Dress of silk or cotton, plain or colored fabric in small patterns (sizes 46 - 52). 

Shelf carved. 

Separately cut unfastened beyka gives the impression of Figaro. 

The full skirt is laid inverted pleats. 

Each side inverted pleats at the line terminations of the bodice is laid in soft folds. 

On the back clasp. 

Rostock decorated with a deep neckline. 

The neck of the caret with the laid soft folds. 

This style of dress is recommended for women of high and medium growth, medium fullness.

At the figure with wide hips, soft gathers at the line terminations of the bodice can not do. 

Drawing style lines on the pattern (Fig. 197) 

the Style developed by the pattern drawing tselnokrajnimi bodice with short sleeve. 

 The backrest (Fig. 197, a). Rostock at the shoulder slice to expand to 1 - 3 cm, and in the middle of the back to deepen to 8 - 10 cm (optional). Plotting points to connect. 

The back from the waist extending 3 to 5 cm To the middle of the back to give allowance for the setting of the fastener of 2 cm 

 Shelf (Fig. 197, b). The width of the neck at the shoulder slice to increase by 1 - 3 cm From the bottom of your neck down to postpone 6 to 8 cm and from the received point to the right and to the left by 3.5 cm to form the mouth of the connecting point 1 - 3 and 3.5. From the angle of the neck to cause the location of the soft folds. To do this, connect the angle of the neck with the first line shoulder and tuck the end of it, as shown in Fig. 197, b. A side cut from the armhole to the waist line to divide in half and breaking point to connect with point 3.5 in neck for entry of the shelves.Conducted a line divided into four parts and from the points of division down to postpone 2 cm, then 3.5 cm and 3 cm, plotting points connect smooth lines. From the points of division on side cut down to postpone the width of the borders (7 cm). From point 7 to hold a smooth line parallel to the top, continuing it from the middle of the front right 7.5 cm Obtained point to connect with the middle shelves.

Shelf from the waist line in the middle of the front and side cut to extend 3 to 5, see 

Obtaining the modified pattern and cutting (Fig. 198) 

 Back (Fig. 198, a). By the middle of the pattern backless add 5 cm to handle the zipper (2 times wider than length plus 1 cm for the seam). 

 Shelf (Fig. 198, b). When cutting the top of the shelves (part 2) for applying lines to make a slit from the neck to the shoulder cut and the end of the shoulder tuck. Tuck closed, whereby opening of the new tuck in the neck for the formation of soft folds. On the second line cut the upper part of the pattern to take up so that the depth of the upper and lower folds in the neck was the same. Beyka (item 3) to find the pattern four parts. 

Pattern the bottom of the shelves (part 4) middle to put the fold of the fabric and cut out with wide borders. 

 Skirt (Fig. 198,). For cutting skirts need a bushel full thigh circumference (104 cm) and a free fit 4 cm: 104 + 4 = 108 cm 

For the skirt fabric required for the width of three full thigh circumference: 108 X 3 = 324 cm required fabric width and the length - length skirt made plus 7 cm of filing of the bottom and connection of the bodice to the skirt.

To determine the distance between the folds measure thigh circumference divided by the number of folds (this style has 9 folds) - 108 : 9 = 12 cm To determine the depth of each fold of the total width of the fabric to take away the removed measure the circumference of the hips along with the addition of free customized fit: 324 - 108 = 216 see the Rest of the fabric divided by the number of folds, i.e., 216 : 12 = 18 cm (the depth of each fold).

On the top and bottom sections of the skirt to mark the depth of the folds and the distance between them. In order to find the inner crease of the folds, it is necessary depth of the folds (18 cm) divided into four parts.

To determine the depth of soft folds, measure the width of the bodice at the line terminations and the width of the skirt laid in folds. From the width of the skirt to take away the width of the bodice, the remainder divided by the number of soft folds (i.e., 18) that are distributed on each side of inverted pleats. 

 Note. Inverted pleats are pleats in which the folds are directed towards each other.

The seam and stocks is shown in Fig. 198. 

Tailoring 

1. To celebrate the middle of the back and forepart cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Mark the folds of the fabric and check whether the seam of the piecing together of panels in the inner fold of the pleats. Sew all the panels, leaving one seam not statendam. 

4. Hem hem concealed stitches. To lay the folds according to the style. 

5. Traveling sew Darts on the back, handle fastener allowance of cloth given when cutting.

6. At the top of the bodice at the neck to lay soft folds according to the style. Connect the middle-right shelf left to run. 

7. Sew the borders on the bottom slice, turn on the front side, releasing the roll from the top bakey, prometti, priotity. 

8. Traveling sew Darts on the shelf. All three parts are the carved lines to connect one internal bridging seam. 

9. Sew shoulder and side seams. 

10. To handle the sprout, the neck cross obrazkami.

11. Armhole to handle podkralas or oblique facing (binding). If the fabric is transparent, Rostock, neckline and armhole double handle folded wrong side inside slant obrazkami. To put a facing on a front side of the product, equalizing sections, and oblachat from the piping seam with the width of 0.5 cm, not destrucive to its ends at 3 to 4 cm, then the ends of the piping stitch in the unfolded state, the seam resuturing and continue stitching on portchannel part of the neck. The bend facing towards the inside, inner edge to attach each 4 - 5 cm 5 - 6 stitches.

12. The cut of the bodice bend on the wrong side on the width of the seam allowance, to cover, to put on the front side on the top of the skirt, aligning the snare, and stitch 1 - 3 cm from the bend. 

13. To iron dress.