Dress of plain light fabric in pinstripe or plaid (sizes 46 - 58), straight cut, poluprilegayuschy. 

Welt pockets with leaves, cut with straps. 

Strap vraboteni in the side sections, the bottom end of accordion pleats. 

Back telekrona, poluprilegayuschy. 

Sleeve short one-piece. 

Collar sew-on type "Apache".

Drawing style lines on the pattern (Fig. 244) 

the Style developed at the pattern drawing on the basis of tselnokrajnimi adjacent sleeve and gusset. 

 The front panel (Fig. 244, a). From the waist line on the second line of the tuck down to delay 5 - 6 cm, and side cut - 7 - 8 see plotting points connect a straight line, continuing it for side cut 2 cm Point 2 to connect with a side cut. From point 5 to 6 down to postpone the width of the leaves 6 cm and draw a line parallel to the top. From the side of the cut right to postpone 6 cm (strap width) and draw a line parallel to the side cut. From the depth of the neck down to postpone the length of the strip, i.e. 18 cm away From the point 18 to the right and left delay by 3 cm and draw a line parallel to the middle shelves. 

 Collar (Fig. 244, b). To construct a right angle from point A. From point A the right to defer 18 cm (semicircle neck) and up 5 see Point 5, 18 linking, the resulting line is divided into three parts. From the second point of division up to postpone 1 cm and draw a line terminations of the collar, connecting the resulting points with a smooth line.

From point B up to postpone the width of the collar (8 - 10cm), and from point 18 to the right to continue the line terminations 3 cm From point 3 up to delay 10 - 12 see Points 8 - 10, 10 - 12 to join, continuing the line to the right by 2 see Points 2, 8 connect. Issue unfastened the collar, as shown in Fig. 244 b. 

Pattern pieces are numbered and show the direction of the grain lines.
 

Obtaining the modified pattern and cutting (Fig. 245) 

 the Rear panel (Fig. 245, a) to carve out the pattern with the addition of side cut in half unilateral folds 6 cm, stepping back from the waist line to 13 cm down. 

 The front panel (Fig. 245, b, C, d). For applying lines of the pattern cut, 1 item to find on the pattern unchanged (Fig. 245, b). Strap width 6 cm is an allowance for half-folds (shown shaded). Slitting the front panel at the bottom of the leaves, the length of the cut is equal to the pocket's opening. 

 The leaf (Fig. 245, b) carve out together with strap. In order not to disrupt the contour lines of the pattern, translate the cutter, or through the thin paper pattern leaves with the strap. To the strap to add with one and the other side at 6 cm on polsladko, the leaf is 6 cm, i.e. the width of the bottom leaves, and 10 cm for the burlap pocket. The second part of the burlap to cut out separately. Its width is equal to the entrance of the pocket plus 2 cm for seams, and length 10 cm plus seams 1 cm. 

 strap Pattern (Fig. 245, g) put on the fabric so that the middle was the common thread, and cut out four parts (two upper and two lower).
 

Tailoring 

1. To note waistline, mid back and front panels of the dress cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew the Darts in the pulley-block on the rear panel. 

4. Baste and sew the side Darts. Handle loops on the shelf.

5. To handle pockets with leaflets. The leaf to bend at the fold line of the fabric, folded it inside out, sew, obtusate the end of it, to make nadziejko the burlap to the width of the seam, turn out, straighten seams, priotity. Fold the top part of the leaves and the product inside out, positioning the leaf so that the cut leaves is aligned with the line of the entrance to the pocket and pritchet on the lower leaf both layers of the seam width 0.5 - 0.7 cm (burlap) to the outer fold of the pleat to secure the stitching. The second part of the burlap to fold also with the product inside out.Pricechannel the leaflet with the strap to bend, then apply the second part of the burlap pocket inside out so that all of it was located to the side of the shoulder cut, and edging edge aligned with the cut leaves and pritchet parallel to the lower line to the side of the slice (distance between the stitches 1 cm). Cut the pocket from the inside, not dorezaya to the end of the line 1 cm Make nadziejko at the end of the line, burlap pocket fold inside out. To fix the double reverse stitching nadziejko at the end of the section, at the same time grinding off the burlap pocket.

6. On the front panel details 1. the allowance given to half of the folds to bend in the direction of the underside, lay the fold line on the bar, combining the snare, to sweep away sections of the folds, and sew on the inner bend with a seam width of 1 cm. 

7. Sew on buttons, capturing the upper part of the burlap and seam allowance to the fold. 

8. Baste and sew the shoulder seams and seams of sleeves.

9. Stock, this half pleat at the side edge front cloth skirts, bend towards the inside, baste, and sew the side seams, at the same time grinding off one-way pleat. The top part of her attach to the burlap pocket. To vacate gusset. 

10. On the top level processing loop. The line of approach of the strap to bend inside out inside. On the bar to the left of the shelf to put the bar on the right shelves, aligning the middle of them, the bottom strap to fasten. 

11. On the shelf edging edge of the neck to bend inward, making the notch in the corners, prometall and priotity.

12. On the front side of the prepared planks to put behind the shelf, combining snare, tack transfer seam (Fig. 245, d) and to stitch from the inside ends of the straps (four layers) in the depth of the cut, then pricecat upper limit from the beginning of the neck to the depth of it in the corners to take in the seam at 0.2 cm to Remove the basting, priotity.

13. The top collar is folded from the bottom face side inside, and sew at the unfastened side of the lower collar, Posiva in the corners of the upper collar. The seams in the corners to cut. Collar to turn on the front side sweep from the bottom of the collar at a distance of 0.5 cm from the edge, releasing the edge from the top of the collar at 0.1 cm Priotity. 

14. To vacate collar. Fold up the bottom collar on the front side of the product, vacate it in the neck to the bend of the strap, primativa at the same time the upper collar to the bottom bracket (podborta) to the shoulder seams. In this case the bar to keep the expanded view.

Seams primaqiune the top of the collar to podborta and the seam of the neck from the ends of the collar to the shoulder seams to resuturing, the rest of the seam on the Rostock to press toward the bottom of the collar. Cut the edge of the upper collar on the sprout to turn inside out and hem manually hidden stitches for the seam primaqiune the bottom of the collar. 

15. To handle the bottom of the sleeves podkralas the facing. 

16. Hem the bottom of the product.