In Fig. 95 depicts a summer sundress with a cardigan. 

 Drawing lines style. The drawing patterns this sundress and blouse pattern take a shift dress and it is applied to the line of cut (Fig. 96). 

 Before sundress. From the lowest point of the neck down through the middle of the front lay of 12 cm and put a point 12. From the point 12 to the left draw a line parallel to the chest line. To the right of this point lay 2 - 3 cm for seam allowance on the clasp and hold down a straight line parallel to the middle of the front, the top of the upper tuck connect a straight line with the top of the Darts at the waist and continue this line with a dotted line to the bottom of the dress. From the dotted line to the left bottom line lay 5 cm, put the 5 point and connect it by a straight line with the right side of the tuck at the waist line.Left side tuck continue a straight line down to 10 cm below the hip line, put a dot 10. From the hip line on the side cut also lay down 10cm and put a point 10'. Both points connect with a straight line. A tuck at the waist and tuck part of the top cut.

 Front of blouse. The upper tuck is transferred to the Breasts with the top on the middle line of the front. From the highest point of the shoulder cut to the left at the shoulder cut lay 3 see the resulting point connect straight dotted line with the point of intersection of the middle of the front and the chest line and continue this line in an arc to the left as shown in the figure. 

 The back of the sundress. From the point of intersection of the chest line with the mid line of the back lay up 2 - 3 cm, dot 3. From point 3 to the right parallel to the breast line draw the line. From the hip line down through the middle of the back lay 10 cm; put a dot 10" and carry through it in a straight line parallel to the hip line. 

 The back of the blouse. From the highest point of the shoulder cut to the right lay 3 cm From the bottom of the neck of the back down through the middle of the back lay 3 cm, both points connect smooth concave dotted line. From the waist up through the middle of the back lay 4 - 6 cm and conduct the dotted line up to the side of the slice. 

 Wedge. Measure the distance on the back of the shelf and between the points 10" and 10, divide this distance by the desired number of wedges, is added to each wedge of 3 cm on the seam and 2 - 3 cm for Assembly. The middle of each wedge must be located at the common thread. 

 The layout pattern and cutting fabric (Fig. 97). When the width of the fabric 90 cm product size 48 3 growth need 2 m 90 cm of fabric. 
The fabric is folded in half and put fold up. Detail of the pattern of the front placed at a distance of 1 cm from the edges, then stack the rest of the details. From the top of the canvas cuts the back of the dress and the details of podborta from lower - back blouses, piping for podchinenija sleeves, bottom of blouse and camisole. Backless blouses and sleeveless cut out without a seam in the middle. The seam shown in the picture. 

 Sewing. Smatyvay front embossed lines, the side sections and all the wedges between them. On the top, in place of the transferred tuck, lay two small folds, smatyvay shoulder and side sections, then do the fitting. After eliminating all of the disadvantages of embarking on sewing the pinafore and blouse. The sundress sew, rautureau and overcast all the seams. Handle the upper part of the sundress obrazkami, primetyvajut treated straps, namachivajut of podborta, grind them, turn on the front side and prostrachivajut silk thread in the color of the sundress at a distance of 2.5 cm from the edge.Sew buttons at the waist line sew a hook. Sew, overcast and rautureau seams wedges, top wedges are building on sbrocchi. Bends the lower section of the upper part of the sundress and wedges primetyvajut, then the silk thread from the front side scribbling at a distance of 1.5 - 2 cm from the edge of the bend.
Grind and rautureau seams of her blouse. The neckline and hem of the blouse treated with obrazkami.