81 style 


Dress silk solid color or colored fabric (sizes 50 - 58), one-piece, sleeveless. 


On the front panel at the bottom Stacey flared wedges. 


Neck Cape. 


Back straight. 


Figaro (Fig. 277, a) with tselnokrajnimi trehchetvertki sleeve. 


Collar - telekrona front, notched neckline with soft pleats. 


The button placket. 


A dress of this style it is recommended that full women. 


Drawing style lines on the pattern (Fig. 278) 


the Style developed by the pattern of the basic drawing dresses. 


 The rear panel (Fig.278, a). To increase the neckline of Rostock at the shoulder cut into 3 - 5 cm Point 3 to 5 to connect with the depth of Rostock. To reduce the cut-out openings. For this side cut to last up to 2 - 3 cm, Draw armhole.


 The front panel (Fig. 278, b). The neckline at the shoulder cut to extend 3 to 5 cm, and the depth increased to 12 - 13 see plotting points to connect. To reduce the depth of the cut armhole same as back. To move the shoulder Darts in the side-cut to divide into three parts and from the top of the division to apply a cutting line to an end of the shoulder tuck. From a line drawn up and down to postpone 2 cm From the points to the end of the shoulder Darts to strike a line parallel to the first. For the distribution of the shoulder tuck tuck on the side cut to make the notch from the deposited lines by the end of it.


The length of the skirt in the middle of the front cloth split in half and the points of division draw a line to the side of the slice. The width of the skirt carried by line and bottom line to divide in half and apply the cut lines by connecting the points obtained. To build a wedge. The length of the wedge is equal to half the length of the skirt, i.e. cut lines, the width of the bottom 1B - 24 cm Wedge in Fig. 278, b is shaded. 


Obtaining the modified pattern and cutting (Fig. 279) 


For applying the pattern lines to cut. 


 The rear panel (see Fig. 278, a) be cut out of the pattern without the seam in the middle. If desired, the skirt can be wtaching wedges in the same way as on the front panel of the dress. 


 The front panel (Fig. 279, a). Lines for applying a pattern to cut from the side of the cut by the end of the shoulder tuck, not dorezaya 0.5 cm Tuck close, due to what appears three little tucks on the side cut. The middle of the front cloth to put the fold of the fabric and the skirt is cut on the plotted lines (assessment of patterns of wedges on the fabric shown in Fig. 279, b). Wedges can be cut out with different direction of grain lines (transverse, equity, oblique) depending on pattern of fabric. 


The seam and stocks is shown in Fig. 279. 


Sewing the dress 

1. To celebrate the middle of the back and front panels of the dress cushioning seam.

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew the pulley-block Darts. 

4. To vacate wedges. Vacate to one side of the wedge, combining edging and edge control points, then the second side. At the end of the section the width of the wedge to undermine, continuing the seam stitching up the cut lines on the 1 see 

5. Baste and sew the shoulder and side seams.

6. Treating neck podkralas the facing. Sew the ends of obcutek at the shoulder cut, the seam grinding to resaturate. Fold the facing and the product inside out, equalizing sections, tack and pricecat. Seam primaqiune to resaturate, to bend the facing on the underside, releasing the roll from the primary by 0.1 cm, sweep, slightly priotity, remove the basting and priotity until it is tight. The second section of piping to bend to the inside by 0.5 cm and stitch, departing at 0.1 cm from the fold, then sew to the dress concealed stitches.

7. To handle the bottom of the sleeve (armhole) podkralas facing a similar neckline. 

8. Hem hem, to iron. 

Drawing style lines on the Figaro pattern (Fig. 280) 

the Style developed at the pattern drawing on the basis of tselnokrajnimi sleeve without a gusset. 


 The backrest (Fig. 280, a). The height of the sprout defer up to 4 cm and from the received point to the left of 0.5, see the Middle of the back to continue to the level height of the rack. Plotting points to connect. From the point of intersection down to postpone 1 cm to Make a stand, connect the dots smooth line, as shown in Fig. 280. 


 Shelf (Fig. 280, b). To build the stand-up collar to continue the shoulder cut in the side middle shelves at 1 cm and from the received point to defer up to 4 cm Neck to split in half and the point 4 to connect with breaking point. To obtain the soft folds on the neck from the points of division to hold the line of the slit pattern to the end of the shoulder tuck. The middle of the shelves, from the bottom of the neck to the waist line to divide in half. From the dividing point to the right to postpone 6 cm to approach the shelves. Point 6 to connect a straight line with a breaking point of the neck and fluent line draw the bottom of Figaro.


Obtaining the modified pattern and cutting (Fig. 281) 

Back to carve out the pattern with built tselnokrajnie stand. 

 The shelf (Fig. 281). Lines for applying a pattern to cut from neck to end of shoulder tuck, not dorezaya 0.5 cm Tuck to close, whereby the opening of the new dart in the neck. When cutting the middle of the shelves to put the common thread. For processing fasteners to otkroite of podborta decorated on the shelf, i.e. after zatrachivaniya soft pleats, or the basic pattern. 

The seam shown in Fig. 281.

Tailoring of Figaro

1. To celebrate the middle of the back and forepart cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. To note checkpoint. 

3. Baste and sew the pulley-block Darts. 

4. Baste and sew the shoulder seams. 

5. Slightly pull the lower section of the sleeves concave line, then baste and sew. When grinding to make the tension of the tissue on the concave line. 

6. Tuck the neck be ground off from the inside from the neck down for 6 - 8 cm and fasten her cross stitching. 

7. Handle loop on the right shelf.

8. To handle the sprout, the neck and the bottom of Figaro pokrainini obrazkami. Sew the ends of obcutek at the shoulder sections, the seam grinding to resaturate. Impose face a facing on a front side of the product, aligning shoulder seams, tack and pritchet, then fold the facing towards the inside, releasing the roll from the Figaro. 

9. To handle the bottom of the sleeves. 

10. To iron and sew on buttons.