce the cut-out openings, extending side cut up 2 - 3 see the Rest of the shoulder Darts to move to the waist. To do this, apply the cutting line by connecting the ends of the pulley-block and the shoulder Darts. 



 Skirt. For cutting vosmikova skirts must have a bushel full of waist circumference (=76 cm) and divide it by the number of wedges, in this case 8: 76 : 8 = 9,5 + 3,5 (for seams) = 13 cm - the width of the wedge at the waist line. The width of the bottom of the wedge needs to be 3 times wider than the wedge at the waist: 13 X 3 = 39 see 



 the construction of the wedge (Fig. 133,). To draw a line, measure an equal length of the skirt, i.e. 76 cm. From the received lines up to the right and to the left to defer half of the width of the wedge at the waist, i.e., at 6.5 cm, and the bottom also in both directions - one half of the width of the wedge at the bottom, i.e. 19.5 cm



From bottom line on the first line of wedge defer up to 35 cm, the 15 cm Point 35, 15 to join. 



Pattern pieces are numbered and show the direction of the grain lines.





Obtaining the modified pattern and cutting (Fig. 134) 


 Back (Fig. 134, a, b). For applying the pattern lines to cut. When cutting parts of patterns to put so that the direction of grain lines on the fabric matched with a partial thread in the pattern. 



 Shelf (Fig. 134, C, d). On the parts 3 of the shoulder tuck to close, whereby the opening of the new tuck to priborki on the bottom straps. To increase the Assembly to extend the pattern to 6 - 8 see the Rest of the shoulder Darts on the shelf to move to the waist. To do this, from the end of the pulley-block Darts to cut the pattern to the end of the shoulder, not dorezaya 0.5 cm the rest of the Darts to close and open a new tuck, enhanced on the waist line. Traveling tuck to reduce. For this side-cut to remove the migrated depth of the shoulder tuck or write (optional), and the excess fabric to prioraty at the waist. 



 Wedge (see Fig. 133,). In the lines to cut off the lower part of the pattern (part 6). When cutting to arrange the details of the patterns so that the direction of grain lines on the fabric matched up with a partial thread in the pattern. 


For belt to carve out a strip of cloth with a width of 6 cm and a length equal to the waist circumference plus 25 - 30 see 


Details of the patterns to spread the fabric, as shown in Fig. 135. 


The seam and stocks is shown in Fig. 135.
 

Tailoring 

1. To celebrate the middle of all of the parts of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. The lower section of the straps of the shelf(item 3) to stitch a double line rare and prioraty. 

4. Baste and sew in the middle of the straps in the back (part 1), stitch resuturing. When grinding to ensure the stripes matched. 

5. Cuts the straps to bend towards the inside in the width of the seam allowance given in the pattern cutting, to prometti and priotity, then apply on the back, combining basic line patterns, pricecat the front of the thread to match the product by 0.1 - 0.2 cm from the fold.

6. Baste and sew the shoulder seams of the back straps with shelf, seam to press in the back side. 

7. Handle Rostock podkralas a facing, neckline equity. Sew the ends of otacek, stitch resuturing. Fold the facing and the neck face inward, equating sections, the seam resuturing. To bend the piping towards the inside, releasing the roll from the side products by 0.1 - 0.2 see

8. Allowance for this when cutting along the upper cut shelves, to bend towards the inside in the width of the seam allowance, then put on the straps, combining the main lines of the pattern, and pricecat the front of the thread to match the product by 0.7 - 1 cm from the fold. 

9. Baste and sew the side sections of the seam to press in the direction of the shelves. 

10. To connect the pieces of the wedges, folding parts 5 and 6 facing inwards, sew, seam piecing together bend towards the bottom. Baste and sew the wedges from the waist down. 

11. Tack and pricecat the bodice to the skirt. 

12. Hem the bottom of the skirt, ironed dress.

13. Fold bias strip of fabric for the belt face inward, sew and fold on the front side.