Dress of silk or fine wool fabric (sizes 46 - 52), cutting above the waist line. Skirt without traveling tucks, laid with lush front and back inverted pleats. Nastraivatsa skirt front to bodice wide finishing line. Pleats secured with clips. Sleeves vtachnye or tselnokrajnie ending cuffs. 


Collar - telekrona stand. 


A dress of this style is recommended for young slim women. 


Drawing style lines on the pattern (Fig. 64) 


the Style developed by the pattern of the basic drawing dresses. 


 The rear panel (Fig. 64, a). The height of the sprout defer up to 2.5 cm, the Middle of the back to continue to a level stand height, i.e. the point of 2.5, the resulting points and connect from the intersection points down to postpone 1 cm and 2,5 from the point to the left of 0.5 cm to Make the rack, as shown in Fig. 64.


Traveling tuck to move to the middle of the back of the cloth and build it to a depth of 3 cm, and the rest of the tuck, i.e. 1 cm, to make the side cut. From the waist line in the middle of the back of the cloth to defer up to 6 cm lateral cut from the armhole to the waist to split in half and the resulting point is connected to point 6 a smooth line - this is a line cut of the bodice from the skirt. The width of the pattern of the skirt at the waist and hem split into three parts and the dividing point to connect. 


 The front panel (Fig. 64, b). Shoulder cut to continue to the right by 1 cm and from this point up to defer 2.5 cm From the depth of the neck up the middle of the shelves to continue to 8 cm and place the rack as shown in Fig. 64 b. A side cut from the armhole and middle of the shelves from the neck to the waist line to divide in half and plotting points to connect a smooth line, then move the shoulder dart. 


From the middle of the shelf on a smooth line to delay the left 2 cm and the obtained point to connect with the waist line. Apply cut lines from the end of the pulley-block to tuck the bottom of the skirt and from the depths of her to the side cut.


Pattern pieces are numbered and show the direction of the grain lines. 


Obtaining the modified pattern and cutting (Fig. 65) 


For applying the pattern lines to cut. The backrest (Fig. 65, a) be cut out of the pattern. 


 3аднее cloth skirt (Fig. 65, b). The pattern cut from the hem to the side cut, not dorezaya 0.5 cm of the Fabric to bend from corner to corner (like a shawl) and fold it must pass through the bias thread. The pattern for the incision lines to move away from bend weavers right up to the edge with the same distance between the parts of the pattern. To cut out this skirt, you need a fabric with a minimum width of 110 cm 


 Shelf (Fig. 65,) be cut out of the pattern. 


 The front panel of the skirt (Fig. 65, g). The pattern cut from the hem to the side cut, not dorezaya 0.5 cm to cut out the front panel of the skirt, the fabric to bend and pattern to decompose in the same way as for the rear panel. Traveling a tuck above the waist line to close. The middle of the belt to attach to the fold of the fabric, resulting in work rascles bottom line for an inverted pleat (15 - 18 cm). Side detail skirt aside to the edge of the fabric and cut out. The skirt length when cutting to verify from the waist line. For the treatment of the collar stand to the shelf and back to otkroite piping.


The seam and stocks is shown in Fig. 65.
 

Tailoring 

1. To celebrate the middle of the back, the shelf front and rear panels of the skirt of the cushioning seam. 

2. To lay a snare for the main and shaped lines. 

3. Baste and sew the Darts, shoulder and side seams. 

4. The neck of the handle podkralas the facing without a seam in the middle of the shelves or with a seam. If the facing with a seam, sew it in the middle from the bottom to the end of the section. The seam resuturing.

5. Sew shoulder seams of otacek, Rostock and neck, folding them inside out, stitch resuturing, then the facing to attach to the neckline facing inside and pritchet from the inside of the product, making the turn at 1 - 2 injection needle at the end of the section. Joint width 0.5 cm Seam primaqiune at the end of the section to nadsech, not dorezaya to line 0.1 cm of Piping to bend towards the inside, the seams of primaqiune and spread to cover. 

The second slice of obcutek to bend towards the inside by 0.5 cm, stitch at 0.1 cm from the fold and attach to the product manually.

6. Lay pleats on the front and rear panels of the skirt, reducing the depth of their to the waist line. Baste and sew the side seams. 

7. The front panel of the skirt through the middle of the front to cut down, not dorezaya to the waist line 4 - 5 see Figure a cutout handle podkralas the facing. 

To baste skirt to bodice seam iron, combining the snare. 

The front and rear panels of the skirt above the waist line to crease to pricecat to the bodice, inseam, and in front from the crease to a wide Topstitch finishing line width of 2 - 2.5 cm the ends of the folds at the waist to fasten with clips.

On the reverse side tack a piece of lining fabric, apply the contours of the silk tie or grosnay thread, then the first puncture needle from the inside out from the top of the tie. Derived on the front side of the string to lay on the side of the triangle, filling it. The thread should be laid tightly one around the other, with the same tension. The tack used for decoration, fixing grooves, pockets, slot and the ends of the folds. Run the tack shown in Fig. 66.

8. To handle the bottom of the sleeves with obrazkami and make a fold-over cuff. To prepare the cuff, folding the upper and lower parts face inward, equating sections, and pristroit. To twist it on the front side, straightening the corners, seams and priotity. The ends of obcutek sew a seam width of 1 cm Seam resuturing. Prepared to put cuffs on the front side of the bottom of the sleeves and the top, tack the facing, then sew all four layers of the seam to resuturing, the bend facing towards the inside. The second section of piping to sew hand to sleeve. 

9. The prepared sleeve wmeat and vacate in armhole.

10. Hem hem, to iron.