Dress made of fabric in solid color or small patterns (sizes 48 - 62), one-piece. 


Shelves with soft pleats from podraza below the chest line. 

Front panel dress with a high waistline, ending in a scalloped Cape, which is seamed with decorative stitching. 


Welt pockets with leaflets. 


Notched clasp ends unilateral crease. 


The back straight with one-way pleat. 


Vtachnoy sleeve, long, narrowed downwards. 


Collar - telekrona stand. 


A dress of this style it is recommended that the proportionally composed and full figures. 


Drawing style lines on the pattern (Fig. 89) 


the Style developed by the pattern of the basic drawing dresses. 


 3аднее panel (Fig. 89, a). By the middle of the back of the cloth to add 5 cm on one-way pleat. From the upper corner of Rostock defer up to 2.5 - 3 cm and from the received point to the left of 0.5, see the Middle of the back to continue up to 2.5 - 3 cm, Draw the collar as shown in Fig. 89. 


 The front panel (Fig. 89, 6). Shoulder cut to continue in the direction of the middle shelf for 1 cm and from the points obtained up to defer 2.5 - 3 cm, Draw the collar as shown in Fig. 89 b. The middle shelves from the depths of the neck to the waist line to divide into four parts. From the bottom division to defer to the right 2.5 cm on the length of the shelves, to the left is 12 cm, then the line from the middle of the shelves to the point 12 is split in half and the points of division to defer up 7 see the resulting points 12, 7, 2, 5 connect. Point 12 to connect with the first line modified pulley-block Darts.


On the second line of tackle Darts on the skirt to defer down 4 cm, side cut - 8 cm and to apply a line of the pocket, connecting point 8 and point 4. The width of the leaves of the pocket 4, see


By the middle of the front cloth of the dress from shaped lines to add 6 cm on one-way pleat. To lengthen the buckle from the waist by 19 cm design approach shelves from point 7 at the contoured line at a right angle in the middle of the shelf to the right to postpone 6 cm the height of the stand-up collar, deep neckline and point 6 to connect a smooth line, and then point 6 to connect the lower point of division on the middle shelves. For the formation of soft pleats on the bodice must be applied to the cut pattern from the point 7 to the end of the shoulder tucks and optional cut line, as shown in Fig. 89.For this shoulder cut from the second line of the Darts to the armhole split in half. The line from point 12 to point 7 is also split in half. The resulting point of division to join.


Pattern pieces are numbered and show the direction of the grain lines. 


Obtaining the modified pattern and cutting (Fig. 90) 

 the Rear panel (see Fig. 89, a) be cut out of the pattern with the addition to the seams. 


 The front panel (Fig. 90, a, b). For applying the pattern lines to cut. To do the undercut at the lines on the shelf, not dorezaya to the shoulder cut and the end of the shoulder tuck of 0.5 cm When cutting the pattern to put to the side lay the common thread. Shoulder tuck to close. For the formation of soft folds on the second line cut the upper part of the shelf (Fig. 90, a) to take up to 3 to 4 cm On the burlap of his pocket to add 10 - 12 cm.


Part 3 cut out the common thread, together with leaves and burlap pocket, as shown in Fig. 90 b. The leaves and the burlap pocket can be cut out separately, while the second part of the burlap to cut out the shape of the burlap details 2 of lining or main fabric. 


Allowance for seams, one-way pleat and reserves is shown in Fig. 90. 


Tailoring 

1. To celebrate the middle of the back and forepart cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew tackel tuck, zastrochit fold to the desired length with transverse fixing of the folds at the end.

4. On the put lines on the shelf (part 2) to lay soft folds. To pritchet burlap pocket (if not enough fabric on the burlap while cutting). 

5. On the right side of the front cloth treated otechnye the hinges and the clasp for the expense allowance of the fabric on the fold. At the end of the zipper seam allowance to the length of the shelves perestroit to the middle right of the flag. Left shelf processed separately podkralas the facing. The facing should extend beyond the middle of the front 1.5 cm Sew the crease. 

6. To handle the pocket. 

 The first option. If the leaves tselnokrajnie pockets with the bottom of the burlap pockets, the top edges of the burlap pockets to bend at the lines, folding the wrong side inside. 

 The second option. If leaves are cut separately, then harvested the leaves to make obraznymi edges for trimming the edge of the skirt, inside out. If the leaves are cut without the burlap, attach the burlap backing up and pritchet simultaneously with leaves.

7. To handle the upper section of the shaped line 3 detail on the chest at the expense of the allowance of cloth given during the cutting. Sections of stock to bend at the plotted lines on the front side. In the corners of the excess fabric, cut and sew sections as shown in Fig. 90, V. the Stitches in the corners to resaturate, bend towards the inside, and prometti priotity. 

8. Sew shoulder seams.

9. Sew Podkayne obtachku Rostock with the shelves facing at the shoulder seams. Tack the facing to the neckline, aligning the shoulder seams, pricecat the folding of the facing and neck facing inside, fold the facing towards the inside. Sweep, releasing the roll from the side of the dress by 0.1 - 0.2, see Second section of piping to oblachat on the machine and attach to the shoulder seams and sprout by hand. 

10. To lay soft folds on the shelf details 2, then apply the prepared item 3 on the shelf, combining snares.

11. Line traveling tuck cut edge of the part 3 to bend inside, prometti. To put a part 3 on the front side parts 2, combining the snare, and connect with her slanted stitches over the edge, picking up the needle two threads. The first undo to remove. Sew the parts from the inside out, continuing the stitching on the burlap pocket. Top shaped the line to Topstitch finishing line width 1 - 1.5 cm Sew side seams. 

12. Sew sleeve seam to resaturate. To handle the bottom of the sleeve facing. To votate and vacate sleeves in armhole. 

13. Hem the bottom. To iron the dress and to sew on buttons.