Dress of thin silk or cotton plain or colored fabric (sizes 46 - 52), cut at the waist line. 


The bodice is shaped, stitched and finishing the stitching on the skirt. 


In the middle of the front bodice from waist laid soft folds. 


On the back of the line with a belt, the ends of which are sewn into the side seams. 


Flared skirt, cinched at the waist. 


The skirt may be straight, gathered at the waist, wedges or bottoms. 


Sleeve one-piece, short. 


Collar sew-on, like a sailor at the neck fastened flap snap button closure.


The collar can be made of fabric finishing, matching color with the dress. 


This kind of dress can be recommended to all women. 


The number of assemblies at the waistline depends on the body. 


Drawing style lines on the pattern (Fig. 140) 


the Style developed by the pattern drawing tselnokrajnimi bodice with short sleeve. 


 Back (Fig. 140, a). At the shoulder slice to expand the sprout is about 2 cm and place it. From point 2 to the right to defer the width of the collar 10 to 11 cm From the point delay down to 10 cm From point 10 draw a line to the intersection with the middle of the back. The length of the collar on the back of the point 10 to be shortened to 1 - 1.5 cm and draw the collar as shown in Fig. 140, and. 


The width of the belt on the back 4 cm 


 Shelf (Fig. 140, b). To expand the neck at the shoulder cut in 2 cm Depth of the neck should be equal to 7 - 8 cm Draw the neck as shown in Fig, 140 b. The width of the collar at the shoulder cut of 10 - 11 cm, the depth of the neck is 8 cm. From point 8 draw a line to point 10 - 11, point 10 - 11 - connect with a line.


From the waist line in the middle of the front down to snooze 7 to 8 cm and from point 7 - 8 - left 4 - 5 cm 4-Point - 5 connect with the waist line. The line from point 4 to 5 to the side of the slice is split in half and defer up to 1 cm, then the line cut of the skirt from the bodice to draw a smooth line. To move the wireline side and tucks to the middle of the front to cause the cutting line pattern from waist line to the end of these Darts. 


The skirt of the auxiliary line of an elongated bodice is split into four parts and from the points draw a line to the intersection with the bottom line. 


Obtaining the modified pattern and cutting (Fig. 141) 

 Back (see Fig. 140, a) be cut out of the pattern without changes. The seams and stocks give the side cut of 2 - 3 cm, at the shoulder and 1.5 - 2 cm, on neckline Rostock - 0,5 cm, waist - about 3 to 4 cm 

 Shelf (Fig. 141, a). For lines to move the traveling block and side tucks in a soft pleated pattern to cut from waist line to end tackle, then side tucks, not dorezaya 0.5 cm Lateral and traveling tuck to close, whereby the opening of the new tuck undercut by the figure of the bodice. When cutting the middle of the pattern shelves to put the fold of the fabric. For processing armholes and lower edge of bodice to otkroite obtachku a width of 3 to 4 cm 

 Collar (Fig. 141, b). In order not to disrupt the contour lines of the pattern, parts 2 and 4 of the collar to move the cutter or through thin paper, placing it under the pattern of shelves and backs. Details of patterns of collar to connect the shoulder cut, as shown in Fig. 141 b. When cutting the middle of the collar back to put towards the fold of the fabric at common thread and find one detail with no seam on the shoulder. To handle escape of the collar to otkroite obtachku a width of 3 - 4 cm 

 the Front panel of the skirt (Fig, 141 in). For applying the pattern lines to cut and push at the waist for assemblies 5 cm (on request, depending on tissue density), the bottom 15 - 20 cm (the entire width of the fabric). The middle of the front pattern cloth skirt to put to the bend of the fabric. The rear panel of the skirt to carve out the same as the front. 

The seam and stocks is shown in Fig. 141.
 

Tailoring 

1. To celebrate the middle of the shelves, back, collar, front and rear panels of the skirt of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Processing podkralas facing the unfastened portion of the collar. Fold facing and collar facing inside, pritchet seam width 0.7 cm, the seam resuturing. Fold the facing towards the inside, prometti, releasing the roll from the collar 0.1 - 0.2 cm, and prometti slanted stitches. The second section of piping to bend in the direction of the inside of 0.7 - 1 cm, tack to the collar and hem with hidden stitches.

4. To prepare the valve. Fold the top and bottom part of the valve face inside and stitch (lower part of the valve needs to be top 0.5 cm). To oblachat valve with three sides, turn it front side, straighten seams, prometall and priotity. To prepare the belt to the back. 

5. Baste and sew tackle Darts at the back. 

6. To lay soft folds on the shelf and hold them together at the waist line of transverse stitching. Processing podkralas a facing the lower sections of the shelves. To attach the facing face to the front of the shelves, tack and pricecat.

7. Fold the facing towards the inside, releasing the roll by 0.1 - 0.2 cm from the side shelves, slanted stitches to tack and priotity. 

8. Pave a rare double stitching on traveling to the cut of the skirt. The first place to lay, departing at 0.5 cm from the snare to the side sections, the second 0.7 - 1 cm from the first. To gather the Assembly, pulling the bottom thread machine stitch. 

9. Put a shelf on the skirt, aligning the snare, and pritchet wide finishing line, departing from the fold to 1.5 - 2 cm 

10. To fold the backrest and the rear panel of the skirt inside out and sew them from the inside of the back.

11. Tack the prepared belt to the side cut of the back, applying it to the middle of the belt rests on the seam primaqiune backrest to the rear panel of the skirt. 

12. Baste and sew the shoulder and side seams. To press the shoulder seam in the back side, the side towards mid front.

13. To make the collar wrong side to the front side of the bodice, aligning the slices. Tack valve top to put a slash or Podkayne obtachku 3 cm wide to Equalize the sections, tack and pritchet seam width 0.5 cm Seam resuturing, the bend facing towards the inside, releasing the roll from the collar 0.1 - 0.2 cm, prometti, the second section of piping to hem the dress concealed stitches. Lay a soft pleat on the collar and tighten up the valve with the button. 

14. Processing podkralas the facing armhole, hem bottom of dress to iron.