Dress of wool or heavy cotton fabric (size 44 - 56), cut above the waist line. On the shelf instead of the three Darts laid soft folds. Clasp in the middle of the front with two buttons. 

The back is slightly gathered. Sleeve one-piece, three-quarter. The neckline is trimmed notched slats in the form of a collar. 

The skirt Welt pockets with flaps unfastened. 

Dress is decorated with a nylon scarf, hand-picked to match the fabric. 

Dress this style suits women tall and women with protruding belly. Flap pockets conceal a lack of figures.

For short this dress is not recommended, as cross carved line visually reduces growth. 

Drawing style lines on the pattern (Fig, 49) 

the Style developed by the pattern drawing of the bodice with tselnokrajnimi sleeve and gusset. 

 3аднее panel (Fig. 49, a). Side cut backless split in half and hold the cut line to the intersection with the middle of the back of the cloth. 

 Strap backless (part III). The height of the sprout up and to the left at the shoulder cut, and the depth of Rostock up and down to lay the half-width of the strap, i.e., 2,5 cm 

 Front panel (Fig. 49, b). From the waist line on the side cut up to postpone the cut, equal cut on the side of the backrest. To draw a line to the intersection with the middle of the front panel. Up from this line to defer 2.5 cm and draw a cut line of the front of the skirt, as shown in Fig. 49 b. To receive folds or assemblies at the bottom of the bodice side tuck to move to the bottom of it. For this purpose, the tuck end to connect with a line cut skirt. 

 Plank shelves (part VII). From the top of the neck right and left shoulder cut to defer 2.5 cm, up to 1 cm depth of neckline in the middle of the front down to delay 5 - 6 cm From the mid front to the right for entry of a fastener and to the left to lay the half-width of the strap, i.e., 2.5 cm Bar to draw a smooth line, as shown in Fig. 49 b. 

 The line of entry into the pocket (part VI). From the waist line on the first line tuck down to defer 5 cm, side cut - 10 - 12 see Point 5, 10 - 12 to join. The width of the valve from the line entrance to the pocket on the side cut 7 - 8 see Point 7 - 8, 5 to connect a smooth line. The remainder of tackle Darts on the skirt to move to the side cut. 

Pattern pieces are numbered and show the direction of the grain lines.
 

Obtaining the modified pattern and cutting (Fig. 50) 

 of the Backrest (Fig. 50, a). For applying the pattern lines to cut. The upper back to find a common thread. By the middle of the back to give a seam allowance of 1.5 cm for the remaining sections of the seam and supplies shown in part I. 

 3аднее cloth skirt (Fig. 50, b). The middle of the pattern of the skirt is put to the bend of the fabric. On the upper cut of the skirt give a seam of 3 - 4 cm, lateral - 2 - 3, for filing bottom - 5 - 6 see 

 Shelf (Fig. 50). Cut the bodice pattern from the bottom to the end of the side tuck, not dorezaya 0.5 cm Tuck to close, whereby the opening of the new tuck hem for assemblies. For more depth folds the pattern to push the cut lines tuck (optional). By the middle of the shelves to give allowance for primaqiune strap 0,7 - 1 cm In the remaining sections of the seam and stocks give the same as on the back. 

 The flank (Fig. 50, g) to find the common thread along with the bottom part of the burlap pocket. Internal cutoff to give an allowance of 2 cm, at the bottom of the burlap - 1 cm, on the remaining slices, 2 - 3 cm.

 The front panel of the skirt (Fig. 50, d). The middle of the pattern is put to the bend of the fabric. With the pattern the front piece of cloth to translate cutter (or thin paper) in the form of the valve, cut it, attach the pattern of the valve from the line entrance of the pocket up and aboliti on the fabric the shape of the valve. Then carve out together with the skirt (part VI). On the top cut to give allowance of 2 - 3 cm, inside 2 cm, in the unfastened valve parts for processing - 0,7 - 1 cm On a lateral slice on the bottom of the skirt to give the allowance the same as on the rear panel of the skirt. To handle pockets otkroite burlap along with the valve. 

 The bar collar to cut out the pattern (part III, VII). For the back to find two parts for the front four. 

The seam shown in Fig. 50.
 

Tailoring 

1. To celebrate the middle of the back and front panels of slip-stitch. 

2. To lay a snare for the main lines and shaped patterns. 

3. To stitch along the lower cut backless double stitching rare, prioraty it. To lay the folds, or to do an Assembly on the shelf. 

4. Baste and sew the shoulder and side seams, the bottom seam of the sleeve. Seams to press the lower seam in the front part of the sleeve shoulder in the direction of the back, side to side shelves. 

5. To vacate gusset.

6. Baste and stitch upper and lower straps at the shoulder sections, the seams resuturing, handle loop on the right top of the bar one or two obrazkami. Fold up the bottom and top slats face inward and sew at the escape part. Remove the strap on the front side, releasing the chute from the upper limit by 0.1 - 0.2 cm, prometall and priotity.

7. Prepared the bar for the bottom part to put on the front of the bodice to the neck, equalizing the slices. From above impose the lateral facing of a width of 3 to 4 cm Sew all four layers, the seams resuturing, the bend facing towards the inside, prometti, the second section of piping to bend 0.5 cm and sew to the product manually. 

8. To handle the lower section of the sleeve facing podkralas.

9. Podkralas the handle facing flap pocket, folding the facing and the valve face inside. In the corners to make the notch, turn the valve on the front side, releasing the roll from the piping by 0.1 - 0.2 cm, prometall and priotity. 

10. Fold the flank (part V) and the front panel of the skirt inside out, then sew the inner seam at the same time grinding off the burlap pocket. 

11. Baste and sew the side seams of the front and rear panels of the skirt. 

12. Allowance for this when cutting along the upper cut of the skirt, bend towards the inside, and prometti priotity.

13. Apply the skirt to the bodice, aligning the main lines of the pattern, and sew the inner seam or Topstitch finishing stitching on the front side seam width of 0,7 - 1 cm 

14. Hem the bottom to iron the dress and to sew on buttons.