Asymmetric dress from solid-color fabric (sizes 48 - 60), cut at the waist line. At the bottom of the bodice is laid in soft folds instead of shoulder Darts and traveling. The shelf on the right curly bracket, the lower part of which is enshrined in the soft crease. The placket is fastened with three buttons. The back waist is gathered. On the front of the skirt strap, forming a pocket, Tacana in the side and skipped the cut in the Welt loop. 


Collar - telekrona stand. Sleeve vtachnoy, length seven-eighths.


This style can also be done from the fabric in a small cage. In this case the bar on the bodice and skirt to carve out with an oblique arrangement of cells. 


Drawing style lines on the pattern (Fig. 55) 


the Style developed by the pattern of the basic drawing dresses. 


 The backrest (Fig. 55, a). The height of the sprout defer up to 2.5 - 3 cm, the Middle of the back to continue to a level stand height, i.e. the point of 2.5 - 3 obtained point linking. From the point of intersection delay down to 0.5 cm to Make the rack, as shown in Fig. 55. 


 Right shelf (Fig. 55, b). From the top of the neck continue the shoulder slice to the right by 1 cm, then up to delay the stand height, i.e. 2.5 - 3 cm Obtained point to connect with the depth of the neck smooth line. A line mid-shelf, from the bottom of the neck to the waist line to divide into four parts. From the first point of division (top to bottom) the right to defer 1.5 cm from the second point 2 cm. Obtained point linking, as shown in Fig. 55 b.


To build straps from the depth of the neck right to defer 8 cm, and up from a point 8 - 2 cm From the points of 1.5, 2 and third points of division of the middle shelves to the right to defer for 8, see waist Line to the right to continue by 5 cm, all points connect smooth lines. From the lowest point 8 along these lines down to postpone 2 see Point 2 are connected with the ends of the pulley-block and shoulder tucks for transferring them in a shaped line.


 The front panel of the skirt (Fig. 55, b). Cut from a pulley-block darting to the side of the slice is split in half and build a tuck on the skirt depth 2 see the rest of the Darts 2 cm to make the side cut. 


 Pocket (part 3). On the second line of tackle Darts down to postpone 4 cm, and the side cut from the waist down - 9 cm, point 4, 9 connect. The resulting line is split in half and the dividing point down to defer 3 see Point 4, 3, 9 splice, as shown in Fig. 55 b. From the waist line in the middle of the front cloth skirts down to set aside 10 cm, and from the point 10 to the left - 7 see Point 7, 4 jointing, filling the length of the buttonhole for the valve. From point 3 down to postpone the width of the valve, i.e. 8 cm and from point 9 in side cut 8 cm, plotting points to connect, as shown in the figure. 


 Left shelf (Fig. 55 in). Tselnokrajnie rack to build as well as the right shelf. To move the shoulder Darts to apply a line cut from the tuck end to the middle of the shelves. 


 Cuff (Fig. 55, g). To build a rectangle with a length of 32 - 34 cm (length of cuff), width 8cm (width of cuff). From points 32 - 34 down to postpone 2 cm and draw the top line of the cuff. From points 8 inside the rectangle, to postpone to 4 cm and 4 dots connect with dots 2. Scallop cuffs hem 1.5 cm Draw a line terminations cuff, as shown in Fig. 55,


Pattern pieces are numbered and show the direction of the grain lines. 


Obtaining the modified pattern and cutting (Fig. 56) 


Back to carve out the pattern the main dress. To handle a rack on the back to otkroite obtachku wider stand for 3 to 4 cm (see Fig. 55, a). 


 3аднее cloth skirt. The middle of the dress patterns back the cloth to put, departing from the fold of the fabric on one-way fold (6 - 8cm). Give the seam and inventories of bottom 4 to 5 cm, side cut 2 - 3 cm, at the waist, 1.5 cm 


 Right shelf (Fig. 56, a). On the put the lines on the pattern from the middle shelf to make the cut by the end of the wireline and shoulder tucks, not dorezaya 0.5 cm Darts close, due to what appears new in the middle of the shelves for soft folds. 


 Left shelf (Fig. 56, b). For lines from center front to make the cut to the end of the shoulder tuck, not dorezaya 0.5 cm Shoulder tuck to close due to what appears new in the middle of the shelves. 


To the pocket to carve out two parts of the strap. 


With patterns shelves to move the cutter (or thin paper) in the form of the valve and cut it (Fig. 56,).


When cutting the lath (Fig. 56, d) to the right shelf to pin the pattern on the front side of the fabric. Cushioning fabric to otkroite 0.5 cm already. The facing to the front of the shelves to otkroite, as shown in Fig. 56, 


the seam and the stocks shown in Fig. 56. 


Tailoring 

1. To celebrate the middle of the back, shelves, front and rear panels of the skirt of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Tack on the underside of the strap cushioning fabric so that the lobe thread of this fabric passed through the length of the loop. 

4. Processing obecnie loop on the strap one or two obrazkami.

5. Tack the strap to the shelf, propositiva oval cut, putting the bar face to underside of shelves. To pristroit, starting from the notch in the neck, bend the bar, seam primaqiune also bend toward the bar and priotity. The second cut straps to bend towards the wrong side on 1 cm, tack, priotity and hem with front side hidden stitches.

6. Lay the lower section of a strap in a soft tuck on the right shelf, baste the tuck and sew, attaching a soft crease at the level of the transverse width of the strap stitching. Baste and sew the Darts on the left shelf, top to press the tuck down, traveling to the middle shelves. 

7. Baste and sew the shoulder seams shelves and back, bend the strut seam to dissect and resuturing.

8. Sew piping to handle the rack at shoulder seams, stitch resuturing, tack the facing to the front, folding inside out, aligning the shoulder seams. To pristroit, stitch resuturing, the bend facing towards the inside, releasing the roll from the side of the dress by 0.1 - 0.2 cm Tack slightly priotity, remove the basting, and then priotity until it is tight piping. The second section of piping to sew on the machine and attach to the dress in several places. 

9. Baste and sew the side seams, resuturing seam, then press in the direction of the shelves.

10. Baste and sew seams of sleeves, pritchet harvested with a cuff facing. Attach the lower part of the cuff to the front side of the sleeve, equalizing sections, tack, top to impose a facing of a width of 3 to 4 cm, tack it and pritchet all four layers. Resuturing the seam, fold the facing towards the inside of the sleeve, and prometti priotity. The second section of piping to hem the sleeves by hand. 

11. To votate and vacate sleeves. 

12. On the right panel of the skirt is to handle the equity facing the loop to pull the valve. Loop length equal to the width of the valve.

13. Baste and sew the pulley-block darting at front and back panels of the skirt. On the back of the bodice to double stitch rare stitch, gather, pulling the lower thread. To zastrochit unilateral pleated 20 - 25 cm in rear panel of skirt.

14. To prepare the valve. Tack the spacer to the underside of the valve. Handle loop on the valve. To attach the lining (lining should be 0.5 cm) face to face of the valve, to oblachat on the top and bottom sections, to turn on the front side, sweep out the chute with the valve on 0.1 - 0.2 cm, priotity, remove the basting, and then priotity until it is tight. Skip the valve in the loop on the skirt and pin manually to the facing loop. The second cutoff valve to vacate in the side seam. 

15. Baste and sew the side seams of the skirt.

16. Tack and pricecat the bodice to the skirt, hem the bottom, to iron and to sew.