Wrap dress made of fabric with stripes or plaid (size 48 - 54), cut at the waist. 


The bodice is attached with tselnokrajnimi short sleeve and the cuff. 


Neckline round collar sew-on. 


Flared skirt with seam in the middle of the cloth back and sides. 


Pockets with soft pleats and a flap. 


Finish: collar, cuffs, and pocket flaps, cut on the bias thread. 


Drawing style lines on the pattern (Fig. 298) 


the Style developed at the pattern drawing on the basis of tselnokrajnimi adjacent sleeve and gusset. 


 3аднее flag (Fig. 298, a). The width and depth of the germ to increase by 4 cm to Make a sprout. From the lines at the shoulder and cut the middle of the back to postpone the width of the collar, i.e. 7 cm, and place unfastened part of it is parallel to the line terminations. From point 7 in the middle of the back right to postpone 2 - 3 see Point 7, 2 - 3 to join. 


Cuff width 5 cm, from shoulder cut to continue its 1 cm From the end of the pulley-block Darts in the skirt to cause the cutting line to the bottom parallel to the middle of the back of the cloth. For rasciesa the bottom of the skirt to expand by 5 cm 


 Front panel (Fig. 298, b). The width of the neck at the shoulder slice to increase by 4 cm, and a depth of 5 - 7 cm to Make the neck smooth line. From the depths of the neck to the right and to the left to save half-width of the strap, i.e. at 2.5 cm From 2.5 points, draw lines parallel to the middle of the front cloth to the bottom. Cut at the shoulder from the neck to the left, then on the second line of the strap down to postpone the width of the collar, i.e. 7 see Issue unfastened portion of the collar parallel to the line of the neck. From the collar strap to be shortened by 2 - 3 cm 


 Cuff to build the same as on the back. For moving the side Darts on the waist line from the end to draw a line as shown in Fig. 298, b. From the end of the pulley-block of the tuck to cause the cutting line to the hem, parallel to the middle of the front panel. For rasciesa the bottom of the skirt to expand to 6 see 


 Pocket. From the waist back Darts down to postpone 8,5 cm 8,5 points left to draw a line equal to the width of the pocket (13 - 15 cm). The length of the pocket 15 - 17 cm and its width at hem 14 - 16 cm To obtain soft folds upper edge of the pocket to divide it into three parts and obtained the point to connect the corners of the pockets. The width of the valve 5, see the bottom of the valve is longer than 3 cm Points 3, 5 to connect. 


Pattern pieces are numbered and show the direction of the grain lines.

Obtaining the modified pattern and cutting (Fig. 299) 

caused to the lines On the pattern to cut. 

 Back (Fig. 299). When cutting put the middle of the dress patterns back to the fold of the fabric. 

 The rear panel of the skirt (Fig. 299, b). From the hem to the end of tackle Darts in the pattern to cut, tuck closing, due to what happens rascles hem of the skirt. Receiving builds to the middle of the pattern of the cloth back to add 8 - 10 cm 

When cutting from a wide fabric, the pattern to be shifted from the fold of fabric 8 - 10 cm In this case, the skirt will be without a seam in the middle of the back of the cloth. 

 Shelf (Fig. 299,). In the lines to make a slit from the waist to the end of the side tuck, not dorezaya 0.5 cm Tuck to close, thereby to open the second tuck at the waist. When cutting to the middle of the pattern right shelves seam not to give. To the middle left to add 2.5 - 3 cm on the length of shelves and 7 cm for processing fasteners. 

 The front panel of the skirt to carve out a similar rear panel. The right panel skirt cut out without seam allowance to the length of the shelves, and left with an allowance of 2.5 - 3 cm in length and 7 cm for processing fasteners. 

 Collar (Fig. 299, d). The pattern of collar to translate the cutter, having enclosed under a pattern a clean sheet of paper. Detail pattern collar to the back of the shelf and connect at the shoulder sections resting on the fabric so that the direction of the grain lines on the pattern coincided with a partial thread on the fabric. To find four parts with the seam on all sections at 0.5 cm 

 Pocket (Fig. 299, d). Pattern pocket to translate the cutter, or through the thin paper. For applying the pattern lines, cut from upper edge to corner. The middle pattern of the pocket to the fold of the fabric. For the formation of the soft folds of the sidewall of the pattern to take on a 4 - 6 cm In the middle of the seam allowance on the soft crease make a cut the width of the valve pockets, i.e., 5 cm 

 Flap pockets (Fig. 299, e). The pattern of the transfer valve cutter and cut out four parts. 

 Belt. The width of the belt in the cutting of 8 - 10 cm, length is equal to waist circumference plus seam allowance and tie the ends of 6 - 8 cm 

 Strap to carve out a length equal to the length of the front panels (stachu bodice to the skirt), with a width of 5 cm plus 6 cm for processing. Equity the thread should pass along the straps.
 

Tailoring 

1. To celebrate the middle of the back, shelves, back and front panels of the skirt of the cushioning seam. 

2. To lay a snare for the main lines and shaped patterns. 

3. Baste and sew the Darts on the back and the shelf. 

4. Baste and sew the shoulder and side seams of the back and shelves. 

5. Baste and sew the back and front panel of skirt. 

6. To assemble the Assembly at the waist on the back panel of skirt rare double stitching.

7. To connect the bodice to the skirt bridging the inner seam (to smatyvay and sew on the skirt).

8. Process the closure of the right cloth items strap. Bar and the product is folded face inward, then fold the strap, stepping back from the mid-shelf in 2.5 cm to Postpone the width of the straps, i.e., 5 cm Middle strap should pass through the middle of the front panel. The rest of the width of the strap to bend inside out, the second cut to bend 0.5 cm Tack, covering the seam primaqiune strap to the front panel and pritchet, then the bar razbitosti.

9. To prepare the collar, folding the upper and lower collar facing inside, baste, and sew, making a landing on unfastened parts in the corners of the collar trim the excess fabric, turn the front side, straightening the seam, releasing the roll from the top of the collar. Prepared to iron the collar, tack and vacate in the neckline with bias facing. The second section of piping bend on the wrong side, then sew hidden stitches. 

10. To handle the bottom of sleeves patch cuffs.

11. To prepare the pocket. Bend on the wrong side of the seam at the bottom and side sections of pocket. Handle flap pockets, leaving the raw upper edge. To lay soft folds on the pocket. At the top of podraza allowance. this when cutting, fold inside out. To attach the front side flap to the wrong side of the pocket, equating sections. Grind down the cuts, fold the flap on the front side. From the inside of the pocket to bend the sections inward and sew hidden stitches to the valve. The upper part of the pocket to attach to the valve. Tack the pocket to the skirt, pristroit seam width 0.5 - 1 cm.

12. On the bar to prometti loop. 

13. Sew on buttons. 

14. Hem the bottom of the product.