Dress for tennis, with shorts or shorts with a blouse (Fig. 152) can be made from any white fabric: poplin, REP, calico and even chintz. 
If the fabric is tight, the suit can be performed without the lining if loose fabric (calico, chintz), suit better to do on the lining. Fabric for lining may be the color of the fabric top or a different color (blue or pink).
The skirt can be done pleated, knife pleat in an Assembly or flared. The bodice is possible to sew with a low waistline, but if a woman has a low waist, a dress she do not recommended, in this case the skirt you need to sew to the bodice at the natural waistline. 
The neck depends on the selected style. 
The pants to this dress can be made from lining fabric (pink or blue). Briefs are recommended to sew a double.
In Fig. 152 (figure in center) depicted dress for tennis with an open neckline, with raised lines and with a low waistline. The skirt is a deep crease.

 Lines style (Fig. 153). The drawing of the pattern of this dress take the pattern blouse with set-in sleeves and it is applied to the line style. 

 Before. From the line of the armhole at the shoulder cut to the right lay 5 - 7 cm From the middle of the neck down lay 9 see Points 7 and 9 connect the smooth concave line after the top tuck will be closed. Through the middle of the front down from the waist they lay 2 to 7 cm and from this point hold to the left of the line parallel to the waist line. 
Cut from the shoulder through the armhole lay down 7 - 9 see Point 9 connected to the right side of the tuck of a smooth concave line. From the top of the upper tuck incision to make the embossed lines. 

 Back. From the line of the armhole at the shoulder cut to the left lay 8 cm From the lowest point of the neck down lay 9 see Point 8 and 9 connect a smooth concave line. 
Cut from the shoulder down through the arm openings lay 7 - 9 see Point 9 connected to the left side of the smooth convex tuck line. 

 The layout pattern and cutting fabric (Fig. 154). When the width of the fabric 80 cm product size 48 need 2 m 20 cm, skirt Length 40 cm in a cut, the shelf 35 cm
The pattern is cut along the embossed lines make an incision to the top of the tuck from the shoulder of the cut, close it, connect the line of the neck and do the layout on the fabric as shown.

 Sewing. Smatyvay tuck, relief lines, the shoulder and the side sections, do the fitting. 
After correcting all deficiencies start sewing dresses. To handle dress in two ways. 

 The first method. Sew Darts, zametyvayut them down and priorivet, grind, priorivet and overcast relief, shoulder and side sections. Also grind off and the lining. Then fold the lining with the bodice, right sides inside and sew neckline. Turn all parts on the front side and spawn at the neckline, forming the edge of a fabric top with a width of 1 - 2 mm Slice through the openings of top and a lining to buckle inside 0.5 - 0.8 cm and smatyvay together.Cut the top and lining along the hem of the bodice to buckle inside out, put between the upper and lower layer of fabric to the bodice, skirt and on the edge of the top part of the dress primetyvajut. Raised lines on the top part of the dress and lining smatyvay and all the parts sew on car (neckline, armhole, relief lines, bottom line).

 The second method. Smatyvay and grind off the details of the dress in the same way as in the first method. Overcast seams, neckline and arm openings is treated with a strip of cloth. External cut strips pulled a hot iron. Internal cut strips primetyvajut to the neckline and armhole and pritachivajut at a distance of 0.5 cm from the cut edge, strip folded inside out on the edge of spawn, forming the edge of the top fabric of width 1 - 2 mm. edge of the strip to buckle inward.and sew hidden stitches.
Line the bottom of the bodice seam allowance to buckle inside out, zametyvayut, priorivet, is applied to the upper edge of the skirt, primetyvajut and scribbled on the edge. For strength, you can Topstitch two lines, having their number.