Dress from solid-color fabric or fabric in small checks, stripes (sizes 42 - 64), one-piece. The front part of the bodice with tselnokrajnimi collar and double-breasted closure with two buttons. This dress can be worn with the waist Darts and no waist. You can make the finish: zastrochit sashimi or a cord stitch on side panel. When carrying dresses of plaid or striped side parts should be cut out of oblique, transverse or equity to the thread direction. 

A dress of this style is recommended for the fuller figure. 

Drawing style lines on the pattern (Fig. 333)

Style developed on the pattern of the basic drawing dresses. Contoured lines on the pattern to apply in expanded form.

 The front panel (Fig. 333). To build a one-piece collar. From the depth of the neck down to postpone 6 see Point 6 to connect the top of the neck by a straight line and continue it to the width of the cut of the Rostock plus 1 cm, i.e. 7,5 - 8 cm From the point at right angles to a line drawn to postpone the width of the collar (8 cm), and point 8 up to 1 cm depth of the neck right to defer 5 cm From point 5 up to postpone 2 see Points 1, 2 and the depth of the neck to connect. Double-breasted closure point 5 to connect with the first line of tackle Darts.

The first line shoulder Darts on the right shelf to connect with the first line of tackle Darts. On the second line of tackle Darts up to delay 10 - 12 cm Side cut from the armhole to the waist line to divide into three parts. Lower breaking point to connect with point 10 - 12. The resulting line is divided into three parts. For drawing cut lines on the sides are shelves on the remainder of the shoulder width from the second line of the Darts split in half, the resulting point to connect with the second point of division. 

Pattern pieces are numbered and show the direction of the grain lines.
 

Obtaining the modified pattern and cutting (Fig. 334) 

For applying the pattern lines to cut. 

 The rear panel to find the pattern basic dress with no modifications. 

 The front panel (Fig. 334, a). The middle of the pattern to put the fold of the fabric at common thread. Before we will open to check whether the combined right and left sides of the skirt pattern PA of the incision above the waist, traveling Darts and side cut. Then the cloth is spread out on the table in expanded form face-up. The middle of the front must pass the common thread. 

 The flank (Fig. 334, b). To carve out two parts on the twice folded tissue. To obtain soft pleated lines the pattern to cut and take the right part of it on 4 - 5 see 

 the Front part of the left shelf (Fig. 334, a). In order not to disrupt the contour lines of the pattern, translate the cutter, or through the thin paper with the pattern front cloth plastron with tselnokrajnimi the collar to the waist line. Cut and squeeze the tissue so that the middle of it was the common thread. 

To otkroite the upper part of the collar on the bottom (shown in Fig. 334, and strokes).
 

Tailoring 

1. To celebrate the middle of the back and forepart cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew tackle Darts at the back. 

4. On the bottom cut of the barrel to lay soft folds. 

5. The plastron make nadechka. Baste and sew the side line of podraza (above waist line) the left and right sides of the product.

6. To prepare the belt. To put the lower part on the front panel so that the middle rests on the waist and ends at mid-depth of the tuck, and tack. Sweep the flank with the front part of the left and right shelves from the shoulder cut, combining the checkpoint and continuing to smatyvay and sew Darts below the waist on 3 - 4 see the Rest of the length of the pin tuck cross stitching. 

7. Baste and sew the shoulder and side seams. 

8. On the right shelf at the waist to handle obtenue loop. 

9. To process one-piece collar (see feature 80). 

10. To votate and vacate sleeves in armhole.

11. To sew the hem and iron.