Chapter 3. THE DRAWINGS OF THE PRODUCTS ADJACENT SILHOUETTE 

Adjacent silhouette is recommended mainly for modeling light clothes for young people. A constructive solution of the specified range you can use the basis of adjacent silhouette, placed in section II.
The silhouette form is solved for models with one-piece shelves and back with vertical raised seams. But with the same result in the simulation of the shelves and back of the product adjacent silhouette, you can use the basis of a semiadherent silhouette, but with a tighter fit in the waist. Shell 2 can be also used to build models of patterns of adjacent silhouette tight fit in the waist. This method of constructing patternscan be used for products with cap sleeves, bodice softand in the dense fit of the diaphragm, waist and hips. Line the waist can emphasize a wide casting belt, the undercuts on the bodice and skirt. The building patterns for products of adjoining silhouette with a bodice of soft forms shown in section III.
To build individual patterns details (sleeves, collars) used techniques, which are described in the heads of the relevant names. 
The silhouette of the skirt and its fit can to decide in each individual case in accordance with the proportions of the figure. Skirts can be very diverse: straight and narrow, of moderate width, gathered waist, flared, flared with pleats. 
The Appendix presents a dress of adjoining silhouette with a different form of sleeve, neckline, collar.

Dresses-costumes (Fig. 29 - 31) can be made from wool, silk and linen fabrics, denim fabrics, synthetic knitted fabrics. 

Sets of blouses and skirts (Fig. 32 and 33) to complement the jacket (Fig. 34). Recommended skirt with pleats press or soft. 

Casual dress (Fig. 35 and 36) can be worn with various additions.
The attached silhouette form made two dresses (Fig. 37 and 38) horizontal and curved lines podraza. The location of the line of podraza may vary depending on the proportions of the figure. The degree of fit the bodice at the waist (Fig. 37) is selected depending on features the shapes and properties of the fabric. Sometimes the bodice is possible to make a straight line for the pattern, built on the basis of 2, with the movement tuck a slice the arm openings. 

Kit (Fig. 39) from sundress and blouse adjacent silhouette will be interesting to look with a different neckline shape, with straight and extended sleeves.
Dresses adjoining silhouette (Fig. 40 and 41) are recommended with cap sleeves. The construction of patterns for such products are shown in section 11.

The design of the bodice with drape (Fig. 42) is not difficult task. It is performed in accordance with the methods of constructing the bodice mild forms are outlined in section III. Details for draping kroyatsyaseparately at oblique direction of the thread. Along the lines of the side sections details gather at the Assembly and grind off simultaneously with the side sections of the bodice. The long ends of both parts tie in back. To avoid pulling the backrest forward when tying the ends draped details the back is better to strengthen the fabric, the length of which is slightly smallerthe width of the back. The width of the strips is the same as the width of the draped details on the side cut.
Dress (Fig. 43 see Annex) cutting below the waist line or on waist line can be selected the quality of clothing for a special occasion. The collar can carve out two ways depending on the properties of the tissue: in the form of strips of the desired width at oblique to the direction of the thread; the principle of building skirts cut "sun". 
Pattern dresses with bodice big voluminous shapes in Fig. 44 is possible to on the basis of the drawing in Fig. 61, using the method of constructive modeling.