Dress of plain or colored fabric (sizes 48 - 52), adjacent, below the chest line of the undercut, which laid the curly soft folds. Front clasp. Bodice with a low waistline. 

Straight skirt, with pockets and soft pleats. On the side cut down unilateral folds. The back straight, tselnokrajnie, with soft pleats at the waist. Sleeve one-piece, short. Stand collar cut out along with the shelves and back. 

Drawing style lines on the pattern (Fig. 161) 

the Style developed by the pattern drawing tselnokrajnimi bodice with short sleeve. 

 3аднее flag (Fig. 161, a). The height of the sprout to stand up to delay 3.5 cm and the middle of the back to continue to a level stand height, i.e. to the point of 3.5. Plotting points to connect, and from the point of intersection down to postpone 1 cm 

Instead of tucks at the waist to build pleats-pintucks (location and size is indicated in the figures). From the waist line on the side cut down to postpone 26 - 30 cm and from this point to the right - half of the depth of the folds, i.e. 6 cm 

 Front panel (Fig. 161, b). From the chest line down the middle of the front down to postpone 2 cm, and the second line shoulder tuck up 5 cm and place the undercut of the connecting points 5, 2 a smooth line. Shoulder cut to continue in the direction of the middle shelves 4 cm, and from the points obtained up to postpone 1,5 cm 1,5 Point to connect a smooth line from the shoulder cut.

From the waist line in the middle of the front down to postpone the 6 cm pulley-block Darts split in half and the point of division to connect with the point 6 a smooth line, extending it 2 cm to the right. By a line drawn from the middle of the front cloth left to postpone 4 cm and the remainder of the line to be divided into three parts.

From the waist line on the side cut down to postpone 11 - 15 cm and a point 11 - 15 to connect with the first point of division, then divide the line in half and from the points of division to defer down 1.5 cm plotting points to connect a smooth line which is a line cut of the skirt from the bodice. Traveling tuck can be left in place or moved, as shown in Fig. 162 b. To the line of mid front bodice to add 2 cm to the length of the clasp.

The height of the rack connect-a-half allowance for the setting of the fastener. On the side cut from point 11 to 15 delay down to 15 cm and the cut split in half. The breaking point to connect with the second point of division on the side cut. Point 15 connected to point 4 by the dotted lines as shown in Fig. 161 b. From the point 15 on the side cut to the left to save half the depth of the folds, i.e. 6 see 

pattern pieces are numbered and show the direction of the grain lines.
 

Obtaining the modified pattern and cutting (Fig. 162) 

For applying the pattern lines to cut. 

 The rear panel (see Fig. 161, a) be cut out of the pattern. To otkroite piping for handling the racks and openings. 

 Shelf (Fig. 162, a). For applying lines to cut the pattern from center front to shoulder tuck. Tuck closed, whereby opening of the new tuck into notched undercut for soft folds. To increase the depth of the crease to continue the cut line along the second line shoulder Darts to the shoulder of the cut, not dorezaya About 5 cm the Upper part of the shelves take up 1 cm On the line of the bottom shelves (Fig. 162, a) to give allowance for the burlap pocket 15 cm Piping for the treatment of neck and clasps shelves to find a common thread. 

 The front panel of the skirt (Fig. 162, b). To get the soft folds, the pattern cut from the shaped line, not dorezaya 0.5 cm to the side of the cut, and when cutting apart parts of the pattern with the distance between them by 4, see the Middle of the front pattern cloth skirt to put to the bend of the fabric. 

For processing the upper edge of the pocket to find a facing that is a burlap pocket (Fig. 162, C), after laid soft folds. 

Allowance for seams, folds and stocks is shown in Fig. 162.

Tailoring

1. To celebrate the middle of the front, rear panels and a waist seam cushioning.

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew pleats-pintucks at the waist on the back. 

4. In the middle of the shelf lay a soft tuck. On the inner fold of the tuck to gently pull and bend the top to hold freer and stitch for 4 cm from the middle shelf with fixing tuck cross stitching. 

5. Handle hinges on right front and sew shoulder seams.

6. Treating neck and Rostock pokrainini obrazkami. Sew the piping on the shoulder sections. Seams to resaturate. To attach the facing face to the side of the dress, aligning the shoulder seams of otacek, tack and pritchet her to bend towards the inside, straightening the seam, prometti, releasing the roll from the side of the dress. The second section of piping to bend to the inside by 0.5 cm, Pro-scribbling 0.2 cm from the fold and attach to the bodice.

7. On the front panel of the skirt (Fig. 162, b) for applying lines to lay soft folds, and sew to points 7 and 9. The ends of the pin tuck cross stitching. Stechenie tuck to bend towards the middle of the front cloth skirts.

8. Podkralas a facing-burlap to handle the upper section of the pocket (detail 3). Fold the facing and the front panel of the skirt along the line of the pocket's inside out and sew the seam width 0.7 cm, bend the burlap towards the inside of the skirt, straightening and sweeping up the seam, releasing the roll from the side skirts on 0,2 - 0,3 cm top cut of the skirt on the seam allowance to bend towards the inside, priotity, baste to the bodice seam iron, combining the silky bodice with silky skirt. Then sew from the inside seam bridging and simultaneous bridging of burlap pocket.In the corners where it is impossible to stitch on the machine, sew from the inside seam by hand-stitching.

9. Baste and sew the side seams, grinding off simultaneously cuts the folds. 

10. Fold to attach to the burlap pocket. 

11. Processing podkralas the armhole facing. 

12. Hem the bottom. Sew on buttons.