The drawing of the pattern for such a skirt (Fig. 110) must be removed following measurements (in cm):
Poluobhvat waist |
36 |
Poluobhvat hips |
52 |
Distance from waist to floor front |
100 |
Distance from waist line to floor at the side |
101 |
Distance from waist line to floor rear |
100 |
Distance from floor to bottom edge of skirt |
35 |
Back length to the waist line |
38 |
Draw the pattern of the cloth back. At the bottom of the sheet of paper is carried out in a horizontal line, which delay period equal to 1/2 of the measurements of poluobhvat hips, and put the points N and N1 (52 : 2 = 26 cm). Through the points N and N1 hold the vertical line up (Fig. 111, a).
The length of the skirt. From the point N up vertical lines lay the measure of the length of the skirt (100 - 35 = 65 cm) and put the point T. From the point H1 up on a vertical line lay the measure of the length of the side skirt (101 - 35 = 66 cm) and put the point T1.
The waist line. Points T and T1 connect by a dotted line.
The hips. From point T1 down the line flanks lay 1/2 measurements the length of the back to the waist line and put a point B (38 : 2 = 19 cm). Through point B to the left, spend a horizontal line. The intersection of this line and TN denote B1.
The upper section and tuck back the cloth. From the point T to the right of the line lay 1/2 scoops of poluobhvat waist plus 3 inches and put a point T2.
ТТ2 = 36 : 2 + 3 = 21 see
The dotted line between points T and T2, divided in half, through the point of division conduct a vertical line to the line BB1, the point of intersection with this line is denoted B2. From the point of division of left and right lay 2 cm and dot 2. From point B2 up along the dotted line lay is also 2 cm and put a point B3. Point 2 connect smooth slightly concave lines with the point B3.
Side cut. Point T2 connect the dotted line with point B. Divide the dotted line.in half of the points of division to the right, raise a perpendicular, on which lay 0.5 cm the resulting point connect a smooth line with points T2 and B. Line НН1 continue to the right by 2 - 4 cm and put a point of H2. Point H2 connect a straight line from point B. From point T2 down the line side of the slice measure measure the length of the side skirts (66 cm) and put a point H3.
The bottom line is. Point N3 connecting a smooth line with the H-point.
The creation of the drawing pattern of the front panels. At the bottom of the sheet of paper is carried out in a horizontal line, which delay period equal to 1/2 of the measurements of poluobhvat hips plus 2 cm, and put the points N and N1 (52 : 2 + 2 = 28 cm). Through the points N and N1 hold the vertical line up (Fig. 111, b).
The length of the skirt. From the point N up vertical lines lay the measure of the length of the skirt (100 - 35 = 65 cm) and put the point T. From the point H1 up on a vertical line lay the measure of the length of the side skirt (101 - 35 = 66 cm) and put the point T1.
The waist line. Points T and T1 connect by a dotted line.
The hips. From point T1 down the line flanks lay 1/2 measurements the length of the back to the waist line and put a point B (38 : 2 = 19 cm). Through point B to the right spend a horizontal line. The intersection of this line and TN denote B1.
The upper edge and tuck the front piece of cloth. From the point T to the left waist and lay 1/2 scoops of poluobhvat waist plus 4 cm and put a point T2.
ТТ2 = 36 : 2 + 4 = 22 cm
The distance between points T and T2, divided in half, through the point of division conduct a vertical line, on which lay 12 - 14 cm and put a point T3. From the point of division of left and right lay at 1.5 cm and put points T4 and T5. Points T4 and T5 is connected to the point T3 slightly concave lines. Points T4 and T5 connect solid lines, respectively, with the points T2 and
the Side cut. Point T2 connect the dotted line with point B. the dotted line is Divided in half from the dividing point to the left raise a perpendicular, on which lay 0.5 cm the resulting point connect a smooth line with points T2 and B. Line Н1Н continue to the left 3 to 5 cm and put a point of H2. Point H2 connect a straight line from point B. From point T2 down the line side of the slice measure measure the length of the side skirts (66 cm) and put a point H3.
The bottom line is. Point N3 connecting a smooth line from the point N1.
|