In Fig. 46 depicts a blouse that can be run from any thin or thick fabric. On the shelf jotted folds, which are hemmed lace. 

 Drawing lines style. The drawing of the pattern of this blouse, you must take the pattern blouse with set-in sleeves and razor line style (Fig. 47). 
Top tuck was transferred to a lateral cut (see "Simulation"). Parallel to the line of mid front at a distance of 3 to 4 cm from her conduct on two lines. 

 The layout pattern and cutting fabric (Fig. 48). When the width of the fabric 90 cm on a blouse with short sleeve 1 m 30 cm 1 m 70 cm blouse long sleeve.
Detail pattern of backrest is placed on the fabric, folded in half across the width of the bottom of the back, with allowance for the side seams, the middle line to bend. For the remainder of the width of the back fabric, lay the sleeves and the collar. For the front fabric fold the width in half, with fold on the left side. Pattern shelves are placed at 0.5 cm from edges. The seam shown in Fig. 48.

 Sewing. Zastrugivajut from the front side folds of silk threads in the fabric color of the blouse or darker. Smatyvay Darts, side and shoulder seams, do a fitting. After eliminating all the flaws start sewing. Sew Darts, zametyvayut them and priorivet. Sew side, shoulder sections and sleeve sections, seams rautureau, overcast. Hem bottom of sleeves and bottom of blouse. Handle collar (see "Simulation"). Umatyvaet it in the neck and stachivaya (see "Simulation"). Under the folds sew lace.