Thursday, 28.03.2024, 13:18
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » A hundred styles of women's dresses

Dress with scalloped yoke, passing in the valve

Dress of thin wool, silk or cotton (size 44 - 56) with a shaped yoke from shoulder, ending with a valve below the waist, fastened with two buttons. 


The back straight telekrona. 


Collar - telekrona stand, turning into the side. 


The pocket flaps and the collar can be trimmed with other fabric to match the dress. 


Sleeve one-piece, short with gusset. 


A dress of this style can be recommended for beautifully proportioned, and with a protruding belly shape. 


In the latter case, it is desirable to make the pockets slightly lagging.


Drawing style lines on the pattern (Fig. 156) 


the Style developed by the pattern drawing tselnokrajnimi bodice with attached short sleeve and gusset. 


 The front panel (Fig. 156). The depth of the neck at the mid front of the cloth down to see 21 delay From the received point to the right and left delay to 3.5 cm From the waist line down to postpone 7 cm, and from the points obtained up - 3 cm From point 3 to the right and left to lay half the width of the valve, i.e., 3.5 cm the Obtained point linking, as shown in Fig. 156.


From the top of the neck at the shoulder slice to postpone the shoulder width of the shelf, i.e. 13 - 14 cm, and connect with a 3.5 point. 


 Collar. The depth of the neck down to postpone 3 cm and point 3 to connect the top of the neck continuing the line to the width of Rostock plus 1 cm, i.e. 7.5 - 8 cm From point of 7.5 - 8 to the right at right angles to these lines to postpone the width of the collar (4 cm). From point 4 draw a line parallel to the first line of the collar, to the level of the top of the neck and from this point right to postpone the escape width of the collar equal to 11 cm From the point 11 up to postpone 1 see For entry of fasteners from the top of the neck to the right to defer 3.5 cmThe line of approach of the shelves from the bottom of your neck down to postpone 13 cm and place unfastened portion of the collar, as shown in Fig. 156. Traveling tuck to move closer to the middle of the front panel. To do this, from the width of the valve at the waist to postpone the depth of the tuck, i.e. 4 cm, and place it. From Darts to put the cut pattern for obtaining draping. Side a tuck move in the middle of the front. For this purpose, the tuck end to connect with the line valve.


 Line the entrance to the pocket. From the waist line on the side cut down to delay 10 - 13 see the resulting point is connected to point a 3.5. The width of the valve pockets from a point 10 - 13 delay down to 7 - 8 cm Obtained point to connect with point to 3.5 dashed line, then bring the cutter pattern valve, attach it to the entrance line to the pocket and circle, as shown in Fig. 156. The remainder of tackle Darts on the skirt to move to the side cut off. 


The parts are numbered and show the direction of the grain lines.


Obtaining the modified pattern and cutting (Fig. 157) 

 Back to find the pattern unchanged. 

 Shelf (Fig. 157, a, b). For applying the pattern lines to cut. 

 The yoke (Fig. 157, a) to carve out of two parts so that the lobe thread was in the middle of the valve. To otkroite lower collar (two parts) over the entire width of the valve together with the seam. 

 The flank (Fig. 157, b). Side tuck to move to the middle of the front. To do this, make a cut from the Basque line to the end of the Darts, not dorezaya 0.5 cm Then caused lines of the pattern to be cut and push for 1.5 - 2 cm for draping. For the left shelves podkraj collar to make it without the Cape. The barrel pattern on the fabric to put to the equity thread was in the middle. To find two items together with the burlap pocket. The shape of the valve Korman to otkroite obtachku together with burlap. 

 The front panel of the skirt (Fig. 157,). The middle of the pattern to move away from the fold of fabric 10 cm for the counter-pleats. Fold down to make narrower by 1.5 cm Skirt to carve out along with a pocket flap. Podkraj valve to carve out together with the burlap pockets (two parts).
 


Tailoring 

1. To celebrate the middle of the front and rear panels of the skirt, backrest and shelves cushioning seam 

2. To lay a snare for the main lines and shaped patterns.

3. Lay the drape on the drums in the form of soft pleats or gather in the Assembly. 

4. On the right side of the yoke handle obecnie loop. 

5. Tack and pricecat the yoke to the shelf inner seam from the inside. The right yoke to pricecat to the notch of the valve. The joints bend in the direction of the yoke, tack, releasing the roll by 0.1 - 0.2 cm from its. 

6. Baste and stitch upper and lower collar in the middle, the seam resuturing.

7. Baste shoulder seams shelves and back. 

8. To votati lower collar in Rostock, combining the middle of the collar to the middle of the back.

9. Sew shoulder seams, collar vracheva at the same time in Rostock.

10. Tack and pritchet podkraj collar along with a Cape to the yoke at the unfastened parts. On the right the yoke podkraj to pricecat to the notch of the Cape. 

11. Fold podkraj valve with the bottom valve face inward, pritchet to the notch on the side slice the seam in the corners to nadsech, resuturing, turn on the front side, releasing the roll from the top of the valve by 0.1 - 0.2 cm, priotity.

12. Lay an inverted pleat on the front panel of the skirt, prometall, and sew from the waist down, not destrucive 30 - 35 cm (optional). 

13. Apply the skirt to the bodice, aligning the main lines of the pattern. Sew burlap pockets, primativa both the skirt to the left of the yoke, when it by bending the toe of the right yoke. 

14. Baste and sew the side seams shelves and back. 

15. To handle the bottom of the sleeve transverse facing. 

16. To lift the valve from the front side and pritchet skirt to the bodice before the pocket. 

17. To hem the bottom, attach the flap of the bib to the skirt concealed stitches. Sew on buttons.



Category: A hundred styles of women's dresses | Added by: 20.10.2017
Views: 433 | Rating: 0.0/0

Total comments: 0
avatar