Dress of printed or plain cotton or silk cloth (sizes 44 - 58), cut at the waist with tselnokrajnie strap in the middle of the front, under which is laid on the breast drape. 


The placket and neckline trimmed with edging and finishing from fabric matching the dress. 


Strap attached to the dress with buttons. 


Skirt is straight, the front panel is inserted zaplanirovany wedge. 


Sleeve one-piece, short. 


A dress of this style is recommended for all women. 


For a short dress that can cut at the waist line, keeping the shaped line.


Drawing style lines on the pattern (Fig. 143) 


the Style developed by the pattern drawing tselnokrajnimi bodice with short sleeve. 


 The shelf (Fig. 143). The width of the neck at the shoulder cut must be equal to 5 cm For the shoulder tuck move closer to the line of the armhole by 1 cm From the bottom of your neck in the middle of the front down-set aside 10 - 12 cm From a point 10 to 12 right and left to wait for the half-width of the strap, i.e. at 2.5 cm From the depth of the neck down to postpone 4 cm, draw the neckline by connecting points 1, 4 and 2.5. From the waist line down to postpone the 16 - 18 cm and from the received point to the right and left - 2,5 cm to Make the strap length, the connecting point of 2.5 in the neck and on the skirt. From point 4 to the right to defer 7.5 cm Points of 2.5 and 7.5 to connect a smooth line parallel to the first, continuing the line up to 1.5 cm.To drape, and the end of the shoulder tuck to connect with the middle of the front, as shown in Fig. 143. For additional draping to draw a line cut from the middle front to the line of openings. Width bakey released from under the planks should be equal to 1 cm For the length of the strap right to postpone 1 cm and hold the dotted line parallel to the strap. As the width zaplanirovanay the details of the skirt is cut on the level of finishing borders of a strip from the dotted line the width of the borders draw a line parallel to the line of mid front of the skirt, to the hem.


Pattern pieces are numbered and show the direction of the grain lines.


Obtaining the modified pattern and cutting (Fig. 144) 


 Back to find on the pattern. Cut at the shoulder to extend the neck of Rostock 5 cm


 Shelf (Fig. 144, a). On the put line straps from the waist line to do the undercut to the end shaped line (dots 1,5), then cut the pattern to the end of the shoulder tuck. To close it, whereby the opening of the new tuck in the middle of the shelves for draping. To increase soft folds to make a second undercut on the put line from the middle of the shelf and slide the pieces of the pattern on the 8 - 10 cm When cutting the pattern of the shelves to put on the fabric so that the middle of the strap passed through the common thread. The left shelf to find a prepared pattern, but the length of the strap from the bottom of your neck needs to be 15 cm.To otkroite piping for treatment of neck 3 to 4 cm below the first button.


 Skirt (Fig. 144, b, C). To cut item 3 of the skirt for pleating 3 - 4 cm above the length of strap. Fabrics for pleated inserts must three times more than that of the workpiece 3. Detail 2 when cutting to put the fold of the fabric. The facing for the strap to squeeze the two parts by an oblique filament finishing of fabric width 3 - 3.5 cm and a length equal to the length of the strip. 


The seam shown in Fig. 144. 


Tailoring 

1. To celebrate the middle of the back, the front and rear panels of the skirt of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns.

3. Baste and sew tackel tuck and tuck drape deep podraza shelves. 

4. Baste and sew the shoulder seams and press towards back. 

5. Finishing fold the binding in half, wrong side inside, to sweep away the seams, priotity bake. The seams of the planks to bend 0.7 - 1 cm towards the inside, prometti, priotity without pulling the slant lines under the iron, place the bar at a finishing bake and baste. Podkraj for the treatment of neck and Rostock sew at the shoulder seams, stitch resuturing, the lower section of obcutek to bend in the direction of the inside of 0.7 - 1 cm, lay the line.

6. To impose podkraj prepared to handle the neck of the dress, aligning shoulder seams, tack and pritchet seam width 0.7 cm (prizing while finishing bake in the plate). Fold the facing towards the inside of the dress and hemming by hand. To lay a line from the front side by 0.1 cm from the seam primaqiune borders. 

7. To impose the right shelf to the left, aligning the middle of the front, and tack. 

8. Tack zaplanirovanno detail to the front panel of the skirt and vacate.

9. Baste and sew the side seams of the bodice and skirt. To connect the bodice to the skirt, aligning the side seams and Darts.

10. Topstitch the placket on the shelf and skirt, paving the stitching in the seam of primaqiune finishing borders. 

11. Processing podkralas the armhole facing. 

12. Hem hem concealed stitches, to iron the dress and to sew on buttons.