Dress of artificial silk (sizes 52 - 60), one-piece, with soft folds at the neckline, Welt pockets with leaflets. 

The backrest with one-sided pleat, darted from the traveling belt passes. 

Vtachnoy sleeve, short. 

Collar - telekrona stand. Trim - cut from a fabric of bright colors and buttons. 

A dress of this style can be recommended for larger women. 

Drawing style lines on the pattern (Fig. 101) 

the Style developed by the pattern of the basic drawing dresses. 

 The front panel. Due to the fact that the dress with double-breasted closure, a necessary feature to develop in the pattern unfolded. To move the shoulder Darts in the neck,the right shelves to divide into three parts, the upper point of division to connect with the end of the shoulder tuck the lines from the neck down delay 8 see the depth of the neck through the middle of the front down to delay 9 see Point 8, 9 connecting, continuing the line to the end of the shoulder Darts on the left panel of the dress, then draw a line on the waistline, touching the depths of tackle Darts.On the large size to the leaf of the pocket has not expanded the figure and the pocket was not large, the end of the Darts on the skirt to take the right side cut into 2 cm.

 Line the entrance to the pocket. From waist line to line Darts down to postpone the 6 - 7 cm and draw a line to the intersection with the side cut.

 The width of the leaves of his pocket. Point-6 - 7 line tuck to delay down 5 cm and draw a line parallel to the top line. 

The pattern of the left shelves shaped lines apply in the same way as on the right panel of the dress. 

Pattern pieces are numbered and show the direction of the grain lines. 

Obtaining the modified pattern and cutting (Fig. 102) 

 Back panel be cut out of the basic pattern unchanged. 

 The front panel (Fig. 102, a, b). For applying the pattern lines to cut.

To move the shoulder Darts from point 8 to make the cut, not dorezaya to the end tucks of 0.5 cm closed, whereby opening of the new tuck in the neck for soft folds. Note the shoulder width, to build tselnokrajnie rack. For this first line of Darts in the neck (Fig. 102, a) to continue arbitrarily up and the second to the level of the shoulder line, and then cut shoulder to continue from the point of intersection before beginning the left shoulder cut open a small tuck. To outline its contours parallel to the first (right) lines.

Line terminations are resistant to sprout up will be held on 8 - 9 cm, parallel to the first right line to her. Rack height is obtained randomly (8 cm). The width of the rack split in half. The line will bend the rack into a soft pleat. The neck in the soft crease to make nadziejko half the depth of the folds, lay it at the expense of what will get the stock for inclusion of the collar stand. In a small tuck from the shoulder cut to make nadziejko half its depth and seam allowance. 

When cutting along the line of the pocket on the left side to add 3 cm to stock. 

 The line of entry into the pocket apply on the first fitting. 

 The piece of paper to cut out (Fig. 102, C) on the pattern (part 3) on the twice folded tissue in an equity or cross thread. 

The seam and stocks is shown in Fig. 102. 

Tailoring 

1. To celebrate the middle of the back and front panels of the dress cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. To prepare the waistband for the back panels of the dresses. Its width in finished form should be 3 cm, and length equal to the distance between Darts plus 3 - 4 cm for the seam.

4. Tack belt, putting it on the middle of waist line. Sections of the belt to put it in the middle of the Darts, baste, and sew tackel tuck, stachivaya at the same time zone. 

5. Processing obecnie loop on the right panel dresses one or two obrazkami. 

6. On the neck lay a finishing edge with a width of 3 to 4 inches in cutting length is equal to the line of the neck. Sew sections of Kant's line of call boxes, to turn on the front side, prometti edge on the crease, priotity.

7. Tack finishing edging to the neck, applying to the crease of the piping was located downward. To equalize the slices. To impose from the top face a facing for the treatment of neck lines and length of the shelves, to equalize the cuts and pritchet seam width 0.7 cm Obtachku to participate to the notch in the middle of the soft folds. Fold the facing towards the inside, the second section of piping to bend 0.7 - 1 cm, lay the line, then attach hand stitches in several places.

8. Handle right Welt pocket. Bend line to bend the piece of paper, folding it inside out, sew the side sections of the leaflets to turn it on the front side, prometall and priotity. The upper part of the burlap pockets to attach the front side to the front side of the dress so that the whole sacking was located in the direction of waist-line, and the lower section of it went over the top line 0.5 cm Tack-prepared piece of paper, folding the front side to the front side of the pocket that the whole leaf was located down and slices it came out for the bottom line of the pocket at 0.5 cm.On top of the leaves to put the second part of the burlap pocket, equating slices with slices of the leaves, tack and pricecat the top and bottom of the burlap pocket, securing the stitching at the end of the pocket to the reverse stitching.

Cut the pocket from the inside out. At the end of the pocket to nadsech fabric at the corners, forming the corners remove the burlap towards the inside, straighten seams, prometall and priotity. Sew the burlap pocket, securing the corners with double stitching. The piece of paper with the front side from the line side of the slice to attach to the dress by hand. The location of the burlap pocket and leaves shown in Fig. 102, Baste, and sew the tuck on the right panel dress, at the same time vracheva leaf.

9. To handle the left pocket. The leaf slices to attach to the cut of the pocket, put the burlap face of the lining fabric, pritchet, peel back the burlap to the inside of the left shelf. Sew tackel tuck. The zipper sew the rest of the Darts, at the same time vracheva leaf. Sew burlap pockets from the inside out. 

10. Baste and sew the shoulder seams and press them towards back. 

11. Sew seams stand in the middle and resuturing. 

12. The soft pin tuck from shoulder line width of 2 - 3 cm Wmeat and vacate collar in Rostock.

13. To consolidate cross-stitching a tuck in the neckline. The second way of the stand to bend the 0.7 cm and stitch to attach the sprout or sew over the seam primaqiune. 

14. Sew side seams and resuturing.

15. Baste and sew seams sleeves, handle the bottom. For this purpose, the ends finishing piping sew, folded them in half. Finishing attach the facing to the sleeve inside out, equalizing the slices on top to put a facing, sew all four layers line width 0.7 cm, the seam resuturing. Then the bend facing towards the inside, the second section of piping to bend 0.7 - 1 SL, tack to the sleeve and hem concealed stitches. 

16. To votate and vacate the sleeve in the armhole. 

17. Hem the bottom to iron the dress, sew on buttons.