Thursday, 28.03.2024, 14:43
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » A hundred styles of women's dresses

The dress without side seams with a pleated front panel skirt

Dress solid slim woolen or silk cloth (sizes 48 - 60) without side seams. The front panel of the dress below the waist line cutting and supressirovano. The shortage of fabric, the front panel can be smooth. Instead of shoulder Darts made notched neckline with soft pleats. From the neck to the side seams is figure strap attached to the dress on three buttons. The strap can be bystrocice pintucks. 


Back telekrona. Sleeve length seven-eighths.


This style of dress is not recommended for women with poor hips because it emphasizes the lack of figures. 


Drawing style lines on the pattern (Fig. 71) 


the Style developed by the pattern of the basic drawing dresses. 


 The front and rear panels (Fig. 71). On a sheet of paper to trace the pattern back cloth, removing rascles on lateral cut, and attach the pattern to the front panel close to the point of deepening the armhole match, then cut around the pattern front panel. Side cut to move to the width of the openings of the front panel and to build traveling tuck a depth of 4 cm On the rear panel to build also a tuck at the waist for the best fit figure. For more tuck from the width of the openings to draw a straight line on the hips parallel to the middle of the back of the cloth.From the point of intersection with the waist line to delay one side of 1 cm, i.e. the depth of the tuck (2 cm). Traveling tuck should not reach the chest line and the hip line by 5 cm


Tselnokrajnie stands for the height of Rostock, postpone up to 3 cm, the middle of the back to continue up to the level of stand height, i.e. up to point 3. Plotting points to connect, and from the point of intersection down to postpone 1 cm to Make the counter smooth line. 


On the front panel of the shoulder seam, continue to the right on the height of the stand, i.e. 3 cm from point 3 up at a right angle to postpone 1.5 cm to Make a stand, as shown in Fig. 71.


To obtain the soft folds in the neck to divide the width of the neck and half a point to 1.5 point division to connect with the end of the shoulder tuck. From the depths of the neck to delay down 10 see the cutting Line from the neck to the end of the shoulder tuck to split in half and the dividing point up to postpone the strap width, i.e., 4 - 5 cm From point 10 to postpone the right half of the strap width is 2 - 2.5 cm and point of 2 - 2.5 down to 5 cm For the setting of fasteners of the waist line the right to postpone 2 - 2.5 cm At the first line of tucks from the waist line down to postpone 8 cm and 15 cmTo make the bar connecting the dots 4 - 5, 2 - 2,5, 5, 2,5 waist, the end of the pulley-block and tuck point 15 smooth line. Second line to hold the strap parallel to the first distance is between 4 - 5 cm.


Pattern pieces are numbered and show the direction of the grain lines. 


Obtaining the modified pattern and cutting (Fig. 72) 


 Back panel of a dress with a shelf (Fig. 72, a). On the put line to cut the bar (item 3) and the front panel of the skirt (72, b) for pleated. To do the undercut half of the neck to the end of the shoulder tuck, not dorezaya 0.5 cm Shoulder tuck to close, whereby the opening of the new tuck for soft folds on the neck. In order not to disrupt the contours of the pattern parts 1 and 2, the pattern plate (item 3) to translate cutter.


When cutting the middle of the pattern of the cloth back to put towards the fold of the fabric, then measure the width of the pattern at the hip line. If measurement taken is greater than the width of the pattern at the hip line, then the pattern to be expanded to the difference between the measure of the semicircle of the hips and the width of the pattern at the hip line. In this case, instead of tackle Darts to make one side (see cut 72).


The pattern of the strap (Fig. 72) put on fabric so that the middle was the common thread. To find the bar from 4 parts. For processing tselnokrajnie stand otkroite piping to the back, and the shelf width should be 3 to 4 cm longer than the rack. 


The seam and stocks is shown in Fig. 72. 


Tailoring 

1. To celebrate the middle of the back, front cloth skirts and waist line cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew the pulley-block darting back and tackle the tuck on the front panel, located near the middle of the front, priotity.

4. Hem the bottom of the front cloth skirts for pleated, zaplanirovany. Fabric for pleated cloth requires three times more pattern details 2. 

5. On the top level processing loop of one or two obrazkami. Fold the strap inside out, sew in the unfastened parts, the seam grinding to resaturate, remove the bar on the front side, releasing the roll from the top of the strap, to prometti. 

6. The upper part of the strap to attach to the front side of the bodice, aligning the snare to tack to the waist line only the upper part of the strap, and waist both parts.

7. Attach the bottom bracket to the front side zaplanirovanay of the skirt (part 2), combining edging edge, sew all four layers of fabric at the waist, then bend the lower part of the strap, the seam grinding to continue to the neck. Press the seam toward the bar, cut edge of the lower strap to bend inside and sew hidden stitches for the seam protecive top. 

8. Tack and pritchet harvested and zaplanirovanno part of the skirt to the dress side cut. Start participate from the end of the second pulley-block darting to the bottom line.

9 Baste and sew the shoulder seams, to treat them from the inside out and to press in the back side. 

10. Baste and sew Podkayne piping neckline and sprout for treatment stands at the shoulder seams. Seams to resaturate. Then attach the facing face to the front of the unit, aligning the shoulder seams, tack, pritchet, the seams resuturing, the bend facing towards the inside, releasing the roll by 0.1 - 0.2 cm from the side of the product. Slightly priotity, remove the basting, and then priotity until it is tight piping.

11. Lay a soft fold at the neck and secure with machine stitching on the strap width. 

12. Baste and sew a seam the sleeves, resuturing it. The lower section of the sleeve to bend towards the inside of 0.7 - 1 cm, prometti, then down the sleeve to mark the cuff width (twice as wide as the shelf) and caused lines to pritchet bent the lower section of the sleeves by 0.1 - 0.2 cm from the fold. Razbitosti cuff-type sports sleeves. 

13. The prepared sleeve wmeat and vacate in armhole. 

14. Hem the bottom of the dress, to iron, to sew on buttons.



Category: A hundred styles of women's dresses | Added by: 20.10.2017
Views: 491 | Rating: 0.0/0

Total comments: 0
avatar