Thursday, 28.03.2024, 21:27
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » A hundred styles of women's dresses

Dress with pleated inset on the front panel

Dress of fine plain fabric (sizes 44 - 52) or the small picture, one-piece. On the front panel pleated. In a cut line enclosing the zone of the clasp on the buckle. The back straight, at the waist in the side seams sewn into the waistband. 


Vtachnoy sleeve, three-quarter. Flatback round collar flows into the placket, snap buttons. 


This kind of dress is recommended for young women with underdeveloped Breasts. 


Drawing style lines on the pattern (Fig. 61) 


the Style developed by the pattern of the basic drawing dresses. 


 3аднее flag (Fig. 61, a). On the back of the height of Rostock up to postpone 1 cm and cut at the shoulder to the right 3 see Point 1, 3 to connect a smooth line. The middle of the back from the depth of the cut sprout up to continue at 1 cm and down 3 cm to postpone the Draw bar, as shown in Fig. 61. 


 The front panel (Fig. 61, b). From the top of the neck down to draw a line parallel to the center of the front panel to the bottom. Shoulder tuck to move the line under the box, which from the end of the shoulder tuck to hold the line to the intersection with the line insert. 


 Strap. To continue the line of the shoulder cut to the right by 1 cm and up to postpone 1 cm From the top of the neck to the left at the shoulder slice to defer 3 see Point 1, 3 to connect a smooth line. The middle of the front cloth from the depths of the neck up to continue at 1 cm From the points obtained the right to postpone the half-width of the strap, i.e., 2 cm, and the neck also to the left 2 cm. From the points 1, 2, 2 draw a line parallel to the middle of the front of the panel and is equal to the length of the strap, i.e. 55 cm, plotting points to connect. To make the bar at the mouth of the connecting point 1, 2 a smooth line.In lines the length of strap from the bottom of your neck, i.e. points 2, down to postpone 4 see Points 3, 4 to connect, as shown in Fig. 61 b.


 Belt. From the waist up and down to lay half of the belt width, i.e. 2 cm Length of the top line of belt 18 cm and the lower 15 cm 


of the pattern pieces are numbered and show the direction of the grain lines. 

Obtaining the modified pattern and cutting (Fig. 62) 


For applying the pattern lines to cut. 


 3аднее the cloth to make the pattern basic dress with no modifications. When cutting the middle of the pattern to put the fold of the fabric. 


 Strap to the back (Fig. 62, item 4). The middle of the pattern to put at the bend in the fabric the common thread and find the two parts. 


 The front panel (Fig. 62, 6). For applying the pattern lines to cut. To move the shoulder Darts to make nadziejko to the end of it, not dorezaya 0.5 cm Tuck to close, whereby the opening of the new tuck under the insert. When cutting the pattern, place it so the middle of the front was the common thread. 


 The insert (Fig. 62). Fabrics for pleated inserts requires three times the width of it. Insertion length equal to the length of the pattern plus 4 cm for the binder. 


 The bar to the front panel (Fig. 62, g) carve out for the right and left side shelves as shown in detail 3. 


 Belt. To carve out two parts two times wider patterns plus 1cm for the seam. 


The seam and stocks is shown in Fig. 62.
 


Tailoring 

1. To celebrate the middle of the front and rear panels dress slip stitch. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew Darts on back panel and side panel the front panels of the dress. 

4. To handle the belt to the back and to the front panel of a dress.

5. Hem the bottom of the insert, priotity seam. Pleated can be done by way of a tension common thread. To do this .the top slice insert that lines the bottom and the middle of the length of the insert to cause the width of the folds in the finished form, e.g. of 1 cm cut in the middle front of the flag is an inverted pleat, consequently, razmilovic folds need to start from the middle of the insert. At the upper and lower lines in each direction to defer to the width of the folds unfolded, i.e. 2 cm (Fig. 62, d), then the distance between the folds of 1 cm, again the width of the folds, etc.Once the folds are marked, and lay them on the top slice and the bottom (Fig. 62, e), and sweep. Then nail thin nails or using a thimble to attach the pins every fold of the trimming edge insert to have a sheet nekrashenaya table or Board. The hemmed edge is tight to pull and swept the folds attach to the table with pins (Fig. 62, g). Then the folds in the middle of the length of the insert to cover the slanting stitches wet Ironing pad, cover fabric inserts and priotity.Remove pins or cloves inside out through the wetted pad, again priotity, i.e. to dry the folds until it is tight. Not to split pleated from back waist to pave edge, or equity strip (Fig. 62, h), the ends of the edges to sew the seam primaqiune insert.

 NoteThe skirt circle pleated or pleated equity strip or edge is laid across the skirt at the hip line. 

6. Tack the belt at the waist to the side parts of the dress, baste the sides with a pleated, sew, simultaneously vracheva zone. 

7. Baste and sew the shoulder seams, stitch resuturing. 

8. Baste and sew the side seams, simultaneously vacate belt in the back.

9. To prepare the bar. Handle loop on the right strap one or two obrazkami in shared direction. Sew shoulder seams of the strap (at the top and bottom bars), stitch resuturing. Fold the top and bottom strips face inward, equating slices, baste, and sew along the upper cut of the strap, sew the strap from the bottom to the corner, twist it on the front side and straighten the seam, sweep it, releasing the chute from the upper limit by 0.1 - 0.2 cm and priotity. Inner fold inverted pleats at the middle front of the cloth to be cut into 14 - 15 cm for fasteners and process it.To attach the bar to the upper part of the front of the neck, equalizing sections, tack, aligning shoulder seams and straps of the dress, mid-back, with middle strap, to pritchet seam width 0.7 cm, seam to press toward the bar. Cut the bottom strap in the neck to bend 0.7 - 1 cm and hem by hand to seam primaqiune strap.

10. To votate and vacate harvested the sleeve in the armhole. 

11. Hem the bottom of the dress, to iron, to sew on buttons.



Category: A hundred styles of women's dresses | Added by: 20.10.2017
Views: 441 | Rating: 0.0/0

Total comments: 0
avatar