Decorative seams. Masking and decoration of the join lines of two combined fabrics can be used various stitches, as well as all sorts of decorative braid, cord, lace, open knit. All these decorative elements can be used independently or in combination with one another.
The simplest ways to design connecting joints shown in figures 330, 331. In the first case, at the junction of the connection of tissues scribble crewel large-scale machine line. Then a needle with multiple thread enter under the front stitches, alternately top and bottom. It turns a beautiful zigzag line. During the return stroke of the thread you can skip again crosswise. For registration of another weld (Fig. 331) make a row of stalked seam;then through his facial stitches in those areas where near are two cut strands, drags a working thread that falls arc from stitch to stitch alternately on either side of a seam. Additional threads may be of a different color.
Figure 332 suture tissue connection closed rolikam of shiny fabric (brocade fabric with lurex). The thread of lurex strip on both sides decorate with cloves, made gladeville stitches. Instead, seam taped stitching, you can close funicom. Projections of vionica further accentuate the embroidery feet, consisting of 3 loops of the chain (Fig. 333). Same legs, arranged in a row one after another, also can be a decoration of the line connection. In this case, finishing the seam operate a thick fluffy thread of the third color, combined with both tissues (Fig, 334).
The line connecting the tissues may become hemstitch (Fig. 335) in that case, if you grind off fabric in a straight line filament. At a distance of 0.3 mm from the weld strikes for one or the other side and pull the thread and sew a simple openwork columns. Then fluffy woolen thread of crewel or lurex crisscross stitches alternately grab bars both using hemstitch and connect, forming a Lacy pattern.
The basis for decorative connecting two tissues may be more complex and frayed (Fig. 336). At a distance of 1.2-1.5 cm from the line of stitching and pull the thread on the band width of 1.3-1.5 cm from the edge and Then pull the threads up and down at a distance of 0.3-0.4 cm pull one or two threads and make the openwork punk. The other side of the frayed overcast, making stitches of equal distance. The seam connection of the fabric with one and on the other hand embroider the legs, consisting of 3 loops on the dark web thread, out light, and Vice versa. Joint design may be one-sided.On one of the connected fabrics, thread, torn from another, or matching the tone embroidered leaves equipment or surface applications (Fig. 337). Likewise, mask the seam a stitch, capturing both tissue. Thread should be selected so that they stood out well on both join tissues (Fig. 338).
Finish of rolica. Rulik of a thin fabric can be the material for the manufacture of different finishes: crocheted panels, collars and cuffs, embossed patch embroidery. To start manufacturing such finishing is necessary with the preparation of the pattern on the paper. Then of finishing fabrics, turn and turn rulik. To rulik was thinner fabric choose more delicate - chiffon, crepe de Chine, a fabric with a satin weave, lightweight silk knit fabric. Where necessary to join two fabric or sew beautifully carved details in the overlapping (on the shelves and the sleeves), you can use the openwork insertion linear.It is made from rolica or from pieces.
Figure 339 shows the finish that mimic the openwork. To accomplish this, first sew the edges of the parts to be joined. Ready sliced rulik lay out the pattern on paper straight bars and primetyvajut. Then a thin strand from the inside out gently manually attach roliki to the ACC details frequent stitches on both sides so that the edges rulykiv couldn't sleep. Upon completion of the work necessary to separate the detail from the paper. From pieces rolica you can perform more complex pattern. In this case the inside must be bonded roliki each other (Fig. 340).
Insert figure 341 is made of a whole rolica, so it is more durable. Roliki attach the butt to the ACC by grabbing it from the wrong side, and connect the center of the picture.
Detachable collar, cuffs or bodice dresses and blouses can also be done from rolica. The patterns can be quite complex and is based on the continuity of the lines (Fig. 342). If rulik, grind off, do it discreetly on the reverse side in the overlapping areas rolica under the loop.
The technique of manufacturing parts from rolica the same as in the manufacture of linear openwork inserts. All work is done on the paper pattern. The face of the paper lies with the front side of the trim. After careful rolica bonding between the inner side of a branch of the paper detail of iron through damp cloth. Parts made from rolica, you can also make embroidery - mesh (Fig. 343). Roliki you can connect on the machine. In this case, they prostrachivajut to paper, making the stitches in the middle.To connect roliki the pattern, make a few cross stitches, capturing two of the next link. Need to sew a silk thread to match rolica, as machine stitches remain on the product.
Decorative flowers. Decorative flowers - interesting finish. They will update any fancy dress. Colors can be done at home without special tools. Fabric for their manufacture you can always find in my wardrobe. For this purpose, suitable old blouse of nylon, chiffon, crepe de Chine, satin. Can be used and the residues of old reshape fancy dress.
Stylized flower in figure 344 is made of lightweight silk fabric. Preparatory work is in making ruffles, cut on the bias thread. One edge of it is processed on machine zakrutku, another gathering stitches on a thread (in two rows). Gathered frill rolled up in a spiral starting from the center of the flower and fasten every round on the bottom slice. The size of the flower depends on the width and length of the ruffles. Sew the frill should not be. The flower may consist of three, five, etc. segments ruffles. The ends of the lines draw an oval line (a).
In a similar way decorative rose (Fig. 345). Details - petals (a) is also cut on the bias thread. Their width should be equal to twice the width of the petal. Detail bend in half, combining the lower sections, and structure. Bend petals not priorivet, leave soft. Ready petals spread one after the other, turning the center funnel more freely to the edge and fasten thread. Open sections can be neatly lined with a circle of the same fabric.
Decorative flowers, figures 346 and 347 pre-embroidered details fabric: drive - by gladium roller, hand - looped seam. Then the parts are cut out and assemble them from individual flowers or whole bouquets.
Flower figure 346 is composed of long petals, which you can optionally embroider with a thread of lurex. The stamens are made of rolica and lurex and decorate with beads.
Figure 347 stylized bouquet. Each flower consists of three petals, embroidered with thread of contrasting color. The edges can be finished with beads. Soft pleats in the center of each petal give them a convex shape. Long leaves made in the same manner, collected into a bundle and attached to the flower. They should be free to fall and to be movable. Dress for a young girl decorate a bouquet of forget-me-nots (Fig. 348). Each flower embroider separately, cut out and attached to the stem, which consists of several threads, overlock stitch, seam or zakrutku on the machine. It can be crochet.
Decorative chrysanthemum (Fig. 349) can be made from thin rolica. The prepared pieces rolica fold loops and fasten at the base (a). All loops should be the same size, so the extra cut. The following rulik fold as well and attach to the first and so on until, until the chrysanthemum will become fluffy. The base of the flower is covered with a piece of cloth.