Dress in printed silk or cotton, or of fine wool (size 48 - 60), one-piece, flared. 

Above the chest line on the front panel shaped to the undercut that extends from the depth of the neck and ends below the waist line. 

On the bodice and the skirt, the undercut with soft pleats. 

Deep neckline trimmed with piping and bow made from fabric matching the dress. 

Vtachnoy sleeve, three-quarter, narrow. 

Bottom of sleeves finished with binding. 

The cut of this dress can be recommended to all women, except those who have long waist. 

Drawing style lines on the pattern (Fig. 124) 

the Style developed by the pattern of the basic drawing dresses. 

 3аднее panel (Fig. 124, a). The cut of the germ to extend at the shoulder cut into 4 cm, and the depth to increase 2 cm From the end of the pulley-block Darts to inflict a cut line parallel to the middle of the rear cloth of the dress to the hem and from the second line of the tucks at the waist - side cut. 

To raskleit skirt hem 6 - 9 see 

 the Front panel (Fig. 124, b). The neckline at the shoulder slice to expand to 4 cm, and the depth to increase by 13 cm and to form the mouth. Point 13 to connect a smooth line with the end of the pulley-block Darts and move it towards the middle of the front 1.5 cm to Make a tuck, as shown in Fig. 124 b. 

The first line of tackle Darts in the skirt continue to the hem, the second - to divide into four parts. On the side cut from the waist line to delay down 13 cm, and then from the received point - twice at the 5 cm Point 13, 5, 5 connect a smooth line with dots divided by tuck. To raskleit skirt hem 7 - 10 see

Pattern pieces are numbered and show the direction of the grain lines. 

Obtaining the modified pattern and cutting (Fig. 125) 

 3аднее panel (Fig. 125, a). For applying lines to cut pattern, starting from the bottom line, not dorezaya to the side cutoff of 0.5, see the Middle of the back of the cloth to believe to bend fabric, side skirt detail to take right to 12 - 15 cm for the formation of soft folds. For the processing of the germ to otkroite obtachku a width of 4 cm 

 the Front panel (Fig. 125, b). For applying lines to cut pattern, starting from the middle of the front and not dorezaya to the side of the slice and the end of the shoulder 0.5 cm Shoulder tuck tuck to close, whereby the opening of the new tuck through podraza. The pattern of the shelf to retract to the left, pushing each slit skirt at 3 to 4 cm in the soft folds.

When cutting the middle of the front cloth patterns to put to bend the fabric of common thread. From the hem to make the cuts of the pattern to the end of tackle Darts, then parts of the pattern to be expanded to 8 - 10 cm for the formation of soft folds. Side detail of the front cloth of the dress can be cut out separately. For treatment of the neck to cut out the facing of the transverse filaments with a width of 4 cm or to add to the neckline when cutting 4 cm (the seam allowance to the neckline shown by hachures). 

 Bow to find a common thread. Ready its length is 22 cm and width 2 - 3 cm.

The seam and stocks is shown in Fig. 125. 

Tailoring 

1. To celebrate the middle of the back and front panels, as well as waistline slip stitch. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew the Darts on the back panel of the dress, clipping on the waist line of transverse stitching soft crease. 

4. Tack and pritchet obtachku for processing of Rostock and neck, folding them inside out. 

5. To lay soft folds on the front panel of the dress. The skirt bend them up and on the shelf in the direction of the middle of the front panel.

6. Allowance for this when cutting along the upper cut of the plastron to bend towards the inside, put on the dress, combining traps and checkpoints, tack transfer of the stitch and pritchet from the underside of the bridging seam. 

7. To impose lateral part of the plastron, folding inside out, baste, and sew from the wrong side. 

8. Baste and sew the shoulder seams shelves and back, grinding off simultaneously piping the neck and sprout. 

9. Sew seams sleeves. To handle the bottom of his podkralas the facing, the width of which in the finished form needs to be 3 - 4 cm 

10. To votate and vacate the sleeve in the armhole.

11. Hem the bottom of the dress concealed stitches and iron.