Dress of a monochromatic light silk cloth (sizes 46 - 52), cut at the waist with an elongated Cape on the front panel and clasp at the shoulder seam. At the mouth laid soft folds. The full skirt, cinched at the waist. Snap strap covers the seam primaqiune bodice to the skirt. 

Vtachnoy sleeve, three-quarter. Collar bias binding of the two halves. 

A dress of this style it is recommended that the skinny females of high growth with poorly developed hips and long neck. 

Drawing style lines on the pattern (Fig. 118) 

a Style developed by the pattern of the basic drawing dresses.

 Shelf (Fig. 118, a). To get the soft folds or Assembly in the neck, shoulder tuck to move into the neck. To do this, the neck split in half and the resulting point to connect with the end of the shoulder tuck. For receiving an elongated bodice in the middle of the shelves from the waist line down to delay 5 to 6 cm Draw a line the bottom shelves, as shown in Fig. 118. 

 3аднее cloth skirt (Fig. 118, b). The skirt pattern tackel tuck close, due to what happens rascles bottom line. To build a strap from the waist line in the middle of the cloth back and side-to defer cut down to 4 cm, and up - 1 see Connect the dots 4, 4 and the point 1, 1 a smooth line. 

 The front panel of the skirt (Fig. 118 in). The skirt pattern tackel tuck close to the same as on the rear panel. From the waist line on the side cut down to postpone 4 cm and up to 1 cm From the waist line in the middle of the front of the cloth down to delay 5 - 6 cm and from this point 10 see point 10 to be postponed for the half-width of the strap in direction, i.e., 2.5 cm, and place the bar of the connecting point 1, 5 - 6, point 2.5 and 4, 2.5, as shown in Fig. 118, V. waist Line front and rear panels of the skirt and the bottom divided into three parts. From the obtained points to put the cut pattern. 

 Collar to the shelf (Fig. 118, g). To construct a rectangle of width equal to the width of the collar, i.e. 7 cm and length 24 cm (collar length is equal to the line of the neck). The width of the collar is split in half and the points of division to be postponed for 3 cm for mysyk. Draw the collar as shown in Fig. 118, 

 Collar to the back (Fig. 188, d). To construct a rectangle of width 7 cm and length of 22 cm (collar length is equal to the neckline of Rostock). From the lower line of the collar to the right and left to lay 4 - 5 cm to Decorate the collar, as shown in Fig. 118, d.

Pattern pieces are numbered and show the direction of the grain lines.
 

Obtaining the modified pattern and cutting (Fig. 119) 

 Back. Back to carve out the pattern of the bodice of main dress. The middle pattern of the back when cutting to put the fold of the fabric. The seam on the sprout 0.5 cm at the shoulder cut 2 cm, to the armhole 1 cm side cut 2-3 cm, waist 3 to 4 cm 

 Shelf (Fig. 119, a). To move the shoulder Darts to make the cut lines from the neck to the end of the Darts, not dorezaya 0.5 cm Tuck to close, whereby the opening of the new dart in the neck. When cutting the pattern to put the middle shelves to the fold of the fabric. To increase or assemblies of soft folds in the neck to take the upper part of the pattern left on the 4 - 5 cm

 Skirt (Fig. 119, b). For the skirt pattern, flared front and rear panels for applying lines to cut and pin, pushing part of the pattern at the waist 3 to 4 cm (priborno). The skirt of this dress could be designed according to the principle of the skirt flared "bell" or "3/4 of the sun." For priborki the radius of the recess in the waist to increase at will.

 Bracket for rear cloth of the skirt (Fig. 119,). To carve out two parts. The middle pattern strap (item 4) when cutting to put at the bend in the fabric so that the direction of grain lines on the pattern and fabric match. 

 Strap for the front cloth skirts (Fig. 119, g). The fabric is folded in half face inward. Pattern strap (item 5) put on fabric so that the direction of grain lines on the pattern and fabric match, and push the two parts. 

 Collar (item 7) the Fabric folded in half face inward. Fold the fabric must pass on the bias thread. The middle pattern of a collar to put the fold of the fabric and push it. 

The seam and stocks is shown in Fig. 119.
 

Tailoring 

1. To celebrate the middle of the back and forepart cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew the Darts in the pulley-block, to press towards the middle of the product. 

4. To lay and sweep of soft pleats at the neckline or to gather an Assembly. 

5. Baste and sew the shoulder seams, not destrucive to neck 4 - 5 cm for processing fasteners in the shoulder seams. The seam to press in the direction of the shelves. 

6. Loop to handle one or two obrazkami on the collar and placket and priotity.

7. Collar to the shelf and back to bend in the middle, folding inside out inside. Unfastened part from bottom of collar to moisten, pull the iron, giving the collar the desired shape, then fold it in half face inward. Sweep from nasechek Cape collar to the clasp, sew, cut fabric in the corners, stitch resuturing. Remove the collar on the front side, releasing the roll from the top of the collar, prometti, priotity.

8. To make the collar lower portion on the front side of the neck and tack. Top to make Podkayne obtachku, to equalize the slices to pritchet 0.7 cm in all four layers of the seam to resuturing, the bend facing towards the inside, the second section of piping to hem by hand. 

9. Baste and sew the side seams of the bodice and resuturing. In the left side seam to leave nezastroennoe from the waist up 8 - 10 cm for Tachibana castle "lightning".

10. Sew seams sleeves and resuturing. To handle the bottom of the sleeve obrazkami. The ends of their stitch, seam resuturing, attach a facing the front side to the front side of the sleeve, tack and pritchet seam width 0.7 - 1 cm Seam primaqiune to resuturing, the bend facing towards the inside of the sleeve, releasing the roll from the sleeve by 0.1 - 0.2 cm, and promette. The second section of piping to bend 0.7 - 1 cm and hem to the sleeve by manual stitches. Slightly priotity obtachku, remove the basting, and then priotity until it is tight piping. 

11. To votate and vacate the sleeve in the armhole.

12. Baste and sew the seam of the skirt. On the left side to handle the incision length 10 - 12 cm for vrachevanie "lightning". 

13. Allowance for this when cutting on the bottom of the bodice, bend towards the inside, and prometti priotity. 

14. Tack the bodice to the skirt, putting his seamy side to the front side of the skirt and combining the middle of the back with the middle of the back of the cloth, the middle of the shelves mid front cloth skirt (for ease of primitivne the bodice to the skirt from the front side to invest in the middle of the dress a piece of cardboard, magazine, etc.). To pritchet bodice with front side in silk thread to match the product by 0.7 - 1 cm from the fold.

15. Hem skirts, flared to align on the figure after terminations grosgrain ribbon, and dress after the joining of the bodice to the skirt. In fitting with the ruler to find the shortest length of the skirt, mark the chalk line on the ruler, then evenly apply the chalk spots around the bottom of the skirt or dress. Then remove the product to lay on the table and cut the bumps on the bottom. The width of the sheet set in flared skirts must not exceed 3 - 4 cmAllowance given for filing the bottom, bend towards the inside, to pave the first outline at a distance of 1 - 1.5 cm from the fold, then cut the skirt to sew hand stitches, slightly Posiva the excess fabric. A full skirt, you can sew blind stitch a narrow seam on the machine. The lower section of the skirt to bend towards the inside by 0.5 cm prometti, to stitch on 0.2 cm from the fold, then bend again and stitch 0.1 - 0.2 cm from the fold. In the Shuttle, you need to insert silk thread to match the product. In the denser tissues of the bottom of the dress can be laced cross stitch.

16. To vacate a zipper in left side seam. 

17. Sew upper and lower strap on the right side of the slice, stitch resuturing. To fold down the top bar from the bottom (bottom bracket must be the top 0.3 cm) face inward, pritchet, remove the bar on the front side, straightening the seam, releasing the chute from the upper limit by 0.1 - 0.2 cm from the fold, and priotity bar. On the left side to cut the strap fastens with two hooks. Prepared the bar tack to the dress, putting it so that it covered the seam primaqiune bodice to the skirt. To attach the bar of concealed stitches.

18. To iron the dress and to sew on buttons.