Dress of wool or heavy silk fabric (sizes 48 - 58), cut at the waist. Shelf with soft pleats from the neck, and scoring the valve, fastened two buttons. The back below the waist with a small overlap. Sleeve one-piece, long, narrowed downwards. The skirt is a narrow one-way front pleat and back. Dress has the appearance of a dress-suit. 

A dress of this style can be recommended to women of high growth. 

Drawing style lines on the pattern (Fig. 318) 

the Style developed at the pattern drawing on the basis of tselnokrajnimi sleeve and gusset. 

 Back (Fig. 318, a). To build the rack. The height of the sprout defer up to 3 cm mid-line of the back to continue to a level stand height, i.e. point 3, and plotting points to connect. From the point of intersection down to postpone 1 cm and from point 3 to the right - 0.5 cm to Make a stand. 

 The front panel (Fig. 318, b). To move the shoulder Darts in the top of the neck to connect with the tuck end. To build the rack. For this to continue the line of the shoulder cut at 1 cm from 1 up to defer 3 see Point 3 to connect the shoulder line smooth line. From the depth of the neck down to defer 5 cm From the point 5 draw a line to the intersection with the line of movement of the tuck. From point 5 to the left to delay 3 to 4 cm to Connect the stand height from point 3 to 4, making the cut square. To move the wireline tuck the fuse end it with the end of the shoulder tuck.From the waist line in the middle of the front down to postpone 15 cm, and lateral shear 17, see plotting points to connect. From waist line down the side slice to postpone 9 see Point 9 to connect with the first line of tackle Darts. This line is the entrance to the pocket.

Pattern pieces are numbered and show the direction of the grain lines.
 

Obtaining the modified pattern and cutting (Fig. 319) 

For applying the pattern lines to cut. 

 Back to carve out the pattern of the bodice with tselnokrajnimi sleeve and decorated stand. 

To vent from the waist line to add 3 - 4 cm 2 - 3 cm on the seam.

To otkroite obtachku to handle the rack. 

 The rear panel of the skirt to cut out with an allowance for one-sided folds. 

 Shelf (Fig. 319, a). In the lines to make the incision from point 3 to 4 by the end of the shoulder tackle and Darts. Tuck closed, whereby opening of the new tuck in the neck for soft folds. Then on the first line received tuck down to postpone by 5 cm from point 5 to the left to make nadziejko half the depth of the tuck. To otkroite obtachku for treatment stands common thread. 

 Pocket (Fig. 319, b). When cutting the pattern to put.to bend the fabric. Tuck remains on the gap pocket. 

 Side detail (Fig. 319, C) carve out together with the burlap pocket. From the entrance line to the pocket on the side cut length burlap must be equal to 6, see 

 the Front panel of the skirt (Fig. 319, g). When cutting to the middle of the pattern to add half unilateral folds 8 - 10 see Wireline tuck to reduce the depth, which half, i.e. 2 cm, to move under the fold. 

The seam and stocks is shown in Fig. 319, 

Tailoring 

1. To celebrate the middle of the shelves, the back, the front and rear panels of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns

3. Loop to handle one or two obrazkami in the neck. 

4. For lines on the shelf to lay soft folds in the neck from point 6 to make nadziejko to mid-tuck (shown in Fig. 319, a). Allowance for this when cutting the upper part of podraza, bend on the front side, sew with a seam allowance in the equity section, turn on the front side, sweep, cut from the inside loop to sew the seam of the loop.

5. Baste and sew the shoulder seams and the top seam of the sleeve. Sew Podkayne piping to handle the neck on the shoulder seam to resaturate. Attach piping front side to the front side of the neck, aligning the shoulder seams and the middle of the back. Tack, pritchet, stitch resuturing, the bend facing towards the inside, producing a roll from the side of the bodice 0.1 - 0.2, see Second section of piping in coarse fabrics to sew a cross seam, and in products from fine fabrics to bend the 0.7 cm and sew on the machine, then manually attach to the shoulder seams and the middle of the back.Scoring to put the valve in the neck on the bodice, mark the spot terminations buttons, combining the snare.

6. Baste and sew the side seams up to the notch of vrachevanie gussets. Baste and sew the bottom seam of the sleeve, Posiva line elbow sleeve backless not destrucive to the bottom 8 - 10cm for the clasp. 

7. To votate and vacate the gusset from the side of the bodice, bringing the line at the end of podraza 0.2 - 0.3 cm from the edge. 

8. To handle the lower section of the sleeve. Since the sleeve down narrow, hand on the bottom seam to process a fastener on buttons (see Fig. 319, d).

9. Loop to handle one or two obrazkami on pocket (detail 2).

10. To put obtachku-burlap to handle the entrance line to the pocket face to the side of the pocket, tack and pritchet, bend the burlap towards the inside, releasing the roll from the pocket by 0.1 - 0.2, see 

11. Prepared to put detail on the side part 3, combining the traps and the side sections, tack and sew the burlap pocket. 

Hem the bottom of the bodice. 

12. Baste and sew pleats in the middle front and rear panels of the skirt, as well as pulley-block tuck on the skirt.

13. To put the prepared lower part of the bodice with a patch pocket inside on the front side of the skirt equalizing wireline and the side sections, and tack. 

14. Baste and sew the side sections of the front and rear panels of the skirt. 

15. Tack and pricecat the bodice to the skirt, aligning the side seams. 

16. Hem the bottom of the skirt, to iron, to sew on buttons.