Friday, 29.03.2024, 02:11
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » A hundred styles of women's dresses

Dress with round neck and relief from shoulder

Summer dress of silk, fine wool or cotton solid or small patterns (sizes 44 - 50), cut at the waist line. 

The bodice adjacent to the undercut of the shoulder and slight drape at the end of podraza. 

Shelf with clasp in front, ending at the waist unfastened flap that is fastened to the belt with two buttons. 

The skirt is double seam, with a counter and two sided soft pleats at the middle front and rear panels. 

Sleeve one-piece, short. 

Round neckline.

Trim to the dress belt from bright striped fabric, wool dress can be of velvet or of cloth, matching color. 

Buttons to match the belt. 

A dress of this style can be recommended to young or middle-aged women of high and thin. 

Drawing style lines on the pattern (Fig. 170) 

the Style developed by the pattern drawing tselnokrajnimi bodice with short sleeve. 

 3аднее flag (Fig. 170, a) to Deepen and widen the cut sprout in about 3 to 4 cm waist Line is the cutting line of the back from the skirt. To obtain a flared skirt to put cut lines from the end of the pulley-block darting to the bottom. Distance from pulley-block darting to the side of the slice is split in half and apply a second cutting line parallel to the first. 

 The front panel (Fig. 170 b). To deepen and expand the neck for about 3 to 4 cm At the shoulder slice to cause the width of polyoxide equal to the width of the shoulder shelves plus 1.5 - 2 cm Г1о the first and second lines of the tucks from the shoulder cut put the 12 cm and from the top of the neck downwards, parallel to the line mid-front - 16 cm Draw a line of podraza of polyoxide, connect the dots 9 - 10, 12, 12, and 16, as shown in Fig. 170 b. To obtain the second soft folds from point 16 down to continue the line to the length of the tuck and fuse end it with the line.

By the middle of the front, from the bottom of the neck and the waist line to give allowance for visits by closure 3 cm, and the valve from the waist line to delay the left and down 3 cm From point 3 on the left side to defer up to 6 - 8 cm for podreza valve. 

To obtain a flared skirt to apply a cutting line pattern from the end of the pulley-block darting to the bottom parallel to the middle of the front cloth skirts. Distance from pulley-block darting to the side of the slice is split in half and apply a second cutting line of the pattern parallel to the first. 

Pattern pieces are numbered and show the direction of the grain lines.

Obtaining the modified pattern and cutting (Fig. 171) 

For applying the pattern lines to cut. 

 The backrest (Fig. 171, a) be cut out of the pattern, marking the middle of the pattern to the fold of the fabric. 

 The rear panel of the skirt (Fig. 171, b). To obtain the inverted pleats the middle of the pattern to move away from the fold of fabric 10 cm To rasciesa pattern for applying lines to cut. Traveling tuck to close and push the cut out parts 2 and 3 with a distance between them of 8 to 10 cm to obtain the soft folds. Bottom line parts 3 and 4 to push at 5 cm from the side of the slicer allow for rocklee 5 cm.

 Note. When cutting the flared skirts with pleats need to put the location of the folds to lay and sweep them, then putting the resulting pattern on the fabric so that the location of the fold lines on the pattern coincided with the laid pleats in the fabric, and then proceed to cutting

 Shelf (Fig. 171, b). To handle the closure and valve to give an allowance (if you have fabric width) 7 cm, i.e. the width of the valve plus 1cm for the seam. To the left shelf to otkroite obtachku common thread width 7 cm for the treatment of podtastic and Pedraza on the right shelf. From the shoulder cut along the lines of polyoxide make the cut. Close the shoulder dart on polyoxide, extending undercut to the point 16, then make the undercut from the end of the shoulder tuck and the rest of it is divided into two soft folds. 

 The front panel of the skirt (Fig. 171, g) to carve out the same as the rear. 

 Belt to cut out of the fabric finishing. Its width should be equal to the width of podraza valve plus 2 cm for seams (8 - 10 cm), and waist circumference plus 5 - 6 cm 

Allowance for seams and supplies shown in Fig. 171.
 


Tailoring 

1. To celebrate the middle of all of the parts of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. To lay soft folds on the shelf at the end of podraza of polyoxide (undercut to make the middle of the circle). 

4. The shelf sweep line podraza. Folded face inward sections of the shelves Polyacetal, combining snares, sew the inner seam starting from the shoulder cuts at the end of podraza place to nullify. The seam to bend in the direction of polyoxide, then pave on the front side of the finishing line with a width of 0.5 cm thread to match the product.

5. Handle loop on the right shelf, one or two obrazkami (one loop in the transverse direction, two on the flap in equity), baste, and sew tackle Darts at the back and the shelf. 

6. Baste and sew the shoulder seams, stitch resuturing or to press in the back side. 

7. Treating pajustiku the left side, fold the facing over the cut shelves face inward, baste, and sew.

8. Tack Podkayne obtachku for treatment of neck shelves to the allowance for machining clasp the right shelves. This allowance for this when cutting, bend the front of the shelves. Obtachku sew with the seam allowance and facing podtastic the left shelves, the seam resuturing. To pricecat the facing to the neckline and the germ (the seam of the piping should match the shoulder seam).

9. To handle the valve allowance given when cutting, to podraza valve. From the valve a slice of the allowance for processing of the right shelves to bend inside out, retreating 0.1 - 0.2 cm from the fold, and stitch. Excess fabric in the corners of the valve to cut off, turn it front side, straightening the seam, sweep, bend the neck facing on the front side, releasing the roll from the side of the neck and Rostock, sweep and priotity.The second section of piping bend on the wrong side, stitch, stepping back from the bend of 0.1 - 0.2 cm, then sew hidden stitches (valve handle after the first try, adding the length of Pedraza to pull the belt).

10. Tack and pritchet undercut the valve on the right пол6чке to cut the allowance for entry of fasteners left shelves. 

11. Baste and sew the side seams. 

12. Processing podkralas the armhole facing. 

13. Lay reciprocal and one-way pleats at the skirt. 

14. Sew the side seams of the skirt. 

15. To pricecat the bodice to the skirt bridging the seam. 

16. Hem the bottom of the dress.



Category: A hundred styles of women's dresses | Added by: 20.10.2017
Views: 442 | Rating: 0.0/0

Total comments: 0
avatar