Wednesday, 24.04.2024, 03:33
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » A hundred styles of women's dresses

Dress with a wide flounce pleated

Dress made of cotton fabric or artificial silk (sizes 46 - 56), cut above the waist line. Shelves with sunset and soft pleats from podraza. The rear panel of the three wedges with flared flounce a pleated. Neck Cape. Dress is trimmed with piping finishing of fabric to match the polka dots. 

A dress of this style women small stature is not recommended. 

Drawing style lines on the pattern (Fig. 153) 

a Style developed by the pattern drawing tselnokrajnimi bodice with attached short sleeve and gusset. 

 The rear panel (Fig. 153, a). The height of the sprout to stand up to delay of 1 - 2 cm mid-Line of the back to continue up to the level of stand height, i.e., points 1 - 2. Plotting points to connect, and from the point of intersection delay down to 0.5 cm to Make a stand.

The width of the shoulder is split in half and the point of division to connect with the end of the pulley-block Darts. To fit blades to make a tuck a depth of 1 cm the skirt Length at the middle of the rear panel and the side cut from the waist to the hem is divided into three parts. Draw a cut line of the flounce from the skirt, connecting the lower points of division a smooth line. For rascles wedges to continue the line of tackle Darts to the cutting line of the shuttlecock skirt. Rascles wedges can be reduced (optional). 

 The front panel (Fig. 153, b). To find the line of Pedraza, the middle shelves from the depths of the neck to the waist line to split in half and the dividing point (for length of shelves) to hold the line to the right from the middle of the front 5 cm and 5 to connect the end of the side tuck. The line is the cutting line shelves from the skirt. The first line of tackle Darts continue to the intersection with the specified line podraza. For tselnokrajnie continue to stand shoulder cut in the side middle shelves at 1 cm From the points obtained up to postpone 2 cm.To make the rack, connecting point 2 with the top cap, and then with point 5, as shown in Fig. 153 b. Apply three cut lines to drape over the connecting point of the dividing of the middle shelves with the top of the neck. The second and third lines run parallel to the first distance between them of 2 cm.

A cut line of the frill on the front panel of the skirt to mark the same as on the rear panel. 

For rascles wedges to draw from the end of the pulley-block darting to the cutting line of the ball, parallel to the middle of the front panel. From the point of intersection of the left and right to postpone 2 cm Depth of tackle Darts connect with the dots 2. 

Pattern pieces are numbered and show the direction of the grain lines.
 


Obtaining the modified pattern and cutting (Fig. 154) 

For applying the pattern lines to cut. In order not to disrupt the contour lines of the pattern, translate the flared wedges cutter, placing the pattern paper, or cut teeth. 

 The rear panel (Fig. 154, a, b). When cutting back the cloth dresses the middle of the pattern of the shim (1) to put to bend the fabric of common thread, the pattern side of the shim (2) to pin the fabric in expanded form so that the lobe thread took place in the middle of the wedge. 

 Shelf (Fig. 154,). To carve out two parts. To obtain soft pleated lines caused the pattern to be cut from the bottom to the shoulder cut, not dorezaya 0.5 cm, and take part of the pattern to the right with a distance between them of 3 cm For treatment of the neck when cutting to give allowance to the left and right shelves to 5 cm 

 Pattern medium wedge front cloth skirts (Fig. 154, g) when cutting to put at the bend in the fabric the common thread. 

 The pattern side of the wedge (Fig. 154, d) put on fabric so that the middle was the common thread. To carve out two parts.

When cutting the ruffle fabric required 3 times more line terminations. The length of the flounce should be equal to the length of the pattern plus 3 cm for seam and 4 cm on the filing of a bottom. For example, the line terminations is equal to 170 cm 170 X 3 = 510 see 

the seam shown in Fig. 154.
 


Tailoring 

1. To celebrate the middle of the shelves and waist line cushioning seam. 

2. Sweep wedges in the rear panel of the dress. To smatyvay on the table, folded slices of wedges. To combine the control points at the waist, chopping. To smatyvay from the top down, landing in a sideways wedge in the blades. Sew the wedges on the middle wedge. To press the seams towards the middle of the back. Neaten the slices from the inside.

3. To pristroit the facing to the front of the back, folded them face inward, pristroit turn inside out, releasing the roll from the stand. Priotity rack.

4. Tack and pristroit edge from the inside to bend the setting of the shelves (to take the edge of the main fabric with a width of 1 cm). 

5. Baste shoulder seams, simultaneously with the facing of the back counter and shelves, lightly landing on the back in the blades. Sew shoulder seams. In the area of the top of the neck and sprout to do the notch, the seam stands to resaturate, shoulder seam to press in the back side. Remove the facing of the rack, the second section of piping to bend 0.5 cm towards the wrong side, sew from the fold to 0.1 cm, to iron, is then fixed to the columns. 

6. To build and consolidate a mild tuck on the shelf.

7. Baste and sew the wedges front cloth dresses. Bend the upper section of the wedges (3 cm allowance given to the seams and the reserves for adjustment in the fitting), baste, and Topstitch on the bodice with a seam width of 0.1 - 0.5 cm and priotity.

8. Baste and sew the side seams, resuturing. 

9. To votate and vacate gusset, vracheva in the main part. The seam resaturate, then press and stitch on the front side by 0.1 cm from the fold on the main part. 

10. To handle the bottom of the sleeves podkralas the facing. 

11. Bend the lower section of the skirt. 

12. Hem the bottom flounce. 

13. Lay on the flounce of pleats.

14. Pin the skirt to flounce, baste, and then Topstitch (stitch width of 1 - 1.5 cm). 

15. In the seam of primaqiune skirt to the bodice and sleeves to tack the velvet ribbon or bake of finishing fabrics and sew hidden stitches.



Category: A hundred styles of women's dresses | Added by: 20.10.2017
Views: 469 | Rating: 0.0/0

Total comments: 0
avatar