Dress made of fabric in small patterns (sizes 48 - 56), one-piece. On the front panel strap, turning into pockets. Back straight. 


Vtachnoy sleeve, three-quarter. Collar sewn with a flap, fastened with a button. The clasp on the shoulder. 


A dress of this style can be recommended to women with protruding belly. 


Drawing style lines on the pattern (Fig. 68) 


the Style developed by the pattern of the basic drawing dresses. 


 The front panel (Fig. 68, a). Waist from center front to the left to save half-width of the strap, i.e., 4.5 - 5 cm, and from the waist line on the side cut down to 12 - 13 see plotting points to connect the auxiliary line which is split in half, and from the point of division is down to postpone 2 see Point 12 - 13, 2, 4, 5 - 6 to connect a smooth line. From the waist line in the middle of the front down to postpone the 9 cm side cut from a point 12 - 13 to postpone the strap width, i.e. 8 - 9 see Points 8 to 9, 9 to connect the line to split in half and the dividing point delay down to 2 cm.Point 8 - 9, 2, 9 to connect a smooth line, as shown in Fig. 68.


Half of the shoulder Darts to move to the side cut, the other half under a shaped line. To do this, cut the side shelves split in half, from the obtained point to draw a line to the end of the shoulder tuck. To transfer the second half of the tuck to cause the line from the end of the shoulder tuck to shaped lines. 


 Collar to the shelf (Fig. 68, b). From the top of the neck at the shoulder cut to the left and up the delay to 3.5 cm and the right at right angles to a line drawn 1 cm plotting points to connect a smooth line. The depth of the neck at the middle of the shelves to defer down 3.5 cm, up to 4, see Point 1, 4 to connect a smooth line, extending it to the right 2 cm Point 3.5 to connect also a smooth line, continuing it on the width of the entry, i.e., 2 cm For the design of the Cape collar from the bottom of your neck to the right to defer 5 cm to Decorate the Cape as shown in Fig. 68, b.


 Collar to the back (Fig. 68, in). In the middle of the back from the depth of the cut sprout up and down to lay 3.5 cm the height of the sprout up to postpone the height of the stand collar, i.e., 3.5 cm the Resulting angle is split in half and the resulting lines to delay 0.5 cm At the shoulder cut to the height of the sprout to the right to defer 3.5 cm Draw the collar as shown in Fig. 68 V. 


Details of the patterns are numbered and show the direction of the grain lines. 


Obtaining the modified pattern and cutting (Fig. 69) 


 Back panel to make the pattern the main dress. 


 The front panel (Fig. 69, a). By applying the line pattern cut from the side of the cut, not dorezaya to the end of the shoulder tuck of 0.5 cm to Close half of it, whereby opening of the new tuck on the side cut. From shaped lines to the end of the tuck to nadsech pattern, the rest of the shoulder tuck to close and it opens at the gusset line of the bar. Side a tuck to shorten by 5 cm strap Pattern on the front panel cut just to the waist line. 


 Strap (Fig. 69, b). With pattern front cloth cutter to remove the strap form and cut them out. When cutting the pattern strips to put at the bend in the fabric. Podkraj to handle the lower part of the plate to carve out 2 - 3 cm above the waist line, but 0.3 cm strips. 


 Collar (Fig. 69, C, d). To find 6 items. For the front of the cloth (see Fig. 69,) 4 parts, and to the rear (Fig. 69, g) - 2 parts. The lower part of the collar to squeeze the upper 0.5 cm 

Sewing 

1. To celebrate the middle of the back, front panels, straps and the waistline seam cushioning. 

2. To lay a snare for the main lines and shaped patterns.

3. Podkraj for processing the bottom (escape) of the strap face to attach to the front side of the strap, tack and pritchet to the notch on the waist line. Remove the bar on the front side, straighten seams, releasing the chute from the straps on 0.1 - 0.2 cm, prometall and priotity. 

4. Tack and pritchet inseam placket to the front panel of a dress (part 2), folding them inside out, cut from the shoulder to the notch on the waist line (vacate the bar with bill weld).

5. Baste and sew tackle Darts, shoulder and side seams, stachivaya simultaneously in side seam placket. Before stitching the shoulder seams in the left shoulder cut to handle the clasp. 

6. Baste and sew the shoulder seams of the top and bottom of the collar. Fold the upper and lower collar face inward and oblachat around, leaving nezastroennoe 4 - 5 cm to turn it on the front side. The neck of the handle facing, cut on the bias thread. The width obtachki 3 cm, length equal to neck. 

7. Baste and sew sleeves to handle the bottom of the sleeves, metati and vacate the sleeve in the armhole.

8. To attach the lower part of the strap to the dress concealed stitches. 

9. Hem the bottom. To iron dress.